Quality laminators & foiling available online at Print & Finishing Solutions.
-
GW PT33LSC Automated Laminator
GM-GWH-PT33LSCLaminate, slit and cut with the GW PT 33LSC. Designed for the digital short-run printer, the PT 33LSC cuts to bleed as well as has variable size encapsulation mode.
• Slits and cuts to size
• Film choices of gloss, matte, soft touch and more
• Pouch mode with variable encapsulation size
• Anti-curl device
> Learn More -
GMP Q-Topic 380 Laminator
GM-AME-QTOPIC380
Introducing the all new QTopic-380 print on-demand single-sided lamination system. Sleeking option is pre-loaded and included. Spot coat gloss, matte, holographics and sleeking foils with this low cost laminator.
• Maximum sheet size capabilities up to 15”W x 48”L
• Pneumatic chrome lamination roller sets
• Adjustable de-curling system
• Rear burst roller ensures excellent results. > Learn More -
Matrix 370 Pneumatic Laminator
GM-VLT-MX370P
The Matrix MX-370P SRA3 Pneumatic single-sided laminating, digital foiling and special effects system. Create eye-catching finishes using foil and special effects with the pneumatic option, achievable with adjustable pressure rollers.
• Semi-automatic feed
• Pneumatic pressure
• Anti-curl technology
• Automatic separator
• Multifunctional - laminate, foil & create spot UV-style effects > Learn More -
Matrix 530 Duplex Pneumatic Laminator
GM-VLT-MX530DP
Winner of Quick Printing Readers’ Choice Top Products Awards, the Matrix Duplex is an incredibly cost-effective system that allows printers to laminate single-side, double-side and encapsulate their work, in-house.
• Semi-automatic feed
• Pneumatic pressure
• Multifunctional - laminate, foil & create spot UV-style effects > Learn More -
Matrix Omni-Flow 330 (SRA3) Deep Pile Feeder
GM-CWT-OMNI330The Matrix Omni-Flow Deep Pile Feeder is a modular system that is designed to be simple to install, configure and operate. The feeder can be retro-fitted to any Matrix Pneumatic or Matrix Duplex model.
• Retrofits all Matrix pneumatic and duplex models
• Quick and easy set-up and operation
• Fully automatic lamination and foiling
• Change between paper stocks in seconds > Learn More -
Tamerica TCC-1655 HC 65" Hot & Cold Laminator
GM-TPI-TCC1655HC
The Tamerica TCC-1655 HC is a comprehensive hot & cold roll laminator that caters to a variety of laminating requirements. It efficiently laminates materials ranging from 1.5 to 10 mil thickness at a rate of up to 10 feet per minute and can manage items as wide as 65 inches.
• Take up bar for cold lamination
• 1”. 2.25” and 3” Core Size
• Run / Stop switch w/ reverse function > Learn More -
Tamerica TCC-1200 HC 45" Hot & Cold Laminator
GM-TPI-TCC1200HC
The Tamerica TCC-1200HC is a versatile hot & cold roll laminator that accommodates a range of laminating needs. It can laminate materials from 1.5 to 10 mil thick at a speed of 8.8 feet per minute and can handle items up to 45 inches wide.
• 45” Laminating Width
• Mounts up to 1/2”
• Take up bar for cold lamination > Learn More