Shop finishing equipment at Print & Finishing Solutions.

The Fastbind Booxter Express Plus "All in One" book binding system has everything you need to make custom printed photo books and albums. With this system you can make custom printed hard covers, then you can bind digital print into a photobook or lay flat mounted panoramic albums into that cover.

• Custom printed hard covers from your own print of any size up to 12 x12 (24" open book)
• Photo books with duplex prints - traditional digital print or Flexbind Lay Flat paper
• Panoramic Lay-flat Photo Albums- one side print, any material, continuous left to right > Learn More

The ultimate book trimming solution necessary to be competitive, the Challenge CMT 130TC book trimmer is built from steel and cast-iron. The system can be configured as a hand-feed off-line trimmer for entry level cost-effective book finishing. Made in the USA.

• Powerful hydraulic cutting and clamping pressure
• Cuts up to 2” book
• 10.5” color touch screen display
• Easy to operate > Learn More

The new Challenge CMT 330TC has expanded capability to finish cut LANDSCAPE FORMATTED BOOKS up to 12.1” tall by 12.9” wide and down to 5.875” tall by 3.937” wide. Made in the USA.

• Powerful hydraulic cutting and clamping pressure
• Cuts up to 2” book
• 10.5” color touch screen display
• Easy to operate
> Learn More

Turn your padding operation from messy inconvenience to a high-capacity profit center with simple 1-2-3 operation: (1) Tilt & Load (2) Clamp (3) Tilt & Pad

• Sample capacity 15,000 8-1/2 x 11” Sheets
• Portable
• Heavy-duty casters
• Welded tubular steel construction > Learn More

Heavy duty construction with side handles. Holds up to 11" x 17" (28 x 43 cm) Stock.

• 500 lb (227 kg) Total Capacity
• 12 Shelves - 4 Fixed / 8 Adjustable
• Portable - Heavy-duty Industrial Casters
• Also available in XL

> Learn More

The Challenge HANDY PADDER design provides a portable and compact table top padding device for the right price.

• Easy 1-2-3 Operation
• Large capacity
• Self-aligning gravity load
• Table-top design

> Learn More

The Pak-Rak XL an invaluable cart for the high volume printer. Place near printer for stacking, organizing, storing for pre- and post- print production.

• Holds 14"x20" stock
• 12 shelf surfaces.
• Optional: 4 additional shelves
• 500lbs total capacity
> Learn More

Incredibly helpful for the busy print shop. Shipped in one piece, the Handy Cart is constructed of heavy gauge, welded steel. Made in the USA.

• Holds 4 piles of 11"x17" stock up to 21" tall
• 500lbs Total Capacity
• Portable- Four 5" swivel casters for easy rolling
• Full size lower shelf with lip > Learn More

The Challenge iJOG air-flow heavy duty jogger has the power and air assistance to quickly jog up to a 4" lift of stock. With a 12"x18" maximum sheet size, the operator no longer has to add a small lift to achieve a neat block of sheets.

• Pedal controlled
• Robust, electro-mechanical jogging action
• Front side loading
• Adjustable air flow - dial from 0 to 112 CFM

> Learn More

The Challenge Handy Jog is a low cost, highly effective jogger. With a small footprint, the Handy Jog can be placed beside any machine. Optional foot switch. Made in the USA.

• Front side loading
• Powerful jogging action
• Quiet operation
• 2 sizes: Standard (8.5"x11") and Large (11" x 17")

> Learn More

The Challenge Handy Jog is a low cost, highly effective jogger. With a small footprint, the Handy Jog can be placed beside any machine. Optional foot switch. Made in the USA.

• Front side loading
• Powerful jogging action
• Quiet operation
• 2 sizes: Standard (8.5"x11") and Large (11" x 17") > Learn More