Print & Finishing Solutions supplies finishing equipment sized to the printed sheet, substrate, run length, bind style, and throughput target. Compare completed jobs per shift rather than rated machine speed alone; feeding, setup, changeovers, trimming, and material handling usually set the actual pace. A well-matched system cuts manual touches without damaging toner or coatings or compromising registration and fold quality. Print & Finishing Solutions also provides installation, operator training, parts, consumables, and field service across the Western U.S.
Finishing Equipment for Commercial Print and In-Plant Production
-
Micron MC-20 1-Cylinder Fastening Attaching Machine
GM-MSC-MC20_1
The Micron MC-20 Single Cylinder Pneumatic Fastener Attaching Machine is an affordable, adaptable device with replaceable dies for all fastener installations, including grommets/eyelets up to size #5 (5/8" ID), rivets, jean buttons, and snaps.
• This machine can accommodate dies for snaps, rivets and buttons
• Features a laser pointer, optional foot pedal and comes standard with safety system
• Optional hand and foot pedal operations > Learn MoreUS$1,950.00 -
Substrate 210A 82" Cutter
GM-MSC-SSC210AFeaturing a maximum crosscut of 82″ the 210A is a must have for sign making shops. Photos are shown shown with an optional stand.
• Single blade cartridge cutting up to 20mm/.75in
• Three blade utility cartridge cutting up to 13mm/.5in
• ACM Cutting Wheel cartridge > Learn More -
5300 Combo Fully Automated L'Sealer & Tunnel
GM-PPS-5300COMBO
Two machines built on the same frame. This is Preferred Packaging's Best Seller with Automatic Product Adjustment.
• Combination fully automatic L’ Sealer and tunnel
• Easy load film cradle
• Fully enclosed safety doors
• Easy access control panel
• Self diagnosing Delta PLC
> Learn More -
Tamerica TCC-1200 HC 45" Hot & Cold Laminator
GM-TPI-TCC1200HC
The Tamerica TCC-1200HC is a versatile hot & cold roll laminator that accommodates a range of laminating needs. It can laminate materials from 1.5 to 10 mil thick at a speed of 8.8 feet per minute and can handle items up to 45 inches wide.
• 45” Laminating Width
• Mounts up to 1/2”
• Take up bar for cold lamination > Learn More -
Mimaki CG 60AR Roll Cutting Unit
PM-MIM-CG_60AR
Perfect for any customer, these precision cutting devices offer repeatable fast cutting on a wide range of media. Perfect for t-shirt transfers, decals, window lettering, cardstock projects and more.
• Available in 29” and 61”
• Continuous crop mark detection
• Three selectable job speeds
• FineCut9 and SimplePop software included > Learn More -
DestroyIt Cross-Cut Shredder 3/16"
SM-MBM-2465SC• Automatic Reverse and Power Cut-Off
• Automatic Stop if Shred Bin is Full
• SPS (Safety Protection System)
• Solid Steel Cutting Shafts
• Easy-Switch
• Patented Safety Flap > Learn MoreUS$909.00 -
Akiles ProLam R27 Heavy Duty 27" Roll Laminator
GM-AKI-APLR27The ALL NEW Akiles ProLam R27 roll laminator is the perfect heavy duty laminator for your school or business. Its table top design allows you to laminate material up to 27″ wide, while having the power to laminate a full range of 1.5 to 10 mil lamination film.
• Warm Up Time: 20 min
• Laminating Speed: 9 settings (Up to 3.6 ft/min)
• Max Film Thickness: 10 mil
• Max Film Width: 27" > Learn MoreUS$2,599.00 -
Challenge Multi Spindle Drill
GM-CMC-MS_10A
High production and heavy-duty drilling of up to 10 holes in a single stroke makes the MS-10 the ultimate drilling machine.
• Drills Up To 10 Holes in One Stroke
• Maximum Drill Bit Diameter 1/2"
• 2-1/2" Drilling Capacity
• Powerful Hydraulic Operation > Learn More -
Fujipla HLA-2301 Automatic Laminator
GM-DRY-HLA2301
The newest, commercial-grade Fujipla laminator by Dry-Lam has everything you know and love about the previous ALM line for automatic feeding, laminating, trimming, and stacking sheets, but is now faster and better with improved features and functionality! Laminating up to 68” per minute, it is 25% faster than the ALM3230.
• Ultra-quick warm-up time
• Automatic single or double-sided lamination
• Hands-free automatic feed tray > Learn More -
Formax ColorMax 8 Digital Color Printer
GM-FOR-COLORMAX8
The ColorMax8 Digital Color Printer combines the latest in inkjet technology with the capacity to produce full bleed, full-color mailing and packaging solutions.
• Intuitive 7" color touchscreen
• Full CMYK color
• Full bleed up to 8.5" wide
• Prints on a wide range of media
• High-capacity ink tanks > Learn More -
GFP 300 Series 55" Top Heat Laminator
GM-GFP-355TH
The Gfp 300 series delivers rugged construction, labor-saving features, and high quality output in an entry level machine.
• Labor saving quick-grip film shafts
• Integrated rear rewind for roll-to-roll apps
• Swing-up feed table and 38" output height > Learn More -
Corner Rounder CR607
GM-GWH-PTCR607
The corner rounder from Graphic Whizard rounds up to 600 sheets of paper. Utilizing seven available dies on a built-in rotary carousel, jobs are quick and easy. Comes with optional floor stand.
• 2 button operation or heavy duty foot pedal
• Built-in scrap drawer for easy waste removal
• Built-in die carousel with 7 different radius'
• Single die system with high grade cut stick bottom
> Learn More
