Shop finishing equipment at Print & Finishing Solutions.

The Horizon HT-110 is an automated three-knife trimmer for off-line or in-line operation with a user-friendly 10.4″ color touchscreen control console.

• Ease-of-use: simple and easy to operate
• Icon-based touchscreen
• High efficiency: speeds up to 1,600 cycles/hr
• 4,000 book/hr - stacks up to 3 books simultaneously > Learn More

The iCE StitchLiner Mark V Saddlestitcher from Standard Horizon was specially designed to run inline or near-line with high-speed, roll-fed digital presses. This automated saddlesticher produces high-quality booklets at speeds of up to 6,000 booklets/hour. Individual sheets are tightly folded along scoring lines for consistent quality, even with high page counts or variable page count applications. The Mark V also supports an optional cover feeder and can handle sheet sizes up 20” x 14” and produce a wide range of booklet sizes including A4 Landscape.

• Individual creasing and scoring
• Stable sheet transport
• Intelligent tracking > Learn More

The new Horizon HT-1000V Variable Three-Knife Trimmer operates in-line with Horizon perfect binders or off-line to deliver a wide range of input and output sizes for completely variable production.

• Heavy duty construction
• Consistent high quality finishing
• Hands free set up
• Variable production
> Learn More

The Horizon HT-80 is an in-line or off-line three-knife trimmer that produces precise, clean cuts with no rough edges.

• Cycle speed up to 1,000 books/hr
• Variable production
• Advanced automation
• Precision Trimming
> Learn More

The HT-300 Three-side Trimmer features a fully automated setup with color touchscreen control. The system offers higher productivity, unique corner cut capability, optional flap cover trimming, and it’s automated setup can be barcode driven.

• Over 35% faster than previous models
• Processes up to 300 books/stacks/hr
• 4 books/stack x 300 = 1,200 bph > Learn More

The ultimate book trimming solution necessary to be competitive, the Challenge CMT 130TC book trimmer is built from steel and cast-iron. The system can be configured as a hand-feed off-line trimmer for entry level cost-effective book finishing. Made in the USA.

• Powerful hydraulic cutting and clamping pressure
• Cuts up to 2” book
• 10.5” color touch screen display
• Easy to operate > Learn More

The new Challenge CMT 330TC has expanded capability to finish cut LANDSCAPE FORMATTED BOOKS up to 12.1” tall by 12.9” wide and down to 5.875” tall by 3.937” wide. Made in the USA.

• Powerful hydraulic cutting and clamping pressure
• Cuts up to 2” book
• 10.5” color touch screen display
• Easy to operate
> Learn More

The innovative Standard Horizon CABS 6000 perfect binding system is bringing new levels of automation to production bookbinding.

• in-line stacker for stand alone gathering
• Twin milling stations
• Automated in-line cover scoring
• Advanced quality control features

> Learn More

The Horizon SB-09 nine-clamp perfect binder features automated operation, push-button simplicity, and high-quality production perfect binding.

• 10.4" intelligent touch screen control
• Automatic air suction cover feeder
• Handles wide range of materials
• High efficiency
• Up to 4,000 books/hr
• In-line trimmer > Learn More