Shop finishing equipment at Print & Finishing Solutions.

Programmable cutter with automatic clamp, power back gauge, and digital touchpad.

• Memory key for repeat cuts
• Automatic SET function for reference measurement and EJECT function for pushing out paper
• Self-diagnostic system with error indication on display > Learn More

Fully automatic cutter with electric blade drive, automatic clamp, and EASY CUT blade activation.

• Front table digital display (cm or inches) for precise back gauge positioning
• Bright, LED optical cutting line
• Adjustable back gauge with narrow separations and plastic gliders > Learn More

The MBM AeroDieCut is a die cutter with a twist. The fun twist is the fact that it’s the first Die Cutter that can safely use existing traditional platen dies so there is no need to have new expensive steel dies made - plus it can cut, crease, perforate, and emboss in a single pass.

• Small die adapter chase included
• Patented Tri-suction feeding
• Multi-up ability: up to 5 times per sheet
• 4.3” colored touch screen
> Learn More

Dependable automatic folder that comes pre-programmed with 18 standard folds. Up to 12 custom jobs can be stored in memory.

• Features automatic folding position setting
• Folding patterns can be stored and recalled via touch screen
• Fastest folding speed in its class > Learn More

Eliminate time-consuming, costly hand feeding and trimming in laminating with the new value priced ALM3230 lamination system!

• Small Foot Print – less than 4 sq. ft.
• 115 Volt, 15 amp service
• Ultra quick warm up < 5 minutes
• Sheets sizes: 13”x19”, 12”x18”, 11”x17”, 8.5”x11”
• Laminates copy paper up to 100lb

> Learn More

The newest, commercial-grade Fujipla laminator by
Dry-Lam has everything you know and love about the
previous ALM line for automatic feeding, laminating,
trimming, and stacking sheets, but is now faster
and better with improved features and functionality!
Laminating up to 68” per minute, it is 25% faster than
the ALM3230.

• Ultra-quick warm-up time
• Automatic single or double-sided lamination
• Hands-free automatic feed tray > Learn More

Introducing the all new QTopic-380 print on-demand single-sided lamination system. Sleeking option is pre-loaded and included. Spot coat gloss, matte, holographics and sleeking foils with this low cost laminator.

• Maximum sheet size capabilities up to 15”W x 48”L
• Pneumatic chrome lamination roller sets
• Adjustable de-curling system
• Rear burst roller ensures excellent results. > Learn More

The Tamerica TCC-1655 HC is a comprehensive hot & cold roll laminator that caters to a variety of laminating requirements. It efficiently laminates materials ranging from 1.5 to 10 mil thickness at a rate of up to 10 feet per minute and can manage items as wide as 65 inches.

• Take up bar for cold lamination
• 1”. 2.25” and 3” Core Size
• Run / Stop switch w/ reverse function > Learn More

The Tamerica TCC-1200HC is a versatile hot & cold roll laminator that accommodates a range of laminating needs. It can laminate materials from 1.5 to 10 mil thick at a speed of 8.8 feet per minute and can handle items up to 45 inches wide.

• 45” Laminating Width
• Mounts up to 1/2”
• Take up bar for cold lamination > Learn More

• Shred Volume: 5 gal. (3/4 for plastic)
• Dimensions (D x W x H): 8 3/4 x 13 1/2 x 21
• Sheet Capacity: 10-12
• Feed Opening: 8 3/4"
• Electrical Requirements: 115 volts
• Horsepower: 1/5 " > Learn More

• Shred Volume: 5 gal. (3/4 for plastic)
• Dimensions (D x W x H): 8 3/4 x 13 1/2 x 21
• Sheet Capacity: 5-6
• Feed Opening: 8 3/4"
• Electrical Requirements: 115 volts
• Horsepower: 1/5 > Learn More

• Shred Volume: 9 gal.
• Dimensions (D x W x H): 11 3/4 x 15 1/2 x 25
• Sheet Capacity: 13-15
• Feed Opening: 9 1/2 Inch
• Electrical Requirements: 115 volts
• Horsepower: 3/4 > Learn More