Filter Results
- Manufacturer
-
- Challenge
- Amerilam
- CUTWORX
- KAMA
- MBM (39)
- Akiles (35)
- Horizon (34)
- Morgana (32)
- Preferred Pack (28)
- FastBind (10)
- Graphic Whizard (10)
- Formax (9)
- Rhin-O-Tuff (9)
- JBI (6)
- Vivid Matrix (3)
- Fujipla (2)
- Tamerica (2)
- Mimaki (2)
- Bauman (1)
- GBC (1)
- Martin Yale (1)
- Perfecta (1)
- Foliant (12)
- Summa (9)
- Graphic finishing partners (7)
- Micron (7)
- TEC Lighting (2)
- Valiani (2)
- Baum (1)
- Powis (1)
- Lami (1)
Shop finishing equipment at Print & Finishing Solutions.
-
Challenge CMT-130TC Book Trimmer
GM-CMC-130TCThe ultimate book trimming solution necessary to be competitive, the Challenge CMT 130TC book trimmer is built from steel and cast-iron. The system can be configured as a hand-feed off-line trimmer for entry level cost-effective book finishing. Made in the USA.
• Powerful hydraulic cutting and clamping pressure
• Cuts up to 2” book
• 10.5” color touch screen display
• Easy to operate > Learn More -
Challenge CMT-330TC Book Trimmer
GM-CMC-330TCThe new Challenge CMT 330TC has expanded capability to finish cut LANDSCAPE FORMATTED BOOKS up to 12.1” tall by 12.9” wide and down to 5.875” tall by 3.937” wide. Made in the USA.
• Powerful hydraulic cutting and clamping pressure
• Cuts up to 2” book
• 10.5” color touch screen display
• Easy to operate
> Learn More -
Apollo XL-165 Substrate Cutter
GM-CWT-165The new Apollo XL can cut materials up to ¾” thick. It cuts
cleanly, accurately, without dust and noise. This is the most
affordable heavy-duty cutter available. Available in 4 sizes.
• 3x Quick change tool cartridges
• Integrated laser sight line
• Counter balance reduces operator fatigue
• Two Quick stops for added lateral support
• 5 year guarantee on all parts except bland and cutting wheels > Learn More -
Challenge Paddy Wagon Padding Press
GM-CMC-PAD_WAGTurn your padding operation from messy inconvenience to a high-capacity profit center with simple 1-2-3 operation: (1) Tilt & Load (2) Clamp (3) Tilt & Pad
• Sample capacity 15,000 8-1/2 x 11” Sheets
• Portable
• Heavy-duty casters
• Welded tubular steel construction > Learn More -
Challenge PakRak II
GM-CMC-PAK_RAKHeavy duty construction with side handles. Holds up to 11" x 17" (28 x 43 cm) Stock.
• 500 lb (227 kg) Total Capacity
• 12 Shelves - 4 Fixed / 8 Adjustable
• Portable - Heavy-duty Industrial Casters
• Also available in XL
> Learn More -
Challenge Handy Padder
GM-CMC-HANDYPADDERThe Challenge HANDY PADDER design provides a portable and compact table top padding device for the right price.
• Easy 1-2-3 Operation
• Large capacity
• Self-aligning gravity load
• Table-top design
> Learn More -
Challenge PakRak XL
GM-CMC-PAK_RAK_XLThe Pak-Rak XL an invaluable cart for the high volume printer. Place near printer for stacking, organizing, storing for pre- and post- print production.
• Holds 14"x20" stock
• 12 shelf surfaces.
• Optional: 4 additional shelves
• 500lbs total capacity
> Learn More -
Challenge Handy Cart
GM-CMC-HANDYCARTIncredibly helpful for the busy print shop. Shipped in one piece, the Handy Cart is constructed of heavy gauge, welded steel. Made in the USA.
• Holds 4 piles of 11"x17" stock up to 21" tall
• 500lbs Total Capacity
• Portable- Four 5" swivel casters for easy rolling
• Full size lower shelf with lip > Learn More -
Challenge iJOG Air
GM-CMC-IJOG_AIRThe Challenge iJOG air-flow heavy duty jogger has the power and air assistance to quickly jog up to a 4" lift of stock. With a 12"x18" maximum sheet size, the operator no longer has to add a small lift to achieve a neat block of sheets.
• Pedal controlled
• Robust, electro-mechanical jogging action
• Front side loading
• Adjustable air flow - dial from 0 to 112 CFM
> Learn More -
Challenge Handy Jog
GM-CMC-HANDYJOGThe Challenge Handy Jog is a low cost, highly effective jogger. With a small footprint, the Handy Jog can be placed beside any machine. Optional foot switch. Made in the USA.
• Front side loading
• Powerful jogging action
• Quiet operation
• 2 sizes: Standard (8.5"x11") and Large (11" x 17")
> Learn More -
Challenge Handy Jog-Large
GM-CMC-HANDYJOG_LTThe Challenge Handy Jog is a low cost, highly effective jogger. With a small footprint, the Handy Jog can be placed beside any machine. Optional foot switch. Made in the USA.
• Front side loading
• Powerful jogging action
• Quiet operation
• 2 sizes: Standard (8.5"x11") and Large (11" x 17") > Learn More