Filter Results
- Manufacturer
-
- Morgana
- Graphic Whizard
- JBI
- GBC
- Perfecta
- CUTWORX
- MBM (39)
- Akiles (35)
- Horizon (34)
- Preferred Pack (28)
- Challenge (25)
- FastBind (10)
- Formax (9)
- Rhin-O-Tuff (9)
- Vivid Matrix (3)
- Fujipla (2)
- Tamerica (2)
- Mimaki (2)
- Amerilam (1)
- Bauman (1)
- Martin Yale (1)
- Foliant (12)
- Summa (9)
- Graphic finishing partners (7)
- Micron (7)
- KAMA (2)
- TEC Lighting (2)
- Valiani (2)
- Baum (1)
- Powis (1)
- Lami (1)
Shop finishing equipment at Print & Finishing Solutions.
-
EasyPunch Automatic Punch
GM-JBI-EASYPUNCHThe EasyPunch® Automatic Punch is well adapted to finishing operations in the copy center environment. It frees up your staff to handle other tasks while this automatic machine does the punching for them, saving your time and money.
• LCD touch screen interface
• Wide range of punch dies with removable pins
• Easy die change in less than 2 minutes > Learn More -
JBI CB30QS Coil Inserter & Crimper
GM-JBI-CB30QSThe James Burn CB30QS 17" Automatic Coil Inserter and Crimper streamlines your coil binding workflow. This versatile machine effortlessly inserts, cuts, and crimps plastic coils from 8mm to 20mm into pre-punched documents. Expand your capabilities with optional sizes from 6mm to 30mm! Enjoy tool-free setup and user-friendly operation. For maximum efficiency, integrate the CB30QS with an automatic coil forming machine. This compact, low-maintenance workhorse offers the industry's best value in automatic coil insertion and crimping.
• Quick setup, no tools are required for basic setup and operation
• Automatically inserts pre-cut coil lengths into pre-punched books, simultaneously crimps both ends in a single operation
• Comes with 8 to 20mm Crimper Head > Learn More -
Koilmatic Tabletop Coil Inserter & Crimper
GM-JBI-KOILMATIC
The James Burn Koilmatic Automatic Tabletop Coil Inserter is an affordable fully electric tabletop automatic coil inserter and crimper designed with the digital print market in mind. Set up is easy and does not require any tools or shop air to run.
• Paper Size: 8 1/2", 11", A5, & A4 Binding Edges
• Maximum Book Thickness: Up to 5/8" Thick
• Speed: Up to 450 Books per Hour
• Setup Time: Less than 5 Minutes
> Learn More -
-
Apollo XL-165 Substrate Cutter
GM-CWT-165The new Apollo XL can cut materials up to ¾” thick. It cuts
cleanly, accurately, without dust and noise. This is the most
affordable heavy-duty cutter available. Available in 4 sizes.
• 3x Quick change tool cartridges
• Integrated laser sight line
• Counter balance reduces operator fatigue
• Two Quick stops for added lateral support
• 5 year guarantee on all parts except bland and cutting wheels > Learn More -
GW Slitter Cutter Creaser
GM-GWH-PT331SCC
The PT 331SCC slits, cuts, creases or perfs in a single pass. Full or partial cross perforate up to 32 creases/perfs with registration mark cut compensation. Slitting formats are easily changeable without the need of replacing cartridges
• 150-350 gsm
• Interchangeable crease / perf dies
• Preset programs for quick job changeover
• Manual cut/crease input for customized jobs > Learn More -
Morgana AutoCut Pro
GM-MSY-AUTOCUTPRO
The AutoCut Pro delivers the benefits of three functions in one – highly accurate cutting and slitting and high speed creasing in an easy to use system. Link the AutoCut Pro to the Morgana AutoFold for easy cutting, creasing and folding!
• 150 job recall
• Up to 5000 letter sheets per hour when creasing
• 4” Touchscreen operation
• Skew Adjustment > Learn More -
GW PT335 Multi Slitter Cutter Creaser
GM-GWH-PT335SCC
The new PT 335SCC Multi is a complete full-bleed finishing system to fit the digital marketplace. Equipped with interchangeable creasing/ perfing dies the PT 335SCC Multi can quickly switch over from perfing to creasing while preventing digital toner cracking. Strike perf capabilities means that the PT 335SCC Multi can now do partial perfs in both directions for “T” or “box” perfs.
• 4" deep pile feeder
• Multi Accessory Output
• 9" color touchscreen > Learn More -
GW PT8336 SCC Auto Feed/Slit Creasing System
GM-GWH-PT8336SCC
The PT 8336SCC Multi is a complete full-bleed finishing system designed for the digital marketplace. Equipped with interchangeable creasing/perfing dies, the PT 8336CC Multi can quickly switch from perfing to creasing to prevent digital toner cracking.
• 4" deep pile feeder
• Multi accessory output
• 9" color touchscreen
• Built in job creator and 64 job program memory
> Learn More
![](/assets/images/defaults/ajax-loader.gif)