Shop finishing equipment at Print & Finishing Solutions.
-
GW PT33LSC Automated Laminator
GM-GWH-PT33LSC
Laminate, slit and cut with the GW PT 33LSC. Designed for the digital short-run printer, the PT 33LSC cuts to bleed as well as has variable size encapsulation mode.
• Slits and cuts to size
• Film choices of gloss, matte, soft touch and more
• Pouch mode with variable encapsulation size
• Anti-curl device
> Learn More -
Numbering, Perforating, Scoring & Slitting System
GM-GWH-6000
Operating at speeds up to 6000 sheets per hour, the “6000” makes fast and easy work of finishing needs.
• Feed sets unglued or glued side
• Accurate .010″ register
• 1 number per head per sheet > Learn More -
Numbering System
GM-GWH-12000
The GW12000 has production speeds of 12000 sph while maintaining registration and accuracy. It has a 30 inch long register board, individually pressure adjustable perf/score/slit, tireless pneumatic heads, and a conveyor outfeed delivery.
• Up to 100 numbering positions per head per sheet
• Optional slitting blade available
• Heads rotate & lock throughout 360 degrees for perfect register > Learn More -
Challenge CMT-130TC Book Trimmer
GM-CMC-130TC
The ultimate book trimming solution necessary to be competitive, the Challenge CMT 130TC book trimmer is built from steel and cast-iron. The system can be configured as a hand-feed off-line trimmer for entry level cost-effective book finishing. Made in the USA.
• Powerful hydraulic cutting and clamping pressure
• Cuts up to 2” book
• 10.5” color touch screen display
• Easy to operate > Learn More -
Challenge CMT-330TC Book Trimmer
GM-CMC-330TC
The new Challenge CMT 330TC has expanded capability to finish cut LANDSCAPE FORMATTED BOOKS up to 12.1” tall by 12.9” wide and down to 5.875” tall by 3.937” wide. Made in the USA.
• Powerful hydraulic cutting and clamping pressure
• Cuts up to 2” book
• 10.5” color touch screen display
• Easy to operate
> Learn More -
DestroyIt Shredder Strip-Cut 3/16"
SM-MBM-2270SC• Shred Volume: 5 gal. (3/4 for plastic)
• Dimensions (D x W x H): 8 3/4 x 13 1/2 x 21
• Sheet Capacity: 10-12
• Feed Opening: 8 3/4"
• Electrical Requirements: 115 volts
• Horsepower: 1/5 " > Learn MoreUS$338.00 -
DestroyIt Cross-Cut Shredder 1/8" x 1"
SM-MBM-2270CC• Shred Volume: 5 gal. (3/4 for plastic)
• Dimensions (D x W x H): 8 3/4 x 13 1/2 x 21
• Sheet Capacity: 5-6
• Feed Opening: 8 3/4"
• Electrical Requirements: 115 volts
• Horsepower: 1/5 > Learn MoreUS$415.00 -
DestroyIt Cross-Cut Shredder 3/16" x 1-1/2"
SM-MBM-2465CC• Shred Volume: 9 gal.
• Dimensions (D x W x H): 11 3/4 x 15 1/2 x 25
• Sheet Capacity: 13-15
• Feed Opening: 9 1/2 Inch
• Electrical Requirements: 115 volts
• Horsepower: 3/4 > Learn MoreUS$1,057.00 -
DestroyIt Cross-Cut Shredder 3/16"
SM-MBM-2465SC• Automatic Reverse and Power Cut-Off
• Automatic Stop if Shred Bin is Full
• SPS (Safety Protection System)
• Solid Steel Cutting Shafts
• Easy-Switch
• Patented Safety Flap > Learn MoreUS$909.00 -
DestroyIt Cross-Cut Shredder 3/16" x 1-1/2"
SM-MBM-2503CC• Start and stop is automatically controlled by photo sensor
• The 2503's high quality, hardened steel cutting shafts take staples, paper clips, and credit cards
• Dimensions (DxWxH): 14 3/4 x 19 3/4 x 34 1/4
• Sheet Capacity: 12-14
• Feed Opening: 10 1/4 Inch
• Electrical Requirements: 115 volts
• Horsepower: 3/4 > Learn MoreUS$1,371.00 -
DestroyIt Strip-Cut Shredder 3/16"
SM-MBM-2503SC• Quiet and powerful single phase motor (3/4 maximum horsepower)
• Fully enclosed, dust proof gearbox housing
• High quality wooden cabinet mounted on casters
• Pull-out bag frame for disposable shred bags
• 26 Gallon Bin Capacity
• Strip Width: 3/16" > Learn MoreUS$1,229.00 -
DestroyIt Cross-Cut Shredder 3/16" x 1-1/2"
SM-MBM-2604CC• Shred Volume: 26 gal
• Dimensions (DxWxH): 18 1/2 x 19 1/2 x 36 1/2
• Sheet Capacity: 12-14*
• Feed Opening: 10 1/4 Inch (260 mm)
• Electrical Requirements: 115 volts
• Horsepower: 1 > Learn MoreUS$1,846.00
