Shop finishing equipment at Print & Finishing Solutions.
-
Horizon HT-1000V Three-Knife Trimmer
GM-HOR-HT1000
The new Horizon HT-1000V Variable Three-Knife Trimmer operates in-line with Horizon perfect binders or off-line to deliver a wide range of input and output sizes for completely variable production.
• Heavy duty construction
• Consistent high quality finishing
• Hands free set up
• Variable production
> Learn More -
Horizon HT-80 3-Knife Trimmer
GM-HOR-HT80The Horizon HT-80 is an in-line or off-line three-knife trimmer that produces precise, clean cuts with no rough edges. • Cycle speed up to 1,000 books/hr
• Variable production
• Advanced automation
• Precision Trimming
> Learn More -
Horizon HT-300 Three-Side Trimmer
GM-HOR-HT300The HT-300 Three-side Trimmer features a fully automated setup with color touchscreen control. The system offers higher productivity, unique corner cut capability, optional flap cover trimming, and it’s automated setup can be barcode driven.
• Over 35% faster than previous models
• Processes up to 300 books/stacks/hr
• 4 books/stack x 300 = 1,200 bph > Learn More -
Challenge CMT-130TC Book Trimmer
GM-CMC-130TC
The ultimate book trimming solution necessary to be competitive, the Challenge CMT 130TC book trimmer is built from steel and cast-iron. The system can be configured as a hand-feed off-line trimmer for entry level cost-effective book finishing. Made in the USA.
• Powerful hydraulic cutting and clamping pressure
• Cuts up to 2” book
• 10.5” color touch screen display
• Easy to operate > Learn More -
Challenge CMT-330TC Book Trimmer
GM-CMC-330TC
The new Challenge CMT 330TC has expanded capability to finish cut LANDSCAPE FORMATTED BOOKS up to 12.1” tall by 12.9” wide and down to 5.875” tall by 3.937” wide. Made in the USA.
• Powerful hydraulic cutting and clamping pressure
• Cuts up to 2” book
• 10.5” color touch screen display
• Easy to operate
> Learn More -
Horizon CABS 6000 Perfect Binding System
GM-HOR-CABS_6000The innovative Standard Horizon CABS 6000 perfect binding system is bringing new levels of automation to production bookbinding.
• in-line stacker for stand alone gathering
• Twin milling stations
• Automated in-line cover scoring
• Advanced quality control features
> Learn More -
Horizon SB-09 Perfect Binder
GM-HOR-SB09 The Horizon SB-09 nine-clamp perfect binder features automated operation, push-button simplicity, and high-quality production perfect binding.
• 10.4" intelligent touch screen control
• Automatic air suction cover feeder
• Handles wide range of materials
• High efficiency
• Up to 4,000 books/hr
• In-line trimmer > Learn More -
Apollo XL-165 Substrate Cutter
GM-CWT-165The new Apollo XL can cut materials up to ¾” thick. It cuts
cleanly, accurately, without dust and noise. This is the most
affordable heavy-duty cutter available. Available in 4 sizes.
• 3x Quick change tool cartridges
• Integrated laser sight line
• Counter balance reduces operator fatigue
• Two Quick stops for added lateral support
• 5 year guarantee on all parts except bland and cutting wheels > Learn More -
Horizon SMSL-100 SmartSlitter
GM-HOR-SMSL100The Horizon SmartSlitter is an all-in-one smart sheet processing system that can slit, gutter cut, edge trim, cross-cut, perforate, and crease all in one pass.
• Paper sizes: 5.5” x 7.6” – 14” x 20”
• 20 creasing lines
• Positive and negative in one pass
• Production: 54 sheets/min.
• Standard business cards: 21-up > Learn More -
Horizon SmartStacker
GM-HOR-SMARTSTACKERThe Horizon SmartStacker converts a B2 size (20″ x 29″) sheet into up to 28 individual cut sheets with intelligent accumulation, stacking, and end-to-end JDF control.
• Designed to run in-line with HP Indigo 10000/12000 Press
• Can operate near-line to serve multiple print sources
• Sheet feeding capability: 4,500 sheets/hr > Learn More -
Challenge Paddy Wagon Padding Press
GM-CMC-PAD_WAG
Turn your padding operation from messy inconvenience to a high-capacity profit center with simple 1-2-3 operation: (1) Tilt & Load (2) Clamp (3) Tilt & Pad
• Sample capacity 15,000 8-1/2 x 11” Sheets
• Portable
• Heavy-duty casters
• Welded tubular steel construction > Learn More -
Challenge PakRak II
GM-CMC-PAK_RAK
Heavy duty construction with side handles. Holds up to 11" x 17" (28 x 43 cm) Stock.
• 500 lb (227 kg) Total Capacity
• 12 Shelves - 4 Fixed / 8 Adjustable
• Portable - Heavy-duty Industrial Casters
• Also available in XL
> Learn More
