Shop finishing equipment at Print & Finishing Solutions.

• Shred Volume: 44 gal
• Dimensions (D x W x H): 23 1/4 x 25 1/4 x 38 1/4
• Sheet Capacity: 24-26
• Feed Opening: 16 Inch
• Electrical Requirements: 115 volts
• Horsepower: 1 3/4 > Learn More

• Shred Volume: 44 gal
• Dimensions (D x W x H): 23 1/4 x 25 1/4 x 38 1/4
• Sheet Capacity: 32-35
• Feed Opening: 16 Inch
• Electrical Requirements: 115 volts
• Horsepower: 1 3/4 > Learn More

• Strip Cut approved Level 2 security
• Can shred up to 52 sheets in a single pass
• Automatic start/stop controlled by photo cell
• ECC (Electronic Capacity Control) indicator helps prevent paper jams by indicating sheet capacity levels during the shredding process
• Automatic oil injection ensures optimal performance at all times
• Wide 12" feed opening enables heavier loads > Learn More

• Shred Volume: 44 gal
• Dimensions (D x W x H): 23 1/4 x 25 1/4 x 39 3/4
• Sheet Capacity: 37-39
• Feed Opening: 16 Inch
• Electrical Requirements: 115V and 20amp dedicated line
• Horsepower: 2 1/8 > Learn More

• Sheet Capacity: 50 - 52
• Shred Speed: 40 ft/min
• Category: Office / Department Shredder
• Feed Opening Size: 16"
• Cut Type & Size: Strip Cut, 1/4"
• Security Level: P - 2 > Learn More

This compact L’Sealer with Magnetic Hold down and power discharge conveyor with attached Tunnel is only 74 inches in total length. A great machine for low to medium production speeds of 8 to 12 packages per minute.

• Available in 110 volts or 220 volts
• Seal dimension 15 x 19”
• Tunnel dimension 20 x 16 x 6”
• Cycle speed 12 pkgs. per minute > Learn More

This fully adjustable combination L’Sealer with attached Shrink Tunnel includes the latest “Micro-Knife” Technology - No more seal wires to replace.

• Uni-body frame makes this unit easy to move around
• Seal dimension 16 x 22”
• Tunnel dimension 28 x 18 x 8”
• Cycle speed 15 pkgs. per minute" > Learn More

Two machines built on the same frame. This is Preferred Packaging's Best Seller with Automatic Product Adjustment.

• Combination fully automatic L’ Sealer and tunnel
• Easy load film cradle
• Fully enclosed safety doors
• Easy access control panel
• Self diagnosing Delta PLC
> Learn More

Two machines built on the same frame. This is Preferred Packaging's Best Seller with Automatic Product Adjustment.

• Combination fully automatic L’ Sealer and tunnel
• Easy load film cradle
• Fully enclosed safety doors
• Easy access control panel
• Self diagnosing Delta PLC
> Learn More

The Aerocut X Pro is the top-end slitter/cutter/creaser featuring state-of-the-art technologies. It is designed, built and calibrated with Japanese engineering and craftmanship at its best.

• 20% faster (34 sheets/min)
• Intuitive operation with 10" touch screen
• Creases 4,080 sheets/hr.
• Stacking capacity is 3.9"
• Lytrod Software included


> Learn More

The Aerocut X is the basic slitter/cutter/creaser. This is the refined model of the original AeroCut launched in 2010, featuring enhanced productivity and user-friendliness.

• Intuitive operation with 7" touch screen
• Flex mode allows for multiple size cards from one page
• Tri-suction feeding mechanism
• Robust slitters and guillotine to cut 400gsm stock
• Lytrod Intellicut software included
> Learn More

The Aerocut Velocity slitter/cutter/creaser features enhanced productivity and user- friendliness. Patented “Tri-Suction Feeding Mechanism” reduces risks of double feeds and mis-feeds. Creasing pressure can be adjusted in 5 levels instantly by shifting the lever.

• Sheet Capacity: 4” (vs. Classic Capacity: 2 ¼”)
• Speed: 20 sheets/min (vs. Classic Speed: 12 sheets)
• New Lytrod Intellicut software included
• Paper Size: 8. ¼” x 8. ¼” – 14½”x 47”+ (vs. Classic: 8 ¼” x 8 ¼” – 14 3/8” x 20 ½”+) > Learn More