Operating at speeds up to 6000 sheets per hour, the “6000” makes fast and easy work of finishing needs.

• Feed sets unglued or glued side
• Accurate .010″ register
• 1 number per head per sheet > Learn More

The Preferred Pack CT-50-BHO light duty carton sealer is simple to use. The machine applies a 2 inch tape strip to the bottom of the carton. The CT-50-BHO can be easily adjusted in only seconds to process a different size carton. Excellent for low profile, small, lightweight boxes.

• 2 Side Drive Belts - Positive Feed
• Heavy Duty Locking Casters
• Fully Adjustable Legs
• In-feed Conveyor
• Exit Conveyor > Learn More

The Preferred Pack CT50 light duty carton sealer is simple to use. Semi-automatic sealer with side drive belts for positive feed and side pressure rollers to close box top. Excellent for low profile, small, lightweight boxes.

• “Piranha” Tape Head with “Easy Thread”
• Interchangeable Tape Heads
• Fully Adjustable Legs
• Min/Max box height: 5" to 20"
• Min/Max box width: 4.7" to 20" > Learn More

• Package Width: 1.2" - 18". Height: 7.5"
• PCB with keyboard
• Uses paper or plastic tape. 30mm
• Tape length: 500 ft rolls
• Speed: up to 26 PPM
• Power:110 volt > Learn More

• Package Width 1.5"- 9.5". Height: 1/4" - 5.5"
• Uses 20, 30 or 40mm wide paper/plastic tape
• Tape Length: 500 ft rolls
• Speed: 20-25PPM
• Power: 110 volt, 50/60Hz 1 Phase"
• In Stock
> Learn More

• Package Width: 1.5" - 9.5". Height: 1/4" - 5.5"
• Uses 20, 30 or 40mm wide paper/plastic tape
• Tape length: 2000 ft rolls
• Speed: 20-25 PPM
• Power: 110 volt, 50/60Hz 1 Phase
• In Stock
> Learn More

• Package Width: 1.2" - 15.7". Height: 7.5"
• PLC with touchscreen
• Uses paper or plastic tape. 50mm
• Tape Length: 500 ft rolls
• Speed: up to 30 PPM
• Power 110 volt > Learn More

The PT 331SCC slits, cuts, creases or perfs in a single pass. Full or partial cross perforate up to 32 creases/perfs with registration mark cut compensation. Slitting formats are easily changeable without the need of replacing cartridges

• 150-350 gsm
• Interchangeable crease / perf dies
• Preset programs for quick job changeover
• Manual cut/crease input for customized jobs > Learn More

The new PT 335SCC Multi is a complete full-bleed finishing system to fit the digital marketplace. Equipped with interchangeable creasing/ perfing dies the PT 335SCC Multi can quickly switch over from perfing to creasing while preventing digital toner cracking. Strike perf capabilities means that the PT 335SCC Multi can now do partial perfs in both directions for “T” or “box” perfs.

• 4" deep pile feeder
• Multi Accessory Output
• 9" color touchscreen > Learn More

The corner rounder from Graphic Whizard rounds up to 600 sheets of paper. Utilizing seven available dies on a built-in rotary carousel, jobs are quick and easy. Comes with optional floor stand.

• 2 button operation or heavy duty foot pedal
• Built-in scrap drawer for easy waste removal
• Built-in die carousel with 7 different radius'
• Single die system with high grade cut stick bottom


> Learn More

The operator simply opens up and squares a flat box, loads it into the pack station, uses the kick plate to fold minor flap and activate the bottom flap folder. The operator then presses the green switch and 2 of the bottom flaps are opened allowing for the next box to be fed into the machine. The operator then fills the box, and when once filled, the operator closes the minor and major flaps and pushes the box into the carton sealer.

• Saves time and labor costs to close bottom flaps before loading
• Folding size: L 250-500mm (10-20”)
• Folding size: W 200-400mm (8-16”)
• Folding size: H 100-500 mm (4-20”)
• Air: 1 CFM at 60 PSI
• Box Height:4 to 19.6 max Inch


> Learn More

Two machines built on the same frame. This is Preferred Packaging's Best Seller with Automatic Product Adjustment.

• Combination fully automatic L’ Sealer and tunnel
• Easy load film cradle
• Fully enclosed safety doors
• Easy access control panel
• Self diagnosing Delta PLC
> Learn More