Shop finishing equipment at Print & Finishing Solutions.

A new kind of booklet maker that can produce A4 landscape or large format 297mm x 297mm books. Includes a corner and edge stapling function as standard

• Produce square folded booklets from A6 to A4 Landscape, or large format 297 x 297mm
• Corner stapled documents in portrait A4
• Edge stapled documents in portrait and landscape A4
• Up to 200 page booklet capacity
• Supports up to 660mm long sheets without CST or 620mm with CST > Learn More

The all NEW Morgana BM5000 series is the latest member of the Plockmatic Group booklet making family. Engineered for mid-to-high volume customers with the highest quality and functionality requirements.

• Produces landscape and oversize sizes
• Handles 620mm/24.5" long sheets
• Finish 50 sheets, 2-up w/ 4 stitching heads
• Higher productivity and efficiency > Learn More

The new Horizon FoldLiner takes an innovative, hybrid approach, combining saddlestitching and folding to go from digital or offset press sheet to saddlestitched booklet in one efficient system.

• High productivity
• Accommodates press sheets up to 40″
• Up to 6,000 booklets/hr
• Wide range of booklet sizes
• Covers can also be merged from the tower.
• Mark sensor

> Learn More

The BM4000 is a versatile booklet maker designed to work with low to mid range volume digital production printers. It delivers exceptional quality and able to produce landscape booklets.

• Produce square folded booklets
• Corner stapled documents
• Up to 140 or 200 page book capacity
• Edge stapled documents in landscape or portrait


> Learn More

The Horizon iCE StitchLiner Mark IV Saddlestitcher is a high-speed, fully-automated booklet-making machine designed for commercial printing applications. The machine features advanced technology that ensures accurate stitching and folding of booklets at a rate of up to 6,000 booklets per hour. All processes, including signature scoring and folding, saddlestitching, and three-knife trimming are performed in one pass.The iCE StitchLiner Mark IV can handle a wide range of paper sizes including landscape and pocket-size booklets.

• Variable thickness production
• Production speed: 6,000 booklets/hr
• Up to 350 gsm
• iCE LINK ready > Learn More

The iCE StitchLiner Mark V Saddlestitcher from Standard Horizon was specially designed to run inline or near-line with high-speed, roll-fed digital presses. This automated saddlesticher produces high-quality booklets at speeds of up to 6,000 booklets/hour. Individual sheets are tightly folded along scoring lines for consistent quality, even with high page counts or variable page count applications. The Mark V also supports an optional cover feeder and can handle sheet sizes up 20” x 14” and produce a wide range of booklet sizes including A4 Landscape.

• Individual creasing and scoring
• Stable sheet transport
• Intelligent tracking > Learn More

The Challenge hydraulic powered Single Cornering Machine delivers up to ten times more cornering capacity than electric powered table-top models in the market.

• 6 Sizes of Cornering Blades
• Handles Any Size Sheet
• 4" Lift Capacity
• Precise Cutting Action
• Gravity Chip Disposal > Learn More

Proudly manufactured in Michigan, USA, the CHAMP 185 series delivers hydraulic powered strength and durability with easy to use controls to the 18” cutter market that is crowded with weaker electric motor powered machines. The CHAMP's strong ¼” thick cold rolled steel weldment frame offers a superior design allowing operators to cut today's hard stocks accurately in piles of up to 3.25” high.

• Adjustable angle 7.1” color touch screen controller
• Micro adjustment backgauge with hand knob
• Repeat and loop commands to simply program repetitive cut sequences
• Instant job generation from cuts history (cut-and-record) > Learn More

The Challenge Titan 200 meets the toughest safety standards in the industry. Equipped with light safety curtains, enclosed rear table, two-hand cut buttons and knife safety latch. UL and CE Certified. Made in the USA.

• Fully hydraulic cutting and clamping
• Solid cast iron and steel construction
• Bright red LED line light easy to see and needs no replacement
• Solid 1" thick tool grade aluminum table > Learn More

Titan 230 is built on a foundation of sold cast iron and steel. It meets the toughest safety standards in the industry today. UL and CE Certified. Made in the USA.

• 10.5" Color Touch Screen control panel
• Electronic Clamp Pressure control
• Repeat and Loop commands streamline program entry
• Auto-programming features of sheet division and label cutting with animated graphics
> Learn More

The Titan 265 is based on a solid cast iron and steel construction for maximum durability. Industry-exclusive UHMW gib surfaces, composite bushings, and a one-inch thick solid metal table require virtually zero maintenance for years of trouble-free operation.

• 10.5" Color Touch Screen control panel
• Programmable Clamp pressure per cut
• Low-pressure pre-clamping
• JDF and network capable hardware
> Learn More

The Challenge Champion 305 continues the company's well known excellence for innovation, reliability and durability. The industry workhorse for over thirty years. Powerful, accurate, hydraulic clamping and cutting with a 30 1/2" cut width and 4" clamp opening.

• Up to 26 cuts per minute
• Virtually maintenance-free design
• 30.5" / 77.5 cm cutting width, 4" / 10.2 cm clamp opening > Learn More