Finishing Equipment for Commercial Print and In-Plant Production

The BQ500 is designed to increase book-of-one productivity, increase automation, and quality control over a wider range of substrates.

• Supports both EVA and PUR
• Produce high speed and high quality books without a skilled operator
• Up to 1,350 cycles per hour
• 12.1" user friendly touch screen > Learn More

The Horizon RD-4055 Rotary Die Cutter is designed to meet the growing demand for short-run die-cut product with its ability to die-cut, crease, perforate, slit, hole punch, and round corner in one process for digital and offset printed sheets.

• Easy to use touch screen
• Double-feed detection
• Simultaneous cuts
• Eliminate image cracking
• Reduce costs > Learn More

The Wob3000 is the logical companion to the AlphaDoc® and DocuPunch® punching machines. It can bind documents with maximum punched edge of 350mm and up to 28mm thick with a true output of up to 800 documents / hour.

• Versatile
• Efficient
• User friendly
• Ergonomic design > Learn More

The 352S Air Feed Paper Folder is a high-speed, manual paper folding solution for high-volume digital production. Featuring an air suction system, it efficiently handles coated stocks with ease.

• Sheet Capacity: 450
• Paper Size: 3 3/8″ x 4 3/4″ to 12 5/8″ x 17 3/4″
• Paper Weight: 13 to 110 lbs.
• Speed: 30,000 per/hr. > Learn More

Dependable semi-automatic tabletop cutter with electric blade drive, manual fast-action clamp, and EASY CUT blade activation.

• Front table digital display (cm or inches) for precise back gauge positioning
• Patented lever-activated, fast-action clamp
• Precision side guide > Learn More

The Aerocut Prime is an ideal solution for finishing, especially for short-run digitally printed applications, such as business cards, post cards, invitations, greeting cards, leaflets, tickets and more. It features 2 single blade slitters to trim top & bottom margins, and 2 double blade slitters for center gutters and precise accuracy. The durable blades cut stocks up to 400 gsm.

• Sheet Capacity: 4”
• Paper Size: 8.27” x 8.27” – 14.5” x 47”+
• Speed: 24 sheets/min
• New Lytrod Intellicut software included
• 15,120 business cards/hr / 6,720 post cards/hr / 1,260 folding leaflet/hr > Learn More

The Micron MC-20 Single Cylinder Pneumatic Fastener Attaching Machine is an affordable, adaptable device with replaceable dies for all fastener installations, including grommets/eyelets up to size #5 (5/8" ID), rivets, jean buttons, and snaps.

• This machine can accommodate dies for snaps, rivets and buttons
• Features a laser pointer, optional foot pedal and comes standard with safety system
• Optional hand and foot pedal operations > Learn More

The new SSC 250A is a revolutionary vertical cutter offering a maximum crosscut of 98″.

• Two Upper Frame Quickstops
• Integral Counter Weight
• Integrated Laser Sight Line > Learn More

• Start and stop is automatically controlled by photo sensor
• The 2503's high quality, hardened steel cutting shafts take staples, paper clips, and credit cards
• Dimensions (DxWxH): 14 3/4 x 19 3/4 x 34 1/4
• Sheet Capacity: 12-14
• Feed Opening: 10 1/4 Inch
• Electrical Requirements: 115 volts
• Horsepower: 3/4 > Learn More

A manual, foot pedal operated drill with 2" drilling capacity. Auto-trip side guide for multi-hole patterns.

• 2" Drilling Capacity
• 13 Hollow Drill Bit Sizes
• Foot Pedal Operation
• Automatic Paper Chip Removal
> Learn More

The Challenge hydraulic powered Single Cornering Machine delivers up to ten times more cornering capacity than electric powered table-top models in the market.

• 6 Sizes of Cornering Blades
• Handles Any Size Sheet
• 4" Lift Capacity
• Precise Cutting Action
• Gravity Chip Disposal > Learn More

A robust model with built in electric lift operation (ELO), 4.5" roller height, wide side pocets for flex face material, side measurements and knife grove for cutting.

• Table Size 5'5" x 10'9" > Learn More