Filter Results
- Manufacturer
-
- Challenge
- Vivid Matrix
- Micron
- KAMA
- MBM (39)
- Akiles (35)
- Horizon (34)
- Morgana (32)
- Preferred Pack (28)
- FastBind (10)
- Graphic Whizard (10)
- Formax (9)
- Rhin-O-Tuff (9)
- JBI (6)
- Fujipla (2)
- Tamerica (2)
- Mimaki (2)
- Amerilam (1)
- Bauman (1)
- GBC (1)
- Martin Yale (1)
- Perfecta (1)
- CUTWORX (19)
- Foliant (12)
- Summa (9)
- Graphic finishing partners (7)
- TEC Lighting (2)
- Valiani (2)
- Baum (1)
- Powis (1)
- Lami (1)
Shop finishing equipment at Print & Finishing Solutions.
-
Matrix 370 Pneumatic Laminator
GM-VLT-MX370P
The Matrix MX-370P SRA3 Pneumatic single-sided laminating, digital foiling and special effects system. Create eye-catching finishes using foil and special effects with the pneumatic option, achievable with adjustable pressure rollers.
• Semi-automatic feed
• Pneumatic pressure
• Anti-curl technology
• Automatic separator
• Multifunctional - laminate, foil & create spot UV-style effects > Learn More -
Matrix 530 Duplex Pneumatic Laminator
GM-VLT-MX530DP
Winner of Quick Printing Readers’ Choice Top Products Awards, the Matrix Duplex is an incredibly cost-effective system that allows printers to laminate single-side, double-side and encapsulate their work, in-house.
• Semi-automatic feed
• Pneumatic pressure
• Multifunctional - laminate, foil & create spot UV-style effects > Learn More -
Matrix Omni-Flow 330 (SRA3) Deep Pile Feeder
GM-CWT-OMNI330The Matrix Omni-Flow Deep Pile Feeder is a modular system that is designed to be simple to install, configure and operate. The feeder can be retro-fitted to any Matrix Pneumatic or Matrix Duplex model.
• Retrofits all Matrix pneumatic and duplex models
• Quick and easy set-up and operation
• Fully automatic lamination and foiling
• Change between paper stocks in seconds > Learn More -
Challenge CMT-130TC Book Trimmer
GM-CMC-130TCThe ultimate book trimming solution necessary to be competitive, the Challenge CMT 130TC book trimmer is built from steel and cast-iron. The system can be configured as a hand-feed off-line trimmer for entry level cost-effective book finishing. Made in the USA.
• Powerful hydraulic cutting and clamping pressure
• Cuts up to 2” book
• 10.5” color touch screen display
• Easy to operate > Learn More -
Challenge CMT-330TC Book Trimmer
GM-CMC-330TCThe new Challenge CMT 330TC has expanded capability to finish cut LANDSCAPE FORMATTED BOOKS up to 12.1” tall by 12.9” wide and down to 5.875” tall by 3.937” wide. Made in the USA.
• Powerful hydraulic cutting and clamping pressure
• Cuts up to 2” book
• 10.5” color touch screen display
• Easy to operate
> Learn More -
Challenge Paddy Wagon Padding Press
GM-CMC-PAD_WAGTurn your padding operation from messy inconvenience to a high-capacity profit center with simple 1-2-3 operation: (1) Tilt & Load (2) Clamp (3) Tilt & Pad
• Sample capacity 15,000 8-1/2 x 11” Sheets
• Portable
• Heavy-duty casters
• Welded tubular steel construction > Learn More -
Challenge PakRak II
GM-CMC-PAK_RAKHeavy duty construction with side handles. Holds up to 11" x 17" (28 x 43 cm) Stock.
• 500 lb (227 kg) Total Capacity
• 12 Shelves - 4 Fixed / 8 Adjustable
• Portable - Heavy-duty Industrial Casters
• Also available in XL
> Learn More -
Challenge Handy Padder
GM-CMC-HANDYPADDERThe Challenge HANDY PADDER design provides a portable and compact table top padding device for the right price.
• Easy 1-2-3 Operation
• Large capacity
• Self-aligning gravity load
• Table-top design
> Learn More -
Challenge PakRak XL
GM-CMC-PAK_RAK_XLThe Pak-Rak XL an invaluable cart for the high volume printer. Place near printer for stacking, organizing, storing for pre- and post- print production.
• Holds 14"x20" stock
• 12 shelf surfaces.
• Optional: 4 additional shelves
• 500lbs total capacity
> Learn More -
Challenge Handy Cart
GM-CMC-HANDYCARTIncredibly helpful for the busy print shop. Shipped in one piece, the Handy Cart is constructed of heavy gauge, welded steel. Made in the USA.
• Holds 4 piles of 11"x17" stock up to 21" tall
• 500lbs Total Capacity
• Portable- Four 5" swivel casters for easy rolling
• Full size lower shelf with lip > Learn More -
Challenge iJOG Air
GM-CMC-IJOG_AIRThe Challenge iJOG air-flow heavy duty jogger has the power and air assistance to quickly jog up to a 4" lift of stock. With a 12"x18" maximum sheet size, the operator no longer has to add a small lift to achieve a neat block of sheets.
• Pedal controlled
• Robust, electro-mechanical jogging action
• Front side loading
• Adjustable air flow - dial from 0 to 112 CFM
> Learn More -
Challenge Handy Jog
GM-CMC-HANDYJOGThe Challenge Handy Jog is a low cost, highly effective jogger. With a small footprint, the Handy Jog can be placed beside any machine. Optional foot switch. Made in the USA.
• Front side loading
• Powerful jogging action
• Quiet operation
• 2 sizes: Standard (8.5"x11") and Large (11" x 17")
> Learn More