Shop finishing equipment at Print & Finishing Solutions.

The ultimate book trimming solution necessary to be competitive, the Challenge CMT 130TC book trimmer is built from steel and cast-iron. The system can be configured as a hand-feed off-line trimmer for entry level cost-effective book finishing. Made in the USA.

• Powerful hydraulic cutting and clamping pressure
• Cuts up to 2” book
• 10.5” color touch screen display
• Easy to operate > Learn More

The new Challenge CMT 330TC has expanded capability to finish cut LANDSCAPE FORMATTED BOOKS up to 12.1” tall by 12.9” wide and down to 5.875” tall by 3.937” wide. Made in the USA.

• Powerful hydraulic cutting and clamping pressure
• Cuts up to 2” book
• 10.5” color touch screen display
• Easy to operate
> Learn More

Perfect for any customer, these precision cutting devices offer repeatable fast cutting on a wide range of media. Perfect for t-shirt transfers, decals, window lettering, cardstock projects and more.

• Available in 29” and 61”
• Continuous crop mark detection
• Three selectable job speeds
• FineCut9 and SimplePop software included > Learn More

• Shred Volume: 5 gal. (3/4 for plastic)
• Dimensions (D x W x H): 8 3/4 x 13 1/2 x 21
• Sheet Capacity: 10-12
• Feed Opening: 8 3/4"
• Electrical Requirements: 115 volts
• Horsepower: 1/5 " > Learn More

• Shred Volume: 5 gal. (3/4 for plastic)
• Dimensions (D x W x H): 8 3/4 x 13 1/2 x 21
• Sheet Capacity: 5-6
• Feed Opening: 8 3/4"
• Electrical Requirements: 115 volts
• Horsepower: 1/5 > Learn More

• Shred Volume: 9 gal.
• Dimensions (D x W x H): 11 3/4 x 15 1/2 x 25
• Sheet Capacity: 13-15
• Feed Opening: 9 1/2 Inch
• Electrical Requirements: 115 volts
• Horsepower: 3/4 > Learn More

• Automatic Reverse and Power Cut-Off
• Automatic Stop if Shred Bin is Full
• SPS (Safety Protection System)
• Solid Steel Cutting Shafts
• Easy-Switch
• Patented Safety Flap > Learn More

• Start and stop is automatically controlled by photo sensor
• The 2503's high quality, hardened steel cutting shafts take staples, paper clips, and credit cards
• Dimensions (DxWxH): 14 3/4 x 19 3/4 x 34 1/4
• Sheet Capacity: 12-14
• Feed Opening: 10 1/4 Inch
• Electrical Requirements: 115 volts
• Horsepower: 3/4 > Learn More

• Quiet and powerful single phase motor (3/4 maximum horsepower)
• Fully enclosed, dust proof gearbox housing
• High quality wooden cabinet mounted on casters
• Pull-out bag frame for disposable shred bags
• 26 Gallon Bin Capacity
• Strip Width: 3/16" > Learn More

• Shred Volume: 26 gal
• Dimensions (DxWxH): 18 1/2 x 19 1/2 x 36 1/2
• Sheet Capacity: 12-14*
• Feed Opening: 10 1/4 Inch (260 mm)
• Electrical Requirements: 115 volts
• Horsepower: 1 > Learn More

• Automatic start/stop controlled by photo cell
• Patented Electronic Capacity Control (ECC) indicator prevents jams by monitoring sheet capacity levels during operation
• High quality, hardened steel cutting shafts take staples, paper clips, credit cards, and CDs/DVDs
• Quiet and powerful 1 horse power single phase motor rated for continuous high volume
• Sturdy Twin Drive System with fully enclosed gear box housing
• High quality wooden cabinet mounted on casters > Learn More

• Shred Volume: 32 gal
• Dimensions (D x W x H): 18 1/2 x 21 x 36 1/2
• Sheet Capacity: 22-25
• Feed Opening: 12 Inch
• Electrical Requirements: 115 volts
• Horsepower: 1 > Learn More