FAQs

Should I choose a CET hybrid printer or a CET flatbed?

Choose a hybrid for mixed roll and rigid work on one platform. A flatbed is the better fit when board registration, double-sided alignment, nested sheets, and repeatable positioning matter more than roll-media flexibility.

What materials can CET hybrid wide format printers handle?

CET hybrid systems print flexible media and rigid substrates up to 2 inches thick. Common applications include vinyl, banner, foam board, acrylic, PVC, corrugated plastic, and display board. Test adhesion before running low-surface-energy or coated materials.

What is the difference between CET Q6 and K2 printhead configurations?

Q6 configurations use Ricoh Gen6 heads with 1,280 nozzles and 5, 10, or 15 picoliter drops. K2 configurations use Kyocera heads with 2,656 nozzles and 4, 6, or 10 picoliter drops for higher-volume production.

Which CET print width fits standard board production?

The 98-inch class fits common 4-by-8-foot sheets. The 126-inch class handles 5-by-10-foot boards and wider roll work, while a 63-inch hybrid suits narrower media and tighter floor-space limits.

Can a CET printer run white ink and clear varnish?

White and clear configurations vary by model and printhead arrangement. Before specifying ink channels, determine whether the work requires white underprint, white overprint, flood white, spot clear, or simultaneous color, white, and varnish.

Are CET wide format printers field-upgradeable?

Many CET hybrid and flatbed configurations can accept more printheads in the field. Plan the initial carriage, ink channels, and row configuration around the expected upgrade path, since hardware requirements and production interruptions vary by model.

How should a shop evaluate advertised square-feet-per-hour ratings?

Compare speed using the print mode, pass count, ink configuration, and image quality required for saleable work. White ink, varnish, bidirectional settings, media handling, loading time, and finishing all affect output over a full production shift.

When does an autoloader make sense for a CET printer?

Automated loading and unloading make sense when steady board volume keeps the printer occupied and manual handling restricts output. Check sheet size, substrate weight, job batching, staffing, and downstream cutting capacity before adding automation.

What service planning is required before installing a CET wide format printer?

Before installation, confirm electrical service, compressed air, ventilation, environmental control, access clearance, RIP workflow, operator training, ink storage, and preventive maintenance. Print & Finishing Solutions provides installation and field service across its Western U.S. territory.

This table is optimized to answer which CET printer class fits a shop’s substrate mix, board size, printhead preference, and production volume.