-
Powerful 3-Head Hydraulic Operation drill with fast and easy adjustments.
- 2-1/2" Drilling Capacity
- Fast and Easy Head Adjustments
- Automatic Drill Return
- Auto-Trip Side Guide (optional) -
The Challenge Champion 305 continues the company's well known excellence for innovation, reliability and durability. The industry workhorse for over thirty years. Powerful, accurate, hydraulic clamping and cutting with a 30 1/2" cut width and 4" clamp opening.
• Up to 26 cuts per minute
• Virtually maintenance-free design
• 30.5" / 77.5 cm cutting width, 4" / 10.2 cm clamp opening -
The Challenge Champion 370 continues the company's well known excellence for innovation, reliability and durability. The industry workhorse for over thirty years. Powerful, accurate, hydraulic clamping and cutting with a 37" cut width and 5 1/8" clamp opening.
• Up to 24 cuts per minute
• Virtually maintenance-free design
• 37" cutting width, 5 1/8" clamp opening
• Hydraulic clamping & cutting -
Proudly manufactured in Michigan, USA, the CHAMP 185 series delivers hydraulic powered strength and durability with easy to use controls to the 18” cutter market that is crowded with weaker electric motor powered machines. The CHAMP's strong ¼” thick cold rolled steel weldment frame offers a superior design allowing operators to cut today's hard stocks accurately in piles of up to 3.25” high.
• Adjustable angle 7.1” color touch screen controller
• Micro adjustment backgauge with hand knob
• Repeat and loop commands to simply program repetitive cut sequences
• Instant job generation from cuts history (cut-and-record) -
The ultimate book trimming solution necessary to be competitive, the Challenge CMT 130TC book trimmer is built from steel and cast-iron. The system can be configured as a hand-feed off-line trimmer for entry level cost-effective book finishing. Made in the USA.
• Powerful hydraulic cutting and clamping pressure
• Cuts up to 2” book
• 10.5” color touch screen display
• Easy to operate -
The new Challenge CMT 330TC has expanded capability to finish cut LANDSCAPE FORMATTED BOOKS up to 12.1” tall by 12.9” wide and down to 5.875” tall by 3.937” wide. Made in the USA.
• Powerful hydraulic cutting and clamping pressure
• Cuts up to 2” book
• 10.5” color touch screen display
• Easy to operate
-
The Challenge hydraulic powered Single Cornering Machine delivers up to ten times more cornering capacity than electric powered table-top models in the market.
• 6 Sizes of Cornering Blades
• Handles Any Size Sheet
• 4" Lift Capacity
• Precise Cutting Action
• Gravity Chip Disposal -
Incredibly helpful for the busy print shop. Shipped in one piece, the Handy Cart is constructed of heavy gauge, welded steel. Made in the USA.
• Holds 4 piles of 11"x17" stock up to 21" tall
• 500lbs Total Capacity
• Portable- Four 5" swivel casters for easy rolling
• Full size lower shelf with lip -
Handy Drill with 2-1/2” lift capacity. Machine can be converted to a 2” maximum lift capacity for a wider range of available hole sizes (1/8” to 1/2").
• Safety features
• Conveniently located chip collector cups
• Adjustable backgauge stops
• 4 different drill bit sizes (1/4”, 5/16”, 3/8”, 1/2") -
The Challenge Handy Jog is a low cost, highly effective jogger. With a small footprint, the Handy Jog can be placed beside any machine. Optional foot switch. Made in the USA.
• Front side loading
• Powerful jogging action
• Quiet operation
• 2 sizes: Standard (8.5"x11") and Large (11" x 17")
-
The Challenge Handy Jog is a low cost, highly effective jogger. With a small footprint, the Handy Jog can be placed beside any machine. Optional foot switch. Made in the USA.
• Front side loading
• Powerful jogging action
• Quiet operation
• 2 sizes: Standard (8.5"x11") and Large (11" x 17")
