Print & Finishing Solutions supplies finishing equipment sized to the printed sheet, substrate, run length, bind style, and throughput target. Compare completed jobs per shift rather than rated machine speed alone; feeding, setup, changeovers, trimming, and material handling usually set the actual pace. A well-matched system cuts manual touches without damaging toner or coatings or compromising registration and fold quality. Print & Finishing Solutions also provides installation, operator training, parts, consumables, and field service across the Western U.S.
Finishing Equipment for Commercial Print and In-Plant Production
-
Challenge Handy Padder
GM-CMC-HANDYPADDER
The Challenge HANDY PADDER design provides a portable and compact table top padding device for the right price.
• Easy 1-2-3 Operation
• Large capacity
• Self-aligning gravity load
• Table-top design
> Learn More -
Horizon CRF-362 Creaser Folder
GM-HOR-CRF362
The new Horizon CRF-362 Creaser/Folder has been designed to handle the unique requirements, creasing and folding can be done in one pass.
• Up to 200 jobs stored in memory for easy recall
• Paper weights up to 400 gsm
• Sheet sizes up to 14.33” x 34”
• Up to 5000 sheets/hr-one crease and fold > Learn More -
Challenge PakRak XL
GM-CMC-PAK_RAK_XL
The Pak-Rak XL an invaluable cart for the high volume printer. Place near printer for stacking, organizing, storing for pre- and post- print production.
• Holds 14"x20" stock
• 12 shelf surfaces.
• Optional: 4 additional shelves
• 500lbs total capacity
> Learn More -
Challenge Handy Cart
GM-CMC-HANDYCART
Incredibly helpful for the busy print shop. Shipped in one piece, the Handy Cart is constructed of heavy gauge, welded steel. Made in the USA.
• Holds 4 piles of 11"x17" stock up to 21" tall
• 500lbs Total Capacity
• Portable- Four 5" swivel casters for easy rolling
• Full size lower shelf with lip > Learn More -
Challenge iJOG Air
GM-CMC-IJOG_AIR
The Challenge iJOG air-flow heavy duty jogger has the power and air assistance to quickly jog up to a 4" lift of stock. With a 12"x18" maximum sheet size, the operator no longer has to add a small lift to achieve a neat block of sheets.
• Pedal controlled
• Robust, electro-mechanical jogging action
• Front side loading
• Adjustable air flow - dial from 0 to 112 CFM
> Learn More -
Multi Automatic Creaser
GM-GWH-PT335B
• Speed: 4500 SPH (Based on 8.5" x 11"run landscape, 1 crease)
• Maximum stock size: 13" x 25.5"
• Max # Crease Positions: 32
• Feeder: 4" Airfed vacuum pile feeder > Learn More -
Challenge Handy Jog
GM-CMC-HANDYJOG
The Challenge Handy Jog is a low cost, highly effective jogger. With a small footprint, the Handy Jog can be placed beside any machine. Optional foot switch. Made in the USA.
• Front side loading
• Powerful jogging action
• Quiet operation
• 2 sizes: Standard (8.5"x11") and Large (11" x 17")
> Learn More -
Horizon SPF-2000 Bookletmaker
GM-HOR-SPF2000
The SPF-2000 Bookletmaker is a fully automated all-in-one bookletmaking system that can perform changeovers 50% faster compared to previous SPF models. With production rates of up to 4,700 cycles per hour, the SPF-2000 can be configured for both digital and offset workflows and managed through Horizon’s iCE LiNK Bindery Control System.
• All-in-one: The SPF-2000 can fold, stitch, hole punch, and trim booklets in one compact system.
• Quality-enhancing features: With the addition of separate air and jogging functions at the stitching section, a press roller at the folding section, and a jogging function at the fore-edge trimming section, operators can produce high-quality booklets with even more consistency.
• Touchscreen control panel: A new 15” touchscreen control panel allows operators of any skill level to easily set up new jobs, select jobs from pre-saved templates, and make fine adjustments on the fly.
> Learn More -
Programmable 408A Tabletop Folder
GM-MBM-408A
Dependable automatic folder that comes pre-programmed with 18 standard folds. Up to 12 custom jobs can be stored in memory.
• Features automatic folding position setting
• Folding patterns can be stored and recalled via touch screen
• Fastest folding speed in its class > Learn More -
Baumfolder, 714XLT w/Cart
GM-BAU-714XLT
The Baumfolder Ultrafold 714XLT air feed tabletop folder combines all the rugged reliability of the larger models in a compact, convenient size. It can easily handle coated stocks as well as high-speed copier and laser-printed stocks.
• Non-marking, continuous feeding with bottom feed system
• Toner resistant and static dissipative folding rollers
• Gear-driven folding rollers, no slippage during folding > Learn More -
Challenge Handy Jog-Large
GM-CMC-HANDYJOG_LT
The Challenge Handy Jog is a low cost, highly effective jogger. With a small footprint, the Handy Jog can be placed beside any machine. Optional foot switch. Made in the USA.
• Front side loading
• Powerful jogging action
• Quiet operation
• 2 sizes: Standard (8.5"x11") and Large (11" x 17") > Learn More -
Morgana PowerSquare 224VF
GM-MSY-PSQ224FR
The NEW PowerSquare™ 224VF with its high capacity dual bin feeder offers a flexible solution for a wide range of booklet types and sizes.
• Makes books from 4 – 224 pages
• Fast and cost-effective
• Produces high quality SquareBack™ Books
• Inserts 1-6 stitches
• Small footprint > Learn More
