- Home /
Categories:
Filter Results
- Manufacturer
- Sub Categories
-
Challenge 370TC Paper Cutter
GM-CMC-370TC
The Challenge Champion 370 continues the company's well known excellence for innovation, reliability and durability. The industry workhorse for over thirty years. Powerful, accurate, hydraulic clamping and cutting with a 37" cut width and 5 1/8" clamp opening.
• Up to 24 cuts per minute
• Virtually maintenance-free design
• 37" cutting width, 5 1/8" clamp opening
• Hydraulic clamping & cutting > Learn More -
Challenge iCutter 1370
GM-CMC-ICUT1370
Challenege's Heavy Duty Paper Cutters, the iCutter Series, provides precise, trouble-free operation at an incredible value. With backgauge precision, and advanced controlling system, it is construed out of cast iron and steel frame.
• Manual/semi-automatic and automatic operating modes
• AC servomotor, ball screw and linear guide
• Adjustable clamping pressure
• Table light/optical cut line indicator > Learn More -
Challenge CMT-330TC Book Trimmer
GM-CMC-330TC
The new Challenge CMT 330TC has expanded capability to finish cut LANDSCAPE FORMATTED BOOKS up to 12.1” tall by 12.9” wide and down to 5.875” tall by 3.937” wide. Made in the USA.
• Powerful hydraulic cutting and clamping pressure
• Cuts up to 2” book
• 10.5” color touch screen display
• Easy to operate
> Learn More -
Challenge Titan 265TC Paper Cutter
GM-CMC-TITAN265TCThe Titan 265 is based on a solid cast iron and steel construction for maximum durability. Industry-exclusive UHMW gib surfaces, composite bushings, and a one-inch thick solid metal table require virtually zero maintenance for years of trouble-free operation.
• 10.5" Color Touch Screen control panel
• Programmable Clamp pressure per cut
• Low-pressure pre-clamping
• JDF and network capable hardware
> Learn More -
Challenge iCutter 780
GM-CMC-ICUT780
Challenege's Heavy Duty Paper Cutters, the iCutter Series, provides precise, trouble-free operation at an incredible value. With backgauge precision, and advanced controlling system, it is construed out of cast iron and steel frame.
• Manual/semi-automatic and automatic operating modes
• AC servomotor, ball screw and linear guide
• Adjustable clamping pressure
• Table light/optical cut line indicator > Learn More -
Challenge Titan 200TC Cutter
GM-CMC-TITAN200TC
The Challenge Titan 200 meets the toughest safety standards in the industry. Equipped with light safety curtains, enclosed rear table, two-hand cut buttons and knife safety latch. UL and CE Certified. Made in the USA.
• Fully hydraulic cutting and clamping
• Solid cast iron and steel construction
• Bright red LED line light easy to see and needs no replacement
• Solid 1" thick tool grade aluminum table > Learn More -
Challenge CMT-130TC Book Trimmer
GM-CMC-130TC
The ultimate book trimming solution necessary to be competitive, the Challenge CMT 130TC book trimmer is built from steel and cast-iron. The system can be configured as a hand-feed off-line trimmer for entry level cost-effective book finishing. Made in the USA.
• Powerful hydraulic cutting and clamping pressure
• Cuts up to 2” book
• 10.5” color touch screen display
• Easy to operate > Learn More -
Challenge iCutter 1160
GM-CMC-ICUT1160
Challenge's Heavy Duty Paper Cutters, the iCutter Series, provides precise, trouble-free operation at an incredible value. With backgauge precision, and advanced controlling system, it is construed out of cast iron and steel frame.
• Manual/semi-automatic and automatic operating modes
• AC servomotor, ball screw and linear guide
• Adjustable clamping pressure
• Table light/optical cut line indicator > Learn More
![](/assets/images/defaults/ajax-loader.gif)