FAQs

Should our shop choose a print-only printer or an integrated print-and-cut model?

Choose print-only equipment when a separate cutter can process jobs while the printer keeps running. Integrated print-and-cut models reduce device transfers and suit decal, label, and contour-cut work when unattended print-to-cut registration is more useful than parallel production.

What is the production difference between the Mimaki 200 and 330 Series?

The 200 Series uses one printhead and has a published four-color speed of 183 square feet per hour. The 330 Series uses two staggered heads and reaches 1,076.4 square feet per hour. Sellable throughput depends on print mode, file, ink coverage, and media. ([mimakiusa.com](https://www.mimakiusa.com/cjv200-series?utm_source=openai))

Is a 54-inch or 64-inch solvent printer the better production fit?

A 54-inch model has about 53.5 inches of printable width and suits shops focused on decals, signs, and narrower rolls. A 64-inch model prints up to 63.4 inches wide, matching more banner, wrap, wallcovering, and display media without trimming the input roll. ([mimakiusa.com](https://www.mimakiusa.com/cjv200-series?utm_source=openai))

When does the 31.5-inch CJV200-75 make sense in a production shop?

The CJV200-75 suits tight floor plans, departmental in-plants, and shops producing decals, safety markings, short-run labels, and smaller graphics. Its contour cutter keeps those jobs on one device, though the 31.5-inch printable width excludes standard 54-inch and 60-inch media workflows. ([mimakiusa.com](https://www.mimakiusa.com/cjv200-series?utm_source=openai))

Should we run four colors or an expanded eco-solvent ink set?

Four-color configurations favor speed and simpler ink management. Light cyan, light magenta, light black, and orange can improve gradients, neutral grays, skin tones, and gamut-dependent brand colors. Test production files against measured color targets before giving up four-color throughput for an expanded ink set.

How should quoted speed be evaluated before purchasing?

Treat maximum speed as a mechanical reference rather than expected daily output. Request samples and timed tests using your RIP, media, resolution, ink configuration, color settings, and finishing requirements. Measure accepted square feet per staffed hour, including drying, cutting, lamination, and rework.

How much roll capacity is needed for unattended solvent printing?

The JV200 and CJV200 support rolls up to 55 pounds. JV330 and CJV330 models support one roll up to 99.2 pounds. Optional multiroll handling carries three rolls totaling 198.4 pounds. The added capacity reduces roll changes during long banner and graphics runs. ([mimakiusa.com](https://www.mimakiusa.com/cjv200-series?utm_source=openai))

What should be reviewed before installing an eco-solvent printer?

Confirm electrical circuits, ventilation, operating temperature and humidity, RIP connectivity, media storage, take-up clearance, and lamination timing. Print & Finishing Solutions can review the installation path, operator training, ink supply, spare parts, and field service coverage across the Western United States before delivery.

This table is optimized to answer which Print & Finishing Solutions solvent printer fits each combination of media width, throughput, cutting workflow, ink choice, and roll capacity.

Published speeds are manufacturer test figures. Compare the selected production mode using the shop's own files, media, color targets, and finishing sequence before setting capacity or labor assumptions.