Shop finishing equipment at Print & Finishing Solutions.

The Preferred Pack CT-55 light duty carton sealer is simple to use. The operator simply folds the top flaps of the corrugated carton and feeds it into the machine. The CT-55 applies a 2 inch tape strip to both the top and bottom of the carton simultaneously. This two belt drive design is a heavy duty versatile machine designed for dependable performance and easy operation. The CT-55 can be easily adjusted in only seconds to process a different size carton. Excellent for low profile, small, lightweight boxes.

• Interchangeable Tape Heads
• Top and Bottom Pressure Rollers to Close Box Top
• 2 Top and Bottom Drive Belts - Positive Feed
• Heavy Duty Locking Casters
• Fully Adjustable Legs > Learn More

The CT-55-26 applies a 2 inch tape strip to both the top and bottom of the carton simultaneously. This two belt drive design is a heavy duty versatile machine designed for dependable performance and easy operation. The CT-55-26 can be easily adjusted in only seconds to process a different size carton. Excellent for low profile, small, lightweight boxes.

• Interchangeable Tape Heads
• Top and Bottom Pressure Rollers to Close Box Top
• 2 Top and Bottom Drive Belts - Positive Feed
• Heavy Duty Locking Casters
• Fully Adjustable Legs > Learn More

The Preferred Pack CT-55-26 light duty carton sealer is simple to use. The CT-55-26 applies a 2 inch tape strip to both the top and bottom of the carton simultaneously. This two belt drive design is a heavy duty versatile machine designed for dependable performance and easy operation. The CT-55-26 can be easily adjusted in only seconds to process a different size carton. Excellent for low profile, small, lightweight boxes.

• Interchangeable Tape Heads
• Top and Bottom Pressure Rollers to Close Box Top
• 2 Top and Bottom Drive Belts - Positive Feed
• Heavy Duty Locking Casters
• Fully Adjustable Legs
• Bottom Drive belts only > Learn More

Fully automated power driven side belts. Operation flexibility with regular and memory modes. Suitable for many different box sizes and designed for heavy loads, up to 50kg (110lb). Robust design, Easy to operate, Easy maintenance.

• Operation flexibility with regular and memory modes
• Suitable for many different box sizes
• Designed for heavy loads, up to 50kg (110lb).
• Robust design, Easy to operate, Easy maintenance
• Made in Taiwan, Quality assurance
• Both side compression rollers > Learn More

The operator simply opens up and squares a flat box, loads it into the pack station, uses the kick plate to fold minor flap and activate the bottom flap folder. The operator then presses the green switch and 2 of the bottom flaps are opened allowing for the next box to be fed into the machine. The operator then fills the box, and when once filled, the operator closes the minor and major flaps and pushes the box into the carton sealer.

• Saves time and labor costs to close bottom flaps before loading
• Folding size: L 250-500mm (10-20”)
• Folding size: W 200-400mm (8-16”)
• Folding size: H 100-500 mm (4-20”)
• Air: 1 CFM at 60 PSI
• Box Height:4 to 19.6 max Inch


> Learn More

The Challenge hydraulic powered Single Cornering Machine delivers up to ten times more cornering capacity than electric powered table-top models in the market.

• 6 Sizes of Cornering Blades
• Handles Any Size Sheet
• 4" Lift Capacity
• Precise Cutting Action
• Gravity Chip Disposal > Learn More

Proudly manufactured in Michigan, USA, the CHAMP 185 series delivers hydraulic powered strength and durability with easy to use controls to the 18” cutter market that is crowded with weaker electric motor powered machines. The CHAMP's strong ¼” thick cold rolled steel weldment frame offers a superior design allowing operators to cut today's hard stocks accurately in piles of up to 3.25” high.

• Adjustable angle 7.1” color touch screen controller
• Micro adjustment backgauge with hand knob
• Repeat and loop commands to simply program repetitive cut sequences
• Instant job generation from cuts history (cut-and-record) > Learn More

The Challenge Titan 200 meets the toughest safety standards in the industry. Equipped with light safety curtains, enclosed rear table, two-hand cut buttons and knife safety latch. UL and CE Certified. Made in the USA.

• Fully hydraulic cutting and clamping
• Solid cast iron and steel construction
• Bright red LED line light easy to see and needs no replacement
• Solid 1" thick tool grade aluminum table > Learn More

Titan 230 is built on a foundation of sold cast iron and steel. It meets the toughest safety standards in the industry today. UL and CE Certified. Made in the USA.

• 10.5" Color Touch Screen control panel
• Electronic Clamp Pressure control
• Repeat and Loop commands streamline program entry
• Auto-programming features of sheet division and label cutting with animated graphics
> Learn More

The Titan 265 is based on a solid cast iron and steel construction for maximum durability. Industry-exclusive UHMW gib surfaces, composite bushings, and a one-inch thick solid metal table require virtually zero maintenance for years of trouble-free operation.

• 10.5" Color Touch Screen control panel
• Programmable Clamp pressure per cut
• Low-pressure pre-clamping
• JDF and network capable hardware
> Learn More

The Challenge Champion 305 continues the company's well known excellence for innovation, reliability and durability. The industry workhorse for over thirty years. Powerful, accurate, hydraulic clamping and cutting with a 30 1/2" cut width and 4" clamp opening.

• Up to 26 cuts per minute
• Virtually maintenance-free design
• 30.5" / 77.5 cm cutting width, 4" / 10.2 cm clamp opening > Learn More

The Challenge Champion 370 continues the company's well known excellence for innovation, reliability and durability. The industry workhorse for over thirty years. Powerful, accurate, hydraulic clamping and cutting with a 37" cut width and 5 1/8" clamp opening.

• Up to 24 cuts per minute
• Virtually maintenance-free design
• 37" cutting width, 5 1/8" clamp opening
• Hydraulic clamping & cutting > Learn More