FAQs
Which slitter-cutter-creaser is right for a high-mix digital print shop?
Look for stored jobs, cut-mark registration, quick changeovers, and support for your widest sheet. The AeroCut X and X Pro suit frequent short runs, varied layouts, and stocks up to 400 gsm.
How much production speed do we actually need?
Measure speed across the full job, including loading, setup, waste removal, and delivery handling. A rating of 20 to 34 sheets per minute can handle substantial short-run volume, though feeder capacity and changeover time often set the actual daily throughput.
Can one machine finish business cards, postcards, brochures, and tickets?
Yes, if the machine supports programmable slitting, cross cutting, creasing, and the required finished size. Flex-layout controls help with gang-run sheets containing different piece sizes. Perforation may be standard, optional, or tied to an interchangeable die.
What prevents registration errors on digitally printed sheets?
Cut-mark reading, image-shift compensation, skew adjustment, and side alignment correct common variation between the press and finisher. These controls matter on tight bleeds, narrow gutters, and multi-up cards, where a small image shift produces an obvious trim error.
Will a slitter-cutter-creaser handle coated cover stock without toner cracking?
Choose a machine rated for the stock weight, then test its creasing method on your printed samples. Matrix or adjustable-depth creasing compresses the sheet before folding, which reduces cracking across heavy toner coverage and coated stocks.
When do we need strike perforation instead of standard perforation?
Strike perforation is needed for partial perfs such as tear-off sections, reply cards, box patterns, and T-perfs. The PT335 SCC Multi handles partial perforation in both sheet directions with interchangeable perforating dies.
Should we test our own press sheets before selecting a machine?
Yes. Test the heaviest stock, longest sheet, densest toner coverage, smallest finished piece, and toughest perforation pattern. Print & Finishing Solutions can run those samples to check feeding, registration, crease quality, and finished output.
What service should be included with a slitter-cutter-creaser purchase?
Confirm delivery requirements, installation, operator training, preventive maintenance, spare-parts access, and response coverage. Print & Finishing Solutions supports equipment across the Western U.S. and can review electrical, floor-space, and workflow requirements before installation.
Slitter-cutter-creaser comparison
This table is optimized to compare sheet capacity, stock range, feeding, controls, speed, and job fit across slitter-cutter-creaser equipment available from Print & Finishing Solutions.
| Equipment | Sheet Size | Stock Range | Feeding and Controls | Rated Speed | Best Fit |
|---|---|---|---|---|---|
| MBM AeroCut X Pro | 8.27 x 8.27 to 14.5 x 47.2 inches | 120 to 400 gsm | 4-inch tri-suction feeder, side blow, skew adjustment, ultrasonic double-feed detection, cut-mark registration, 10-inch touchscreen | Up to 34 sheets per minute; crease-only output up to 4,080 sheets per hour | Higher-volume, high-mix digital finishing with long sheets and frequent job changes |
| MBM AeroCut X | 8.27 x 8.27 to 14.57 x 29.53 inches; longer sheets with support | 120 to 400 gsm | Tri-suction feeder, side blow, skew adjustment, ultrasonic double-feed detection, cut-mark registration, 7-inch touchscreen | Application dependent; up to 20 sheets per minute for an A3 leaflet with center crease | Short-run cards, invitations, leaflets, tickets, and mixed-size gang-run layouts |
| MBM AeroCut Velocity | 8.27 x 8.27 to 14.5 x 63 inches | 120 to 400 gsm | 4-inch tri-suction feeder, adjustable crease depth, touchscreen, 263 preset jobs, optional barcode reader | Up to 20 sheets per minute | Long-sheet digital work and shops that need stored templates with adjustable creasing |
| GW PT335 SCC Multi | 8.26 x 8.26 to 13 x 26.5 inches; up to 40 inches when hand-fed | 150 to 350 gsm, up to 16-point stock | 4-inch feeder, 9-inch touchscreen, 64-job memory, image shift and size compensation, interchangeable crease and perf dies | Up to 25 sheets per minute on 8.5 x 11-inch sheets with two cuts and one crease | Full-bleed work requiring partial cross perfs, T-perfs, box perfs, or interchangeable dies |
| GW PT331 SCC | 8.27 x 8.27 to 14.5 x 26.75 inches | 150 to 350 gsm | Hand feed, registration-mark compensation, adjustable matrix creasing, preset programs, interchangeable crease and perf dies | Up to 21 sheets per minute with two cuts and one crease | Lower-volume finishing where flexible creasing and perforating matter more than an automatic pile feeder |
| Morgana AutoCut Pro | Up to 13 x 19 inches; 13 x 27.5 inches with optional long-sheet kit | 32 lb bond to 130 lb cover | Vacuum pile feeding, slide aligner, skew adjustment, double-feed detection, 4-inch touchscreen, 150-job recall | Eight 13 x 19-inch sheets per minute; up to 5,000 letter sheets per hour in crease-only mode | Long-sheet brochures and workflows that may add inline folding through a compatible folding module |
Get a Slitter-Cutter-Creaser Recommendation