Shop finishing equipment at Print & Finishing Solutions.
-
Horizon HT-300 Three-Side Trimmer
GM-HOR-HT300
The HT-300 Three-side Trimmer features a fully automated setup with color touchscreen control. The system offers higher productivity, unique corner cut capability, optional flap cover trimming, and it’s automated setup can be barcode driven.
• Over 35% faster than previous models
• Processes up to 300 books/stacks/hr
• 4 books/stack x 300 = 1,200 bph > Learn More -
Challenge CMT-130TC Book Trimmer
GM-CMC-130TC
The ultimate book trimming solution necessary to be competitive, the Challenge CMT 130TC book trimmer is built from steel and cast-iron. The system can be configured as a hand-feed off-line trimmer for entry level cost-effective book finishing. Made in the USA.
• Powerful hydraulic cutting and clamping pressure
• Cuts up to 2” book
• 10.5” color touch screen display
• Easy to operate > Learn More -
Challenge CMT-330TC Book Trimmer
GM-CMC-330TC
The new Challenge CMT 330TC has expanded capability to finish cut LANDSCAPE FORMATTED BOOKS up to 12.1” tall by 12.9” wide and down to 5.875” tall by 3.937” wide. Made in the USA.
• Powerful hydraulic cutting and clamping pressure
• Cuts up to 2” book
• 10.5” color touch screen display
• Easy to operate
> Learn More -
Horizon CABS 6000 Perfect Binding System
GM-HOR-CABS_6000The innovative Standard Horizon CABS 6000 perfect binding system is bringing new levels of automation to production bookbinding.
• in-line stacker for stand alone gathering
• Twin milling stations
• Automated in-line cover scoring
• Advanced quality control features
> Learn More -
Horizon SB-09 Perfect Binder
GM-HOR-SB09 The Horizon SB-09 nine-clamp perfect binder features automated operation, push-button simplicity, and high-quality production perfect binding.
• 10.4" intelligent touch screen control
• Automatic air suction cover feeder
• Handles wide range of materials
• High efficiency
• Up to 4,000 books/hr
• In-line trimmer > Learn More -
DestroyIt Shredder Strip-Cut 3/16"
SM-MBM-2270SC• Shred Volume: 5 gal. (3/4 for plastic)
• Dimensions (D x W x H): 8 3/4 x 13 1/2 x 21
• Sheet Capacity: 10-12
• Feed Opening: 8 3/4"
• Electrical Requirements: 115 volts
• Horsepower: 1/5 " > Learn MoreUS$338.00 -
DestroyIt Cross-Cut Shredder 1/8" x 1"
SM-MBM-2270CC• Shred Volume: 5 gal. (3/4 for plastic)
• Dimensions (D x W x H): 8 3/4 x 13 1/2 x 21
• Sheet Capacity: 5-6
• Feed Opening: 8 3/4"
• Electrical Requirements: 115 volts
• Horsepower: 1/5 > Learn MoreUS$415.00 -
DestroyIt Cross-Cut Shredder 3/16" x 1-1/2"
SM-MBM-2465CC• Shred Volume: 9 gal.
• Dimensions (D x W x H): 11 3/4 x 15 1/2 x 25
• Sheet Capacity: 13-15
• Feed Opening: 9 1/2 Inch
• Electrical Requirements: 115 volts
• Horsepower: 3/4 > Learn MoreUS$1,057.00 -
DestroyIt Cross-Cut Shredder 3/16"
SM-MBM-2465SC• Automatic Reverse and Power Cut-Off
• Automatic Stop if Shred Bin is Full
• SPS (Safety Protection System)
• Solid Steel Cutting Shafts
• Easy-Switch
• Patented Safety Flap > Learn MoreUS$909.00 -
DestroyIt Cross-Cut Shredder 3/16" x 1-1/2"
SM-MBM-2503CC• Start and stop is automatically controlled by photo sensor
• The 2503's high quality, hardened steel cutting shafts take staples, paper clips, and credit cards
• Dimensions (DxWxH): 14 3/4 x 19 3/4 x 34 1/4
• Sheet Capacity: 12-14
• Feed Opening: 10 1/4 Inch
• Electrical Requirements: 115 volts
• Horsepower: 3/4 > Learn MoreUS$1,371.00 -
DestroyIt Strip-Cut Shredder 3/16"
SM-MBM-2503SC• Quiet and powerful single phase motor (3/4 maximum horsepower)
• Fully enclosed, dust proof gearbox housing
• High quality wooden cabinet mounted on casters
• Pull-out bag frame for disposable shred bags
• 26 Gallon Bin Capacity
• Strip Width: 3/16" > Learn MoreUS$1,229.00 -
DestroyIt Cross-Cut Shredder 3/16" x 1-1/2"
SM-MBM-2604CC• Shred Volume: 26 gal
• Dimensions (DxWxH): 18 1/2 x 19 1/2 x 36 1/2
• Sheet Capacity: 12-14*
• Feed Opening: 10 1/4 Inch (260 mm)
• Electrical Requirements: 115 volts
• Horsepower: 1 > Learn MoreUS$1,846.00
