Shop finishing equipment at Print & Finishing Solutions.

Eliminate time-consuming, costly hand feeding and trimming in laminating with the new value priced ALM3230 lamination system!

• Small Foot Print – less than 4 sq. ft.
• 115 Volt, 15 amp service
• Ultra quick warm up < 5 minutes
• Sheets sizes: 13”x19”, 12”x18”, 11”x17”, 8.5”x11”
• Laminates copy paper up to 100lb

> Learn More

For jogging of sheets (either left or right) with a pneumatically driven air removal roller with clamping device, lift stabilizer, and lift pusher. Designed for the most difficult stocks.

• Maximum size: 31 7/16" x 44 7/8"
• Variable pressure air removal roller
• Variable speed air removal roller
• Variable jogging intensity > Learn More

The Baumfolder Ultrafold 714XLT air feed tabletop folder combines all the rugged reliability of the larger models in a compact, convenient size. It can easily handle coated stocks as well as high-speed copier and laser-printed stocks.

• Non-marking, continuous feeding with bottom feed system
• Toner resistant and static dissipative folding rollers
• Gear-driven folding rollers, no slippage during folding > Learn More

The Horizon BQ-480 Perfect Binder features the quickest set-up and changeover for variable book production in its class, especially for book-of-one. Interchangeable PUR and EVA glue tanks.

• Book Block Size from 5.71” x 4.14” – 12.59” x 12.59”
• Book Thickness: 0.04” to 2.56”
• Book of One Production-Max. 800 book/hr
• Cover Weight Range: Up to 348.9gsm
• Cycle Speed: 1,350 cycles/hr > Learn More

The Horizon BQ-480 Perfect Binder features the quickest set-up and changeover for variable book production in its class, especially for book-of-one. Interchangeable PUR and EVA glue tanks.

• Book Block Size: 5.71” x 4.14” – 12.59” x 12.59”
• Book Thickness: 0.04” to 2.56”
• Book of One Production-Max. 800 book/hr
• Cover Weight Range: Up to 348.9gsm
• Cycle Speed: 1,350 cycles/hr > Learn More

Powerful 3-Head Hydraulic Operation drill with fast and easy adjustments.

- 2-1/2" Drilling Capacity
- Fast and Easy Head Adjustments
- Automatic Drill Return
- Auto-Trip Side Guide (optional) > Learn More

The Challenge Champion 305 continues the company's well known excellence for innovation, reliability and durability. The industry workhorse for over thirty years. Powerful, accurate, hydraulic clamping and cutting with a 30 1/2" cut width and 4" clamp opening.

• Up to 26 cuts per minute
• Virtually maintenance-free design
• 30.5" / 77.5 cm cutting width, 4" / 10.2 cm clamp opening > Learn More

The Challenge Champion 370 continues the company's well known excellence for innovation, reliability and durability. The industry workhorse for over thirty years. Powerful, accurate, hydraulic clamping and cutting with a 37" cut width and 5 1/8" clamp opening.

• Up to 24 cuts per minute
• Virtually maintenance-free design
• 37" cutting width, 5 1/8" clamp opening
• Hydraulic clamping & cutting > Learn More

Proudly manufactured in Michigan, USA, the CHAMP 185 series delivers hydraulic powered strength and durability with easy to use controls to the 18” cutter market that is crowded with weaker electric motor powered machines. The CHAMP's strong ¼” thick cold rolled steel weldment frame offers a superior design allowing operators to cut today's hard stocks accurately in piles of up to 3.25” high.

• Adjustable angle 7.1” color touch screen controller
• Micro adjustment backgauge with hand knob
• Repeat and loop commands to simply program repetitive cut sequences
• Instant job generation from cuts history (cut-and-record) > Learn More

The ultimate book trimming solution necessary to be competitive, the Challenge CMT 130TC book trimmer is built from steel and cast-iron. The system can be configured as a hand-feed off-line trimmer for entry level cost-effective book finishing. Made in the USA.

• Powerful hydraulic cutting and clamping pressure
• Cuts up to 2” book
• 10.5” color touch screen display
• Easy to operate > Learn More

The new Challenge CMT 330TC has expanded capability to finish cut LANDSCAPE FORMATTED BOOKS up to 12.1” tall by 12.9” wide and down to 5.875” tall by 3.937” wide. Made in the USA.

• Powerful hydraulic cutting and clamping pressure
• Cuts up to 2” book
• 10.5” color touch screen display
• Easy to operate
> Learn More

The Challenge hydraulic powered Single Cornering Machine delivers up to ten times more cornering capacity than electric powered table-top models in the market.

• 6 Sizes of Cornering Blades
• Handles Any Size Sheet
• 4" Lift Capacity
• Precise Cutting Action
• Gravity Chip Disposal > Learn More