Shop finishing equipment at Print & Finishing Solutions.
-
Challenge 3-Head Hydraulic Paper Drill
GM-CMC-EH_3C
Powerful 3-Head Hydraulic Operation drill with fast and easy adjustments.
- 2-1/2" Drilling Capacity
- Fast and Easy Head Adjustments
- Automatic Drill Return
- Auto-Trip Side Guide (optional) > Learn More -
Challenge Multiple Spindle Drill W/3-Heads
GM-CMC-MS_5
Drilling of up to 5 holes (3 heads come standard) in a single stroke. Handle multiple hole patterns in a single stroke. 2½" drill capacity.
• Side Guide Adjustments
• Backgauge Adjustments
• Easy Drill Length Adjustment
• 2" Hollow Drill Bits Available in 13 sizes
• 2-1/2" Hollow Drill Bits Available in 4 sizes > Learn More -
Challenge Multi Spindle Drill
GM-CMC-MS_10A
High production and heavy-duty drilling of up to 10 holes in a single stroke makes the MS-10 the ultimate drilling machine.
• Drills Up To 10 Holes in One Stroke
• Maximum Drill Bit Diameter 1/2"
• 2-1/2" Drilling Capacity
• Powerful Hydraulic Operation > Learn More -
Automatic 14" Laminator
GM-DRY-ALM3230
Eliminate time-consuming, costly hand feeding and trimming in laminating with the new value priced ALM3230 lamination system!
• Small Foot Print – less than 4 sq. ft.
• 115 Volt, 15 amp service
• Ultra quick warm up < 5 minutes
• Sheets sizes: 13”x19”, 12”x18”, 11”x17”, 8.5”x11”
• Laminates copy paper up to 100lb
> Learn More -
Fujipla HLA-2301 Automatic Laminator
GM-DRY-HLA2301
The newest, commercial-grade Fujipla laminator by
Dry-Lam has everything you know and love about the
previous ALM line for automatic feeding, laminating,
trimming, and stacking sheets, but is now faster
and better with improved features and functionality!
Laminating up to 68” per minute, it is 25% faster than
the ALM3230.
• Ultra-quick warm-up time
• Automatic single or double-sided lamination
• Hands-free automatic feed tray > Learn More -
GMP Q-Topic 380 Laminator
GM-AME-QTOPIC380
Introducing the all new QTopic-380 print on-demand single-sided lamination system. Sleeking option is pre-loaded and included. Spot coat gloss, matte, holographics and sleeking foils with this low cost laminator.
• Maximum sheet size capabilities up to 15”W x 48”L
• Pneumatic chrome lamination roller sets
• Adjustable de-curling system
• Rear burst roller ensures excellent results. > Learn More -
Matrix 370 Pneumatic Laminator
GM-VLT-MX370P
The Matrix MX-370P SRA3 Pneumatic single-sided laminating, digital foiling and special effects system. Create eye-catching finishes using foil and special effects with the pneumatic option, achievable with adjustable pressure rollers.
• Semi-automatic feed
• Pneumatic pressure
• Anti-curl technology
• Automatic separator
• Multifunctional - laminate, foil & create spot UV-style effects > Learn More -
Matrix 530 Duplex Pneumatic Laminator
GM-VLT-MX530DP
Winner of Quick Printing Readers’ Choice Top Products Awards, the Matrix Duplex is an incredibly cost-effective system that allows printers to laminate single-side, double-side and encapsulate their work, in-house.
• Semi-automatic feed
• Pneumatic pressure
• Multifunctional - laminate, foil & create spot UV-style effects > Learn More -
Matrix Omni-Flow 330 (SRA3) Deep Pile Feeder
GM-CWT-OMNI330The Matrix Omni-Flow Deep Pile Feeder is a modular system that is designed to be simple to install, configure and operate. The feeder can be retro-fitted to any Matrix Pneumatic or Matrix Duplex model.
• Retrofits all Matrix pneumatic and duplex models
• Quick and easy set-up and operation
• Fully automatic lamination and foiling
• Change between paper stocks in seconds > Learn More -
Challenge CMT-130TC Book Trimmer
GM-CMC-130TC
The ultimate book trimming solution necessary to be competitive, the Challenge CMT 130TC book trimmer is built from steel and cast-iron. The system can be configured as a hand-feed off-line trimmer for entry level cost-effective book finishing. Made in the USA.
• Powerful hydraulic cutting and clamping pressure
• Cuts up to 2” book
• 10.5” color touch screen display
• Easy to operate > Learn More -
Challenge CMT-330TC Book Trimmer
GM-CMC-330TC
The new Challenge CMT 330TC has expanded capability to finish cut LANDSCAPE FORMATTED BOOKS up to 12.1” tall by 12.9” wide and down to 5.875” tall by 3.937” wide. Made in the USA.
• Powerful hydraulic cutting and clamping pressure
• Cuts up to 2” book
• 10.5” color touch screen display
• Easy to operate
> Learn More -
Challenge Paddy Wagon Padding Press
GM-CMC-PAD_WAG
Turn your padding operation from messy inconvenience to a high-capacity profit center with simple 1-2-3 operation: (1) Tilt & Load (2) Clamp (3) Tilt & Pad
• Sample capacity 15,000 8-1/2 x 11” Sheets
• Portable
• Heavy-duty casters
• Welded tubular steel construction > Learn More
