Filter Results
- Manufacturer
-
- Graphic Whizard
- CUTWORX
- Micron
- MBM (39)
- Akiles (35)
- Horizon (34)
- Morgana (32)
- Preferred Pack (28)
- Challenge (25)
- FastBind (10)
- Formax (9)
- Rhin-O-Tuff (9)
- JBI (6)
- Vivid Matrix (3)
- Fujipla (2)
- Tamerica (2)
- Mimaki (2)
- Amerilam (1)
- Bauman (1)
- GBC (1)
- Martin Yale (1)
- Perfecta (1)
- Foliant (12)
- Summa (9)
- Graphic finishing partners (7)
- KAMA (2)
- TEC Lighting (2)
- Valiani (2)
- Baum (1)
- Powis (1)
- Lami (1)
Shop finishing equipment at Print & Finishing Solutions.
-
Micron PL-20 Semi-Automatic Pneumatic Eyelet
GM-MSC-PL20
The PL-20 Machine is a portable fastener attaching machine that has one hopper to accommodate the grommets to be automatically fed through its unique channeling mechanism built to a standard size.
This machine also has a side pocket slot that receives the washers for safely installing your grommets with washers. As it is built to install only one size grommets, this machine can be built to accommodate installation from 1.7 to 3 grommets.
• Installs eyelets in a range of materials
• Manual fill button to automatically turn hopper brushes
• Can built to accommodate self-piercing grommets ranting from #1.7 to #3 > Learn MoreUS$2,835.95 -
Micron MC-20 1-Cylinder Fastening Attaching Machine
GM-MSC-MC20_1
The Micron MC-20 Single Cylinder Pneumatic Fastener Attaching Machine is an affordable, adaptable device with replaceable dies for all fastener installations, including grommets/eyelets up to size #5 (5/8" ID), rivets, jean buttons, and snaps.
• This machine can accommodate dies for snaps, rivets and buttons
• Features a laser pointer, optional foot pedal and comes standard with safety system
• Optional hand and foot pedal operations > Learn MoreUS$1,950.00 -
Micron MC-20 2-Cylinder Fastening Attaching Machine
GM-MSC-MC20_2
The Micron MC-20 Single Cylinder Pneumatic Fastener Attaching Machine is an affordable, adaptable device with replaceable dies for all fastener installations, including grommets/eyelets up to size #5 (5/8" ID), rivets, jean buttons, and snaps.
• This machine can accommodate dies for snaps, rivets and buttons
• Features a laser pointer, optional foot pedal and comes standard with safety system
• Optional hand and foot pedal operations > Learn MoreUS$2,650.00 -
Micron M-500 Fully Automatic Fastening Attaching Machine
GM-MSC-M500
Simple set-up and quick actuating action makes the M-500 Fastener Attaching Machine the most popular machine for mass production.
• Fully automatic, self-loading machine. Fed by hoppers.
• Punches a hole and sets the grommet in one step.
• Foot pedal for hand safety. > Learn MoreUS$8,995.00 -
Micron MH-5 Hydraulic One Shot Large Size Attaching Machine
GM-MSC-MH5
The Micron MH-5 "One-Shot" Heavy Duty Hydraulic Fastener Attaching Machine is ideal for attaching rolled-rim, self-piercing, and larger sheet metal curtain or oval grommets.
• 90% reduction in production time
• Simple control allows for user-friendly attributes
• Foot pedal and push button installation > Learn MoreUS$5,995.00 -
Multi Automatic Creaser
GM-GWH-PT335B• Speed: 4500 SPH (Based on 8.5" x 11"run landscape, 1 crease)
• Maximum stock size: 13" x 25.5"
• Max # Crease Positions: 32
• Feeder: 4" Airfed vacuum pile feeder > Learn More -
GW Automatic Creaser Folding System
GM-GWH-PT335AFKThe GW PT335 AKF folds, creases up/down and cross perfs all in one machine. It features a 4" vacuum pile feeder, auto sheet measurement, a 6" color touchscreen and has 6 different interchangeable creasing/perfing dies.
• Speed: 6,500 sheets/hr
• Folds paper from 150 to 350 gsm
• Crease or perf up to 35" long sheets into one bypass
• Self-adjusting automated smart delivery
> Learn More -
GW PT33LSC Automated Laminator
GM-GWH-PT33LSCLaminate, slit and cut with the GW PT 33LSC. Designed for the digital short-run printer, the PT 33LSC cuts to bleed as well as has variable size encapsulation mode.
• Slits and cuts to size
• Film choices of gloss, matte, soft touch and more
• Pouch mode with variable encapsulation size
• Anti-curl device
> Learn More -
Cutworx FL13 Laminator & Foiler
GM-CWT-FL13If you are looking for a professional foiler and laminator that can handle most printed media up to 13 inches, the Cutworx FL13 is the perfect choice. It is designed for print shops that want to offer fast and efficient foiling or laminating for small batches.
• Hot roller technology
• Speed and temperature control
• Laminates top hot > Learn More -
Flexa Easy Lite Air Heat Assisted Top Roller Laminator
GM-CWT-FLX_AIRIntroducing the Flexa Easy Lite Air: a professional heat-assisted top roller laminator specifically engineered for self-adhesive materials. This innovative device not only laminates but also facilitates mounting with ease. Crafted entirely in Italy, it epitomizes quality and precision in design and manufacturing.
• Cost-Effective
• Working Flexibility
• Easy to Use Control Panel > Learn More -
Flexa Easy Lite Heat Assisted Laminator w/WiFi
GM-CWT-FLX_WIFIThe Flexa Easy Lite is a heat assisted laminator for wide-format media that has built-in Wi-Fi/LAN. You can use your PC or mobile devices to remotely monitor the machine data and working parameters. The software has a modern graphic design that lets you easily use the many new functions, such as saving three different processes, measuring the laminated meters, setting the automatic shutdown, scheduling the switch on and off times and more.
• Remote monitoring
• Easy to use
• No material waste > Learn More -
Express Heat-Assisted Laminator
GM-CWT-EXPA high-grade top roller laminator designed specifically for self-adhesive materials, featuring heat assistance. This versatile device enables laminating, mounting, and encapsulating with precision. Engineered for reliability and user-friendliness, it ensures flawless, high-quality results every time.
• Adjustable Laminating Pressure
• Foot Pedal For Hands Free Operation
• Photosensitive Safety Cells > Learn More