Filter Results
- Manufacturer
-
- Challenge
- Fujipla
- Summa
- KAMA
- MBM (39)
- Akiles (35)
- Horizon (34)
- Morgana (32)
- Preferred Pack (28)
- FastBind (10)
- Graphic Whizard (10)
- Formax (9)
- Rhin-O-Tuff (9)
- JBI (6)
- Vivid Matrix (3)
- Tamerica (2)
- Mimaki (2)
- Amerilam (1)
- Bauman (1)
- GBC (1)
- Martin Yale (1)
- Perfecta (1)
- CUTWORX (19)
- Foliant (12)
- Graphic finishing partners (7)
- Micron (7)
- TEC Lighting (2)
- Valiani (2)
- Baum (1)
- Powis (1)
- Lami (1)
Shop finishing equipment at Print & Finishing Solutions.
-
KAMA ProCut 76
GM-PER-KAMAPRO_CUT76The versatile ProCut 76 is suitable for many different applications and is a perfect, state-of-the-art successor for worn-out cylinders and platen presses that are past their use-by date.
• 10 Application in 1 machine
• Electronic double sheet detection
• Hot foil stamping 50% faster
• AutoRegister for finishing with highest accuracy
• Fast changeover
> Learn More -
Challenge Handy Drill
GM-CMC-HANDYDRILLHandy Drill with 2-1/2” lift capacity. Machine can be converted to a 2” maximum lift capacity for a wider range of available hole sizes (1/8” to 1/2").
• Safety features
• Conveniently located chip collector cups
• Adjustable backgauge stops
• 4 different drill bit sizes (1/4”, 5/16”, 3/8”, 1/2") > Learn More -
Challenge JF Single Spindle Drill
GM-CMC-JFA manual, foot pedal operated drill with 2" drilling capacity. Auto-trip side guide for multi-hole patterns.
• 2" Drilling Capacity
• 13 Hollow Drill Bit Sizes
• Foot Pedal Operation
• Automatic Paper Chip Removal
> Learn More -
Challenge 3-Head Hydraulic Paper Drill
GM-CMC-EH_3C
Powerful 3-Head Hydraulic Operation drill with fast and easy adjustments.
- 2-1/2" Drilling Capacity
- Fast and Easy Head Adjustments
- Automatic Drill Return
- Auto-Trip Side Guide (optional) > Learn More -
Challenge Multiple Spindle Drill W/3-Heads
GM-CMC-MS_5Drilling of up to 5 holes (3 heads come standard) in a single stroke. Handle multiple hole patterns in a single stroke. 2½" drill capacity.
• Side Guide Adjustments
• Backgauge Adjustments
• Easy Drill Length Adjustment
• 2" Hollow Drill Bits Available in 13 sizes
• 2-1/2" Hollow Drill Bits Available in 4 sizes > Learn More -
Challenge Multi Spindle Drill
GM-CMC-MS_10AHigh production and heavy-duty drilling of up to 10 holes in a single stroke makes the MS-10 the ultimate drilling machine.
• Drills Up To 10 Holes in One Stroke
• Maximum Drill Bit Diameter 1/2"
• 2-1/2" Drilling Capacity
• Powerful Hydraulic Operation > Learn More -
KAMA ProFold 74
GM-PER-KAMAPRO_FOLD74The ProFold 74 folds and glues blanks into a multitude of print products automatically and cost-efficiently.
• In-house capabilities, shortens delivery time
• Short-set up via JobPlanner
• Wide range of applications
• Modular machine
• Dispensing adhesive tape
• Dispenser with pull strip
> Learn More -
Automatic 14" Laminator
GM-DRY-ALM3230Eliminate time-consuming, costly hand feeding and trimming in laminating with the new value priced ALM3230 lamination system!
• Small Foot Print – less than 4 sq. ft.
• 115 Volt, 15 amp service
• Ultra quick warm up < 5 minutes
• Sheets sizes: 13”x19”, 12”x18”, 11”x17”, 8.5”x11”
• Laminates copy paper up to 100lb
> Learn More -
Fujipla HLA-2301 Automatic Laminator
GM-DRY-HLA2301
The newest, commercial-grade Fujipla laminator by
Dry-Lam has everything you know and love about the
previous ALM line for automatic feeding, laminating,
trimming, and stacking sheets, but is now faster
and better with improved features and functionality!
Laminating up to 68” per minute, it is 25% faster than
the ALM3230.
• Ultra-quick warm-up time
• Automatic single or double-sided lamination
• Hands-free automatic feed tray > Learn More -
Challenge CMT-130TC Book Trimmer
GM-CMC-130TCThe ultimate book trimming solution necessary to be competitive, the Challenge CMT 130TC book trimmer is built from steel and cast-iron. The system can be configured as a hand-feed off-line trimmer for entry level cost-effective book finishing. Made in the USA.
• Powerful hydraulic cutting and clamping pressure
• Cuts up to 2” book
• 10.5” color touch screen display
• Easy to operate > Learn More -
Challenge CMT-330TC Book Trimmer
GM-CMC-330TCThe new Challenge CMT 330TC has expanded capability to finish cut LANDSCAPE FORMATTED BOOKS up to 12.1” tall by 12.9” wide and down to 5.875” tall by 3.937” wide. Made in the USA.
• Powerful hydraulic cutting and clamping pressure
• Cuts up to 2” book
• 10.5” color touch screen display
• Easy to operate
> Learn More -
Summa S1 Series D120 48" Drag Knife Vinyl Cutter
GM-SUM-S1D120
The S1 D120 is the ideal intermediate size for many cutting jobs. All S One models were designed from the base with the user in mind. They represent the ideal cutting solution for sign makers who want to automate and level up their cutting workflow. The S One series is your first choice where value and reliability are top of mind.
• Advanced cutting technology
• Legendary tracking performance
• Summa GoSign software > Learn More