Shop finishing equipment at Print & Finishing Solutions.

Most popular model for commercial lamination. This is a very strong production machine built for working long shifts uninterrupted. Table surface will accommodate a large number of standard sheets and roller widths currently available on the market.
• Suitable for all types of installation work with self- adhesive materials.
• Workspace 3560x1560 mm 11ft. 8in. x 5ft. 1in.
• Bed size 4000x1600 mm 13ft.1in. x 5ft. 3in.
• Materials 0-70 mm/0-2,8in.
• Required air 6-8bar/87-116psi
• Capacity up to 140 m2/H 1500ft2/H > Learn More

Complete workstation solution for application and cut works.

• Electronic pressure setting
• Heated roller 86F - 140F (optional)
• Remote controlled motorized horizontal drive (optional)
• Multiple height options
• Storage units
• Foldable roller
• Heavy duty > Learn More

With the Ultima 65 laminator, it’s easy to protect and preserve your most important printed teaching tools. The EZ Load film system makes loading fool-proof, while the pivoting feed table provides easy access for film changing.

• 27" wide laminating width
• Warms up less than 10 mins
• One touch AutoSpeed feature
• Auto shut off feature for safety


> Learn More

The ultimate book trimming solution necessary to be competitive, the Challenge CMT 130TC book trimmer is built from steel and cast-iron. The system can be configured as a hand-feed off-line trimmer for entry level cost-effective book finishing. Made in the USA.

• Powerful hydraulic cutting and clamping pressure
• Cuts up to 2” book
• 10.5” color touch screen display
• Easy to operate > Learn More

The new Challenge CMT 330TC has expanded capability to finish cut LANDSCAPE FORMATTED BOOKS up to 12.1” tall by 12.9” wide and down to 5.875” tall by 3.937” wide. Made in the USA.

• Powerful hydraulic cutting and clamping pressure
• Cuts up to 2” book
• 10.5” color touch screen display
• Easy to operate
> Learn More

The new Apollo XL can cut materials up to ¾” thick. It cuts
cleanly, accurately, without dust and noise. This is the most                                           
affordable heavy-duty cutter available. Available in 4 sizes.
• 3x Quick change tool cartridges
• Integrated laser sight line
• Counter balance reduces operator fatigue
• Two Quick stops for added lateral support
• 5 year guarantee on all parts except bland and cutting wheels > Learn More

• Shred Volume: 5 gal. (3/4 for plastic)
• Dimensions (D x W x H): 8 3/4 x 13 1/2 x 21
• Sheet Capacity: 10-12
• Feed Opening: 8 3/4"
• Electrical Requirements: 115 volts
• Horsepower: 1/5 " > Learn More

• Shred Volume: 5 gal. (3/4 for plastic)
• Dimensions (D x W x H): 8 3/4 x 13 1/2 x 21
• Sheet Capacity: 5-6
• Feed Opening: 8 3/4"
• Electrical Requirements: 115 volts
• Horsepower: 1/5 > Learn More

• Shred Volume: 9 gal.
• Dimensions (D x W x H): 11 3/4 x 15 1/2 x 25
• Sheet Capacity: 13-15
• Feed Opening: 9 1/2 Inch
• Electrical Requirements: 115 volts
• Horsepower: 3/4 > Learn More

• Automatic Reverse and Power Cut-Off
• Automatic Stop if Shred Bin is Full
• SPS (Safety Protection System)
• Solid Steel Cutting Shafts
• Easy-Switch
• Patented Safety Flap > Learn More

• Start and stop is automatically controlled by photo sensor
• The 2503's high quality, hardened steel cutting shafts take staples, paper clips, and credit cards
• Dimensions (DxWxH): 14 3/4 x 19 3/4 x 34 1/4
• Sheet Capacity: 12-14
• Feed Opening: 10 1/4 Inch
• Electrical Requirements: 115 volts
• Horsepower: 3/4 > Learn More

• Quiet and powerful single phase motor (3/4 maximum horsepower)
• Fully enclosed, dust proof gearbox housing
• High quality wooden cabinet mounted on casters
• Pull-out bag frame for disposable shred bags
• 26 Gallon Bin Capacity
• Strip Width: 3/16" > Learn More