The Onyx HD8000 Flat Bar Wire Closer has a wide range of capability and easy to use setting. It offers a a wide, open-ended 14 inch legal size capacity proficient to close books from 3/16 inch to 1-1/4 inch thick.

• 14" legal size capacity
• Closes books from 3/16 inch to 1-1/4 inch thick
• Significant savings on wire costs > Learn More

Operating at speeds up to 6000 sheets per hour, the “6000” makes fast and easy work of finishing needs.

• Feed sets unglued or glued side
• Accurate .010″ register
• 1 number per head per sheet > Learn More

The system will save binding service providers an average of 40% in process efficiency, dramatically reducing overall costs. Handling the widest range of media, the system delivers unparalleled flexibility and enables concurrent binding operations.

Eliminate 4 manual steps:
• Collation of covers, index tabs and inserts
• Punching of covers, index tabs or inserts
• Paper lift punching
• Separation of book stacks after punching

Other:
• No color slip-sheets by book/section required
• 7” Screen Display
• Punching Speed: Up to 10,800 sph
• Perfect for short-run, on-demand jobs
• Easy programmable job set-up > Learn More

The HD6500 is designed for the customer who may change dies less often. It offers quick, easy set-up: easy pin pulls and pre set stop positions. This Rhin-O-Tuff HD6500 Onyx Heavy Duty Punch is ideal for mid to high volume commercial and corporate use.

• 14” (356 mm) open ended extra capacity die
• Punch capacity: 40 sheets or 80 pages, 20 lb. bond paper
• Disengageable dies
• 3 year manufacturer warranty > Learn More

Designed from the best, heavy-duty metal, Rhin-O-Tuff Onyx HD4170 also known as Rhin-O-Roll, provides a fast coil insertion for all pitches and diameters. HD4170 is fully equipped with 12 inch dual powered rollers, with an adjustable lower roller suitable for high performance and more accurate coil insertion.

• Measures document thickness and coil sizing
• 12" binding width
• Stand-alone or attached to vertical OD/HD Series
• Designed for fast coil insertion
• 3 Year manufacturer warranty > Learn More

The HD7700 Ultima is the top of the line heavy duty durable Table Top Punch that has no equal. The patented Quick Change Die System has all of the features you have come to expect from Rhin-O-Tuff, making this a Performance Design Punch that will handle any size project, large or small.

• 14” (356 mm) open ended extra capacity die
• Punch capacity: 55 sheets or 110 pages, 20 lb. bond paper
• Automatic and Manual Reverse
• 3 year manufacturer warranty > Learn More

Upgrade your work productivity and Rhin-O-Tuff HD Punch with the ONYX APES-14. The Automatic Paper Ejector and Stacker (APES) module create a one smooth motion of punch, eject and stack operation. The APES-14 easily attaches to your HD7700, HD7000 or HD6500 and handles paper sizes from 5.5" X 5.5" up to 14" X 14" (140 X 140mm to 356 X 356mm).

• Ejects and stacks in one smooth operation
• Works with documents from 5.5" x 5.5" to 8.5" x 14"
• 3 Year Manufacturer Warranty > Learn More

The Rhin-O-Tuff ONYX series presents a premium electric open-ended table top punch that is convenient with a stylish look. Design from a heavy-duty metal fabrication, the HD7000 Onyx is constructed for long-lasting life. It has an impressive 14 inch open ended punch that can accommodate a variety of document sizes and features the patented “quick change” die system for changing punch patterns in 30 seconds.

• 14” (356 mm) open ended extra capacity die
• Punch capacity: 40 sheets or 80 pages, 20 lb. bond paper
• Diesengageable dies
• 3 year manufacturer warranty > Learn More

The PT 331SCC slits, cuts, creases or perfs in a single pass. Full or partial cross perforate up to 32 creases/perfs with registration mark cut compensation. Slitting formats are easily changeable without the need of replacing cartridges

• 150-350 gsm
• Interchangeable crease / perf dies
• Preset programs for quick job changeover
• Manual cut/crease input for customized jobs > Learn More

The new PT 335SCC Multi is a complete full-bleed finishing system to fit the digital marketplace. Equipped with interchangeable creasing/ perfing dies the PT 335SCC Multi can quickly switch over from perfing to creasing while preventing digital toner cracking. Strike perf capabilities means that the PT 335SCC Multi can now do partial perfs in both directions for “T” or “box” perfs.

• 4" deep pile feeder
• Multi Accessory Output
• 9" color touchscreen > Learn More

The corner rounder from Graphic Whizard rounds up to 600 sheets of paper. Utilizing seven available dies on a built-in rotary carousel, jobs are quick and easy. Comes with optional floor stand.

• 2 button operation or heavy duty foot pedal
• Built-in scrap drawer for easy waste removal
• Built-in die carousel with 7 different radius'
• Single die system with high grade cut stick bottom


> Learn More

Designed for the "on-demand" creation of folders, rounded business cards, greeting cards, self0adhesive labels, counter displays and customized boxes in any shape and style. The only one in the market with automatic plotters with Interchangeable Tools for prototyping and small production.

• Cutting speed: 40" per second
• Minimum sheet size: 8"x12"
• Maximum cutting area: 23.6" x 15.75"
• Feeder pile capacity: 7"
• Cutting, kiss-cutting, creasing and perforation
• Control Center Software provided with Sinajet

> Learn More