Filter Results
- Manufacturer
-
- Challenge
- Graphic Whizard
- Vivid Matrix
- Bauman
- MBM (39)
- Akiles (35)
- Horizon (34)
- Morgana (32)
- Preferred Pack (28)
- FastBind (10)
- Formax (9)
- Rhin-O-Tuff (9)
- JBI (6)
- Fujipla (2)
- Tamerica (2)
- Mimaki (2)
- Amerilam (1)
- GBC (1)
- Martin Yale (1)
- Perfecta (1)
- CUTWORX (19)
- Foliant (12)
- Summa (9)
- Graphic finishing partners (7)
- Micron (7)
- KAMA (2)
- TEC Lighting (2)
- Valiani (2)
- Baum (1)
- Powis (1)
- Lami (1)
Shop finishing equipment at Print & Finishing Solutions.
-
Numbering System
GM-GWH-12000The GW12000 has production speeds of 12000 sph while maintaining registration and accuracy. It has a 30 inch long register board, individually pressure adjustable perf/score/slit, tireless pneumatic heads, and a conveyor outfeed delivery.
• Up to 100 numbering positions per head per sheet
• Optional slitting blade available
• Heads rotate & lock throughout 360 degrees for perfect register > Learn More -
Challenge CMT-130TC Book Trimmer
GM-CMC-130TCThe ultimate book trimming solution necessary to be competitive, the Challenge CMT 130TC book trimmer is built from steel and cast-iron. The system can be configured as a hand-feed off-line trimmer for entry level cost-effective book finishing. Made in the USA.
• Powerful hydraulic cutting and clamping pressure
• Cuts up to 2” book
• 10.5” color touch screen display
• Easy to operate > Learn More -
Challenge CMT-330TC Book Trimmer
GM-CMC-330TCThe new Challenge CMT 330TC has expanded capability to finish cut LANDSCAPE FORMATTED BOOKS up to 12.1” tall by 12.9” wide and down to 5.875” tall by 3.937” wide. Made in the USA.
• Powerful hydraulic cutting and clamping pressure
• Cuts up to 2” book
• 10.5” color touch screen display
• Easy to operate
> Learn More -
GW Slitter Cutter Creaser
GM-GWH-PT331SCCThe PT 331SCC slits, cuts, creases or perfs in a single pass. Full or partial cross perforate up to 32 creases/perfs with registration mark cut compensation. Slitting formats are easily changeable without the need of replacing cartridges
• 150-350 gsm
• Interchangeable crease / perf dies
• Preset programs for quick job changeover
• Manual cut/crease input for customized jobs > Learn More -
GW PT335 Multi Slitter Cutter Creaser
GM-GWH-PT335SCCThe new PT 335SCC Multi is a complete full-bleed finishing system to fit the digital marketplace. Equipped with interchangeable creasing/ perfing dies the PT 335SCC Multi can quickly switch over from perfing to creasing while preventing digital toner cracking. Strike perf capabilities means that the PT 335SCC Multi can now do partial perfs in both directions for “T” or “box” perfs.
• 4" deep pile feeder
• Multi Accessory Output
• 9" color touchscreen > Learn More -
GW PT8336 SCC Auto Feed/Slit Creasing System
GM-GWH-PT8336SCCThe PT 8336SCC Multi is a complete full-bleed finishing system designed for the digital marketplace. Equipped with interchangeable creasing/perfing dies, the PT 8336CC Multi can quickly switch from perfing to creasing to prevent digital toner cracking.
• 4" deep pile feeder
• Multi accessory output
• 9" color touchscreen
• Built in job creator and 64 job program memory
> Learn More -
Challenge Paddy Wagon Padding Press
GM-CMC-PAD_WAGTurn your padding operation from messy inconvenience to a high-capacity profit center with simple 1-2-3 operation: (1) Tilt & Load (2) Clamp (3) Tilt & Pad
• Sample capacity 15,000 8-1/2 x 11” Sheets
• Portable
• Heavy-duty casters
• Welded tubular steel construction > Learn More -
Challenge PakRak II
GM-CMC-PAK_RAKHeavy duty construction with side handles. Holds up to 11" x 17" (28 x 43 cm) Stock.
• 500 lb (227 kg) Total Capacity
• 12 Shelves - 4 Fixed / 8 Adjustable
• Portable - Heavy-duty Industrial Casters
• Also available in XL
> Learn More -
Baumann BSB 3L Jogger
GM-PER-BSB3LFor jogging of sheets (either left or right) with a pneumatically driven air removal roller with clamping device, lift stabilizer, and lift pusher. Designed for the most difficult stocks.
• Maximum size: 31 7/16" x 44 7/8"
• Variable pressure air removal roller
• Variable speed air removal roller
• Variable jogging intensity > Learn More -
Challenge Handy Padder
GM-CMC-HANDYPADDERThe Challenge HANDY PADDER design provides a portable and compact table top padding device for the right price.
• Easy 1-2-3 Operation
• Large capacity
• Self-aligning gravity load
• Table-top design
> Learn More -
Challenge PakRak XL
GM-CMC-PAK_RAK_XLThe Pak-Rak XL an invaluable cart for the high volume printer. Place near printer for stacking, organizing, storing for pre- and post- print production.
• Holds 14"x20" stock
• 12 shelf surfaces.
• Optional: 4 additional shelves
• 500lbs total capacity
> Learn More -
Challenge Handy Cart
GM-CMC-HANDYCARTIncredibly helpful for the busy print shop. Shipped in one piece, the Handy Cart is constructed of heavy gauge, welded steel. Made in the USA.
• Holds 4 piles of 11"x17" stock up to 21" tall
• 500lbs Total Capacity
• Portable- Four 5" swivel casters for easy rolling
• Full size lower shelf with lip > Learn More