Filter Results
- Manufacturer
-
- Akiles
- Preferred Pack
- Graphic Whizard
- CUTWORX
- MBM (39)
- Horizon (34)
- Morgana (32)
- Challenge (25)
- FastBind (10)
- Formax (9)
- Rhin-O-Tuff (9)
- JBI (6)
- Vivid Matrix (3)
- Fujipla (2)
- Tamerica (2)
- Mimaki (2)
- Amerilam (1)
- Bauman (1)
- GBC (1)
- Martin Yale (1)
- Perfecta (1)
- Foliant (12)
- Summa (9)
- Graphic finishing partners (7)
- Micron (7)
- KAMA (2)
- TEC Lighting (2)
- Valiani (2)
- Baum (1)
- Powis (1)
- Lami (1)
Shop finishing equipment at Print & Finishing Solutions.
-
Preferred Pack 1622MK Combo w/Micro Knife
GM-PPS-1622MK_COMBOThis fully adjustable combination L’Sealer with attached Shrink Tunnel includes the latest “Micro-Knife” Technology - No more seal wires to replace.
• Uni-body frame makes this unit easy to move around
• Seal dimension 16 x 22”
• Tunnel dimension 28 x 18 x 8”
• Cycle speed 15 pkgs. per minute" > Learn More -
Combo Fully Automated L'Sealer & Tunnel
GM-PPS-5600COMBOTwo machines built on the same frame. This is Preferred Packaging's Best Seller with Automatic Product Adjustment.
• Combination fully automatic L’ Sealer and tunnel
• Easy load film cradle
• Fully enclosed safety doors
• Easy access control panel
• Self diagnosing Delta PLC
> Learn More -
5300 Combo Fully Automated L'Sealer & Tunnel
GM-PPS-5300COMBOTwo machines built on the same frame. This is Preferred Packaging's Best Seller with Automatic Product Adjustment.
• Combination fully automatic L’ Sealer and tunnel
• Easy load film cradle
• Fully enclosed safety doors
• Easy access control panel
• Self diagnosing Delta PLC
> Learn More -
Akiles CardMac Pro Business Card Slitter
GM-AKI-ACM_PROSave time and money with the Akiles CardMac Pro Business Card Slitter! Quickly create your own custom business cards at a low cost and without leaving the comfort of your home office.
• Full Bleed Cards
• 6 Preset Sizes + Custom Setting
• Single Pass Design > Learn MoreUS$2,999.00 -
GW Slitter Cutter Creaser
GM-GWH-PT331SCCThe PT 331SCC slits, cuts, creases or perfs in a single pass. Full or partial cross perforate up to 32 creases/perfs with registration mark cut compensation. Slitting formats are easily changeable without the need of replacing cartridges
• 150-350 gsm
• Interchangeable crease / perf dies
• Preset programs for quick job changeover
• Manual cut/crease input for customized jobs > Learn More -
GW PT335 Multi Slitter Cutter Creaser
GM-GWH-PT335SCCThe new PT 335SCC Multi is a complete full-bleed finishing system to fit the digital marketplace. Equipped with interchangeable creasing/ perfing dies the PT 335SCC Multi can quickly switch over from perfing to creasing while preventing digital toner cracking. Strike perf capabilities means that the PT 335SCC Multi can now do partial perfs in both directions for “T” or “box” perfs.
• 4" deep pile feeder
• Multi Accessory Output
• 9" color touchscreen > Learn More -
GW PT8336 SCC Auto Feed/Slit Creasing System
GM-GWH-PT8336SCCThe PT 8336SCC Multi is a complete full-bleed finishing system designed for the digital marketplace. Equipped with interchangeable creasing/perfing dies, the PT 8336CC Multi can quickly switch from perfing to creasing to prevent digital toner cracking.
• 4" deep pile feeder
• Multi accessory output
• 9" color touchscreen
• Built in job creator and 64 job program memory
> Learn More -
Tri-Fold Sneeze Guard
GM-AKI-TRIFOLDGUARDCreate safe socially distanced environments at school, the office or at home. Tri-fold Sneeze Guard is made with 3mm crystal clear acrylic that is easy to sanitize and clean.
• Reduce exposure to germs/bacteria
• 3mm crystal clear acrylic
• Folds flat for easy storage
• 22"W x 23"H x 12"D
• Order now--backlog until December > Learn MoreUS$76.00