The Aerocut Velocity slitter/cutter/creaser features enhanced productivity and user- friendliness. Patented “Tri-Suction Feeding Mechanism” reduces risks of double feeds and mis-feeds. Creasing pressure can be adjusted in 5 levels instantly by shifting the lever.

• Sheet Capacity: 4” (vs. Classic Capacity: 2 ¼”)
• Speed: 20 sheets/min (vs. Classic Speed: 12 sheets)
• New Lytrod Intellicut software included
• Paper Size: 8. ¼” x 8. ¼” – 14½”x 47”+ (vs. Classic: 8 ¼” x 8 ¼” – 14 3/8” x 20 ½”+) > Learn More

The HT-300 Three-side Trimmer features a fully automated setup with color touchscreen control. The system offers higher productivity, unique corner cut capability, optional flap cover trimming, and it’s automated setup can be barcode driven.

• Over 35% faster than previous models
• Processes up to 300 books/stacks/hr
• 4 books/stack x 300 = 1,200 bph > Learn More

The FD 262 tabs up to 12,000 pieces per hour (8 1/2” tri-folds), and handles media up to 17” wide, up to 5/32” thick.

• Up to 12,000 pieces/hr
• Feeder holds up to 200 tri-folds
• Uses a variety of tab stocks
• Integrated bottom feed
• 5-digit LCD counter
• Tab density adjustment > Learn More

The FD 282 Double-Head Edge Tabbing System features revolutionary advances in tabber design.

• Tabs up to 25,000 pieces/hr
• In-line design
• Uses a variety of tab stocks
• Digital counter with LCD display
• Applies tabs on opposite sites, simultaneously > Learn More

The Horizon HT-80 is an in-line or off-line three-knife trimmer that produces precise, clean cuts with no rough edges.

• Cycle speed up to 1,000 books/hr
• Variable production
• Advanced automation
• Precision Trimming
> Learn More

AEROCUT NANO is the card cutter that can take up to 350gsm stock. It feeds, slits and cross cuts to finish prints into business cards, post cards, flyers and more.

• Intuitive touch screen display
• Stable air suction feed system
• 16 pre-programmed jobs and 40 customized jobs
• Paper weight - 120-350 gsm, depending on paper quality > Learn More

The PT 331SCC slits, cuts, creases or perfs in a single pass. Full or partial cross perforate up to 32 creases/perfs with registration mark cut compensation. Slitting formats are easily changeable without the need of replacing cartridges

• 150-350 gsm
• Interchangeable crease / perf dies
• Preset programs for quick job changeover
• Manual cut/crease input for customized jobs > Learn More

The new PT 335SCC Multi is a complete full-bleed finishing system to fit the digital marketplace. Equipped with interchangeable creasing/ perfing dies the PT 335SCC Multi can quickly switch over from perfing to creasing while preventing digital toner cracking. Strike perf capabilities means that the PT 335SCC Multi can now do partial perfs in both directions for “T” or “box” perfs.

• 4" deep pile feeder
• Multi Accessory Output
• 9" color touchscreen > Learn More

The Aerocut X is the basic slitter/cutter/creaser. This is the refined model of the original AeroCut launched in 2010, featuring enhanced productivity and user-friendliness.

• Intuitive operation with 7" touch screen
• Flex mode allows for multiple size cards from one page
• Tri-suction feeding mechanism
• Robust slitters and guillotine to cut 400gsm stock
• Lytrod Intellicut software included
> Learn More

The new Horizon HT-1000V Variable Three-Knife Trimmer operates in-line with Horizon perfect binders or off-line to deliver a wide range of input and output sizes for completely variable production.

• Heavy duty construction
• Consistent high quality finishing
• Hands free set up
• Variable production
> Learn More

The Aerocut Prime is an ideal solution for finishing, especially for short-run digitally printed applications, such as business cards, post cards, invitations, greeting cards, leaflets, tickets and more. It features 2 single blade slitters to trim top & bottom margins, and 2 double blade slitters for center gutters and precise accuracy. The durable blades cut stocks up to 400 gsm.

• Sheet Capacity: 4”
• Paper Size: 8.27” x 8.27” – 14.5” x 47”+
• Speed: 24 sheets/min
• New Lytrod Intellicut software included
• 15,120 business cards/hr / 6,720 post cards/hr / 1,260 folding leaflet/hr > Learn More

The Aerocut X Pro is the top-end slitter/cutter/creaser featuring state-of-the-art technologies. It is designed, built and calibrated with Japanese engineering and craftmanship at its best.

• 20% faster (34 sheets/min)
• Intuitive operation with 10" touch screen
• Creases 4,080 sheets/hr.
• Stacking capacity is 3.9"
• Lytrod Software included


> Learn More