Shop finishing equipment at Print & Finishing Solutions.

The MBM AeroDieCut is a die cutter with a twist. The fun twist is the fact that it’s the first Die Cutter that can safely use existing traditional platen dies so there is no need to have new expensive steel dies made - plus it can cut, crease, perforate, and emboss in a single pass.

• Small die adapter chase included
• Patented Tri-suction feeding
• Multi-up ability: up to 5 times per sheet
• 4.3” colored touch screen
> Learn More

Handy Drill with 2-1/2” lift capacity. Machine can be converted to a 2” maximum lift capacity for a wider range of available hole sizes (1/8” to 1/2").

• Safety features
• Conveniently located chip collector cups
• Adjustable backgauge stops
• 4 different drill bit sizes (1/4”, 5/16”, 3/8”, 1/2") > Learn More

A manual, foot pedal operated drill with 2" drilling capacity. Auto-trip side guide for multi-hole patterns.

• 2" Drilling Capacity
• 13 Hollow Drill Bit Sizes
• Foot Pedal Operation
• Automatic Paper Chip Removal
> Learn More

Powerful 3-Head Hydraulic Operation drill with fast and easy adjustments.

- 2-1/2" Drilling Capacity
- Fast and Easy Head Adjustments
- Automatic Drill Return
- Auto-Trip Side Guide (optional) > Learn More

Drilling of up to 5 holes (3 heads come standard) in a single stroke. Handle multiple hole patterns in a single stroke. 2½" drill capacity.

• Side Guide Adjustments
• Backgauge Adjustments
• Easy Drill Length Adjustment
• 2" Hollow Drill Bits Available in 13 sizes
• 2-1/2" Hollow Drill Bits Available in 4 sizes > Learn More

High production and heavy-duty drilling of up to 10 holes in a single stroke makes the MS-10 the ultimate drilling machine.

• Drills Up To 10 Holes in One Stroke
• Maximum Drill Bit Diameter 1/2"
• 2-1/2" Drilling Capacity
• Powerful Hydraulic Operation > Learn More

Dependable automatic folder that comes pre-programmed with 18 standard folds. Up to 12 custom jobs can be stored in memory.

• Features automatic folding position setting
• Folding patterns can be stored and recalled via touch screen
• Fastest folding speed in its class > Learn More

The ultimate book trimming solution necessary to be competitive, the Challenge CMT 130TC book trimmer is built from steel and cast-iron. The system can be configured as a hand-feed off-line trimmer for entry level cost-effective book finishing. Made in the USA.

• Powerful hydraulic cutting and clamping pressure
• Cuts up to 2” book
• 10.5” color touch screen display
• Easy to operate > Learn More

The new Challenge CMT 330TC has expanded capability to finish cut LANDSCAPE FORMATTED BOOKS up to 12.1” tall by 12.9” wide and down to 5.875” tall by 3.937” wide. Made in the USA.

• Powerful hydraulic cutting and clamping pressure
• Cuts up to 2” book
• 10.5” color touch screen display
• Easy to operate
> Learn More

The system will save binding service providers an average of 40% in process efficiency, dramatically reducing overall costs. Handling the widest range of media, the system delivers unparalleled flexibility and enables concurrent binding operations.

Eliminate 4 manual steps:
• Collation of covers, index tabs and inserts
• Punching of covers, index tabs or inserts
• Paper lift punching
• Separation of book stacks after punching

Other:
• No color slip-sheets by book/section required
• 7” Screen Display
• Punching Speed: Up to 10,800 sph
• Perfect for short-run, on-demand jobs
• Easy programmable job set-up > Learn More

The HD7700 Ultima is the top of the line heavy duty durable Table Top Punch that has no equal. The patented Quick Change Die System has all of the features you have come to expect from Rhin-O-Tuff, making this a Performance Design Punch that will handle any size project, large or small.

• 14” (356 mm) open ended extra capacity die
• Punch capacity: 55 sheets or 110 pages, 20 lb. bond paper
• Automatic and Manual Reverse
• 3 year manufacturer warranty > Learn More

The Rhin-O-Tuff ONYX series presents a premium electric open-ended table top punch that is convenient with a stylish look. Design from a heavy-duty metal fabrication, the HD7000 Onyx is constructed for long-lasting life. It has an impressive 14 inch open ended punch that can accommodate a variety of document sizes and features the patented “quick change” die system for changing punch patterns in 30 seconds.

• 14” (356 mm) open ended extra capacity die
• Punch capacity: 40 sheets or 80 pages, 20 lb. bond paper
• Diesengageable dies
• 3 year manufacturer warranty > Learn More