Filter Results
- Manufacturer
-
- Challenge
- FastBind
- Formax
- Micron
- MBM (39)
- Akiles (35)
- Horizon (34)
- Morgana (32)
- Preferred Pack (28)
- Graphic Whizard (10)
- Rhin-O-Tuff (9)
- JBI (6)
- Vivid Matrix (3)
- Fujipla (2)
- Tamerica (2)
- Mimaki (2)
- Amerilam (1)
- Bauman (1)
- GBC (1)
- Martin Yale (1)
- Perfecta (1)
- CUTWORX (19)
- Foliant (12)
- Summa (9)
- Graphic finishing partners (7)
- KAMA (2)
- TEC Lighting (2)
- Valiani (2)
- Baum (1)
- Powis (1)
- Lami (1)
Shop finishing equipment at Print & Finishing Solutions.
-
-
-
-
-
FastBind Booxter Express Plus
GM-FBI-EXPLUS
The Fastbind Booxter Express Plus "All in One" book binding system has everything you need to make custom printed photo books and albums. With this system you can make custom printed hard covers, then you can bind digital print into a photobook or lay flat mounted panoramic albums into that cover.
• Custom printed hard covers from your own print of any size up to 12 x12 (24" open book)
• Photo books with duplex prints - traditional digital print or Flexbind Lay Flat paper
• Panoramic Lay-flat Photo Albums- one side print, any material, continuous left to right > Learn More -
Challenge CMT-130TC Book Trimmer
GM-CMC-130TCThe ultimate book trimming solution necessary to be competitive, the Challenge CMT 130TC book trimmer is built from steel and cast-iron. The system can be configured as a hand-feed off-line trimmer for entry level cost-effective book finishing. Made in the USA.
• Powerful hydraulic cutting and clamping pressure
• Cuts up to 2” book
• 10.5” color touch screen display
• Easy to operate > Learn More -
Challenge CMT-330TC Book Trimmer
GM-CMC-330TCThe new Challenge CMT 330TC has expanded capability to finish cut LANDSCAPE FORMATTED BOOKS up to 12.1” tall by 12.9” wide and down to 5.875” tall by 3.937” wide. Made in the USA.
• Powerful hydraulic cutting and clamping pressure
• Cuts up to 2” book
• 10.5” color touch screen display
• Easy to operate
> Learn More -
Challenge Paddy Wagon Padding Press
GM-CMC-PAD_WAGTurn your padding operation from messy inconvenience to a high-capacity profit center with simple 1-2-3 operation: (1) Tilt & Load (2) Clamp (3) Tilt & Pad
• Sample capacity 15,000 8-1/2 x 11” Sheets
• Portable
• Heavy-duty casters
• Welded tubular steel construction > Learn More -
Challenge PakRak II
GM-CMC-PAK_RAKHeavy duty construction with side handles. Holds up to 11" x 17" (28 x 43 cm) Stock.
• 500 lb (227 kg) Total Capacity
• 12 Shelves - 4 Fixed / 8 Adjustable
• Portable - Heavy-duty Industrial Casters
• Also available in XL
> Learn More -
Challenge Handy Padder
GM-CMC-HANDYPADDERThe Challenge HANDY PADDER design provides a portable and compact table top padding device for the right price.
• Easy 1-2-3 Operation
• Large capacity
• Self-aligning gravity load
• Table-top design
> Learn More -
Challenge PakRak XL
GM-CMC-PAK_RAK_XLThe Pak-Rak XL an invaluable cart for the high volume printer. Place near printer for stacking, organizing, storing for pre- and post- print production.
• Holds 14"x20" stock
• 12 shelf surfaces.
• Optional: 4 additional shelves
• 500lbs total capacity
> Learn More -
Challenge Handy Cart
GM-CMC-HANDYCARTIncredibly helpful for the busy print shop. Shipped in one piece, the Handy Cart is constructed of heavy gauge, welded steel. Made in the USA.
• Holds 4 piles of 11"x17" stock up to 21" tall
• 500lbs Total Capacity
• Portable- Four 5" swivel casters for easy rolling
• Full size lower shelf with lip > Learn More