Shop finishing equipment at Print & Finishing Solutions.

A manual, foot pedal operated drill with 2" drilling capacity. Auto-trip side guide for multi-hole patterns.

• 2" Drilling Capacity
• 13 Hollow Drill Bit Sizes
• Foot Pedal Operation
• Automatic Paper Chip Removal
> Learn More

Powerful 3-Head Hydraulic Operation drill with fast and easy adjustments.

- 2-1/2" Drilling Capacity
- Fast and Easy Head Adjustments
- Automatic Drill Return
- Auto-Trip Side Guide (optional) > Learn More

Drilling of up to 5 holes (3 heads come standard) in a single stroke. Handle multiple hole patterns in a single stroke. 2½" drill capacity.

• Side Guide Adjustments
• Backgauge Adjustments
• Easy Drill Length Adjustment
• 2" Hollow Drill Bits Available in 13 sizes
• 2-1/2" Hollow Drill Bits Available in 4 sizes > Learn More

High production and heavy-duty drilling of up to 10 holes in a single stroke makes the MS-10 the ultimate drilling machine.

• Drills Up To 10 Holes in One Stroke
• Maximum Drill Bit Diameter 1/2"
• 2-1/2" Drilling Capacity
• Powerful Hydraulic Operation > Learn More

The ProFold 74 folds and glues blanks into a multitude of print products automatically and cost-efficiently.

• In-house capabilities, shortens delivery time
• Short-set up via JobPlanner
• Wide range of applications
• Modular machine
• Dispensing adhesive tape
• Dispenser with pull strip
> Learn More

The Tamerica TCC-1655 HC is a comprehensive hot & cold roll laminator that caters to a variety of laminating requirements. It efficiently laminates materials ranging from 1.5 to 10 mil thickness at a rate of up to 10 feet per minute and can manage items as wide as 65 inches.

• Take up bar for cold lamination
• 1”. 2.25” and 3” Core Size
• Run / Stop switch w/ reverse function > Learn More

The Tamerica TCC-1200HC is a versatile hot & cold roll laminator that accommodates a range of laminating needs. It can laminate materials from 1.5 to 10 mil thick at a speed of 8.8 feet per minute and can handle items up to 45 inches wide.

• 45” Laminating Width
• Mounts up to 1/2”
• Take up bar for cold lamination > Learn More

The ultimate book trimming solution necessary to be competitive, the Challenge CMT 130TC book trimmer is built from steel and cast-iron. The system can be configured as a hand-feed off-line trimmer for entry level cost-effective book finishing. Made in the USA.

• Powerful hydraulic cutting and clamping pressure
• Cuts up to 2” book
• 10.5” color touch screen display
• Easy to operate > Learn More

The new Challenge CMT 330TC has expanded capability to finish cut LANDSCAPE FORMATTED BOOKS up to 12.1” tall by 12.9” wide and down to 5.875” tall by 3.937” wide. Made in the USA.

• Powerful hydraulic cutting and clamping pressure
• Cuts up to 2” book
• 10.5” color touch screen display
• Easy to operate
> Learn More

Turn your padding operation from messy inconvenience to a high-capacity profit center with simple 1-2-3 operation: (1) Tilt & Load (2) Clamp (3) Tilt & Pad

• Sample capacity 15,000 8-1/2 x 11” Sheets
• Portable
• Heavy-duty casters
• Welded tubular steel construction > Learn More

Heavy duty construction with side handles. Holds up to 11" x 17" (28 x 43 cm) Stock.

• 500 lb (227 kg) Total Capacity
• 12 Shelves - 4 Fixed / 8 Adjustable
• Portable - Heavy-duty Industrial Casters
• Also available in XL

> Learn More

The Challenge HANDY PADDER design provides a portable and compact table top padding device for the right price.

• Easy 1-2-3 Operation
• Large capacity
• Self-aligning gravity load
• Table-top design

> Learn More