Privacy Policy Cookie Policy Terms and Conditions
  • 3/32 HEX WRENCH

    3/32 HEX WRENCH

    GP-CMC-W_154
    Challenge Part#: W-154
    US$3.15
  • Challenge Titan 230TC Paper Cutter

    Challenge Titan 230TC Paper Cutter

    GM-CMC-TITAN230TC

    Titan 230 is built on a foundation of sold cast iron and steel. It meets the toughest safety standards in the industry today. UL and CE Certified. Made in the USA.

    • 10.5" Color Touch Screen control panel
    • Electronic Clamp Pressure control
    • Repeat and Loop commands streamline program entry
    • Auto-programming features of sheet division and label cutting with animated graphics
  • 4 X 1-3/4 TAPER PINS

    4 X 1-3/4 TAPER PINS

    GP-CMC-H_6633_414
    Challenge Part#: H-6633-414
    US$4.95
  • 4-40X3/4 SOC HD CAPSCREW

    4-40X3/4 SOC HD CAPSCREW

    GP-CMC-H_6918_44006
    Challenge Part#: H-6918-44006
    US$1.00
  • 4-40X1/4 FIL HD MACH SCR

    4-40X1/4 FIL HD MACH SCR

    GP-CMC-H_6921_44004
    Challenge Part#: H-6921-44004
    US$1.00
  • 4-40X1/2 RND HD MACH SCR

    4-40X1/2 RND HD MACH SCR

    GP-CMC-H_6923_44008
    Challenge Part#: H-6923-44008
    US$1.00
  • 4-40X5/8 RND HD MACH SCR

    4-40X5/8 RND HD MACH SCR

    GP-CMC-H_6923_44010
    Challenge Part#: H-6923-44010
    US$1.00
  • 4-40X3/4 RND HD MACH SCR

    4-40X3/4 RND HD MACH SCR

    GP-CMC-H_6923_44012
    Challenge Part#: H-6923-44012
    US$1.00
  • 4" WOOD BLOCK

    4" WOOD BLOCK

    GP-CMC-K_54_3
    Challenge Part#: K-54-3
    US$6.66
  • 4MM OD POLYETHYLENE TUBING

    4MM OD POLYETHYLENE TUBING

    GP-CMC-P_303_3
    Challenge Part#: P-303-3
    US$2.15
  • Challenge Titan 265TC Paper Cutter

    Challenge Titan 265TC Paper Cutter

    GM-CMC-TITAN265TC

    The Titan 265 is based on a solid cast iron and steel construction for maximum durability. Industry-exclusive UHMW gib surfaces, composite bushings, and a one-inch thick solid metal table require virtually zero maintenance for years of trouble-free operation.

    • 10.5" Color Touch Screen control panel
    • Programmable Clamp pressure per cut
    • Low-pressure pre-clamping
    • JDF and network capable hardware
  • 5/32" COMPRESSION NUT

    5/32" COMPRESSION NUT

    GP-CMC-0S8_B_1095
    Challenge Part#: 0S8-B-1095
    US$6.90

Challenge

Per Page

4863 Results

To top