Manufacturer

127 Results

Per Page
  • Pick Punch Stack. HD7700+PAL-M+APES

    Code: GM-PDI-HD7700_3IN1
    HD7700 heavy duty 14” punch (up to 55 sheets / cycle) PAL-M (manual) or PAL-14 (automated) pick module APES-14 automated paper ejector / stacker module
    Punch at the production of an automated system for less than half the cost.
    Comb - Wire - Coil - 3 Hole - Custom Dies Available > Learn More
    US$POA
  • Rhin-O-Tuff HD 7700 Onyx Ultima

    Code: GM-PDI-HD7700ONYX

    The HD7700 Ultima is the top of the line heavy duty durable Table Top Punch that has no equal.

    •14” (356 mm) open ended extra capacity die
    •Punch capacity: 55 sheets or 110 pages
    •Holds up to 150% more waste
    •Automatic and Manual Reverse > Learn More
    US$POA
  • Rhino-O-Tuff Onyx HD8000 14" Wire Closer

    Code: GM-PDI-HD8000ONX

    The HD8000 is a wire closing machine.

    •14" legal size capacity
    •Closes books from 3/16 inch to 1-1/4 inch thick
    •Fast and accurate
    •Significant savings on wire costs > Learn More
    US$POA
  • Rhin-O-Tuff Onyx PAL-M

    Code: GM-PDI-PALM_ONYX

    The PAL-M is a manual paper separator. The PAL-M is used to optimize the amount of paper to be inserted into the paper punch, not too much and not too little.

    • Variable Paper Lift Thickness
    • 3 Year Warranty > Learn More
    US$POA
  • PDI 14" Onyx Electric Paper Lifter

    Code: PM-PDI-PAL_14ONYX
    US$POA
  • US$POA
  • Slitter/Cutter Creaser System

    Code: GM-GWH-PT331SCC

    The PT 331SCC slits, cuts, creases or perfs in a single pass. Full or partial cross perforate up to 32 creases/perfs with registration mark cut compensation. Slitting formats are easily changeable without the need of replacing cartridges

    • 150-350 gsm
    • Interchangeable crease / perf dies
    • Preset programs for quick job changeover
    • Manual cut/crease input for customized jobs > Learn More
    US$POA
  • Multi Siltter Cutter Creaser

    Code: GM-GWH-PT335SCC

    The new PT 335SCC Multi is a complete full-bleed finishing system to fit the digital marketplace. Equipped with interchangeable creasing/ perfing dies the PT 335SCC Multi can quickly switch over from perfing to creasing while preventing digital toner cracking. Strike perf capabilities means that the PT 335SCC Multi can now do partial perfs in both directions for “T” or “box” perfs.

    • 4" deep pile feeder
    • Multi Accessory Output
    • 9" color touchscreen > Learn More
    US$POA
  • Horizon SmartStacker

    Code: GM-HOR-SMARTSTACKER

    The Horizon SmartStacker converts a B2 size (20″ x 29″) sheet into up to 28 individual cut sheets with intelligent accumulation, stacking, and end-to-end JDF control.

    • Designed to run in-line with HP Indigo 10000/12000 Press
    • Can operate near-line to serve multiple print sources
    • Sheet feeding capability: 4,500 sheets/hr > Learn More
    US$POA
  • Horizon SMSL-100 SmartSlitter

    Code: GM-HOR-SMSL100

    The Horizon SmartSlitter is an all-in-one smart sheet processing system that can slit, gutter cut, edge trim, cross-cut, perforate, and crease all in one pass.

    • Paper sizes: 5.5” x 7.6” – 14” x 20”
    • 20 creasing lines
    • Positive and negative in one pass
    • Production: 54 sheets/min.
    • Standard business cards: 21-up > Learn More
    US$POA
  • Aerocut Prime Complete

    Code: GM-MBM-AEROCUTPRIME

    The Aerocut Prime is an ideal solution for finishing, especially for short-run digitally printed applications, such as business cards, post cards, invitations, greeting cards, leaflets, tickets and more. It features 2 single blade slitters to trim top & bottom margins, and 2 double blade slitters for center gutters and precise accuracy. The durable blades cut stocks up to 400 gsm.

    • Sheet Capacity: 4”
    • Paper Size: 8.27” x 8.27” – 14.5” x 47”+
    • Speed: 24 sheets/min
    • New Lytrod Intellicut software included
    • 15,120 business cards/hr / 6,720 post cards/hr / 1,260 folding leaflet/hr > Learn More
    US$POA
  • Aerocut Velocity Air Feed Slitter / Cutter / Creaser

    Code: GM-MBM-AEROCUTVELO

    The Aerocut Velocity slitter/cutter/creaser features enhanced productivity and user- friendliness. Patented “Tri-Suction Feeding Mechanism” reduces risks of double feeds and mis-feeds. Creasing pressure can be adjusted in 5 levels instantly by shifting the lever.

    • Sheet Capacity: 4” (vs. Classic Capacity: 2 ¼”)
    • Speed: 20 sheets/min (vs. Classic Speed: 12 sheets)
    • New Lytrod Intellicut software included
    • Paper Size: 8. ¼” x 8. ¼” – 14½”x 47”+ (vs. Classic: 8 ¼” x 8 ¼” – 14 3/8” x 20 ½”+) > Learn More
    US$POA
To top