Filter Results
- Manufacturer
-
- MBM
- Akiles
- GBC
- Baum
- Powis
- Horizon (34)
- Morgana (32)
- Preferred Pack (28)
- Challenge (25)
- FastBind (10)
- Graphic Whizard (10)
- Formax (9)
- Rhin-O-Tuff (9)
- JBI (6)
- Vivid Matrix (3)
- Fujipla (2)
- Tamerica (2)
- Mimaki (2)
- Amerilam (1)
- Bauman (1)
- Martin Yale (1)
- Perfecta (1)
- CUTWORX (19)
- Foliant (12)
- Summa (9)
- Graphic finishing partners (7)
- Micron (7)
- KAMA (2)
- TEC Lighting (2)
- Valiani (2)
- Lami (1)
Shop finishing equipment at Print & Finishing Solutions.
-
DestroyIt Paper Shredder 3/16" x 1-1/2" Cross-Cut
SM-MBM-3104CC• Shred Volume: 32 gal
• Dimensions (D x W x H): 18 1/2 x 21 x 36 1/2
• Sheet Capacity: 22-25
• Feed Opening: 12 Inch
• Electrical Requirements: 115 volts
• Horsepower: 1 > Learn MoreUS$2,189.00 -
DestroyIt Shredder Strip-Cut 3/16"
SM-MBM-3104SC• Shred Volume: 32 gal
• Dimensions (D x W x H): 18 1/2 x 21 x 36 1/2
• Sheet Capacity: 22-25
• Feed Opening: 12 Inch
• Electrical Requirements: 115 volts
• Horsepower: 1 > Learn MoreUS$1,895.00 -
DestroyIt Paper Shredder, 1/4"
SM-MBM-3804SC• Shred Volume: 44 gal
• Dimensions (D x W x H): 23 1/4 x 25 1/4 x 38 1/4
• Sheet Capacity: 29-31
• Feed Opening: 16 Inch
• Electrical Requirements: 115 volts
• Horsepower: 1 > Learn MoreUS$2,448.00 -
DestroyIt Paper Shredder, 3/16" x 1-1/2" Cross Cut
SM-MBM-3804CC• Shred Volume: 44 gal
• Dimensions (D x W x H): 23 1/4 x 25 1/4 x 38 1/4
• Sheet Capacity: 24-26
• Feed Opening: 16 Inch
• Electrical Requirements: 115 volts
• Horsepower: 1 > Learn MoreUS$2,737.00 -
DestroyIt Cross-Cut Shredder (3/16" x 1-1/2")
SM-MBM-4002CC• Shred Volume: 44 gal
• Dimensions (D x W x H): 23 1/4 x 25 1/4 x 38 1/4
• Sheet Capacity: 24-26
• Feed Opening: 16 Inch
• Electrical Requirements: 115 volts
• Horsepower: 1 3/4 > Learn MoreUS$3,075.00 -
DestroyIt Straight-Cut Shredder 1/4"
SM-MBM-4002SC• Shred Volume: 44 gal
• Dimensions (D x W x H): 23 1/4 x 25 1/4 x 38 1/4
• Sheet Capacity: 32-35
• Feed Opening: 16 Inch
• Electrical Requirements: 115 volts
• Horsepower: 1 3/4 > Learn MoreUS$2,737.00 -
DestroyIt Paper Shredder 3/16" x 1-1/2" Cross-Cut
SM-MBM-3105CC• Strip Cut approved Level 2 security
• Can shred up to 52 sheets in a single pass
• Automatic start/stop controlled by photo cell
• ECC (Electronic Capacity Control) indicator helps prevent paper jams by indicating sheet capacity levels during the shredding process
• Automatic oil injection ensures optimal performance at all times
• Wide 12" feed opening enables heavier loads > Learn MoreUS$4,971.00 -
DestroyIt Cross-Cut Shredder 3/16 x 1-1/2"
SM-MBM-4005CC• Shred Volume: 44 gal
• Dimensions (D x W x H): 23 1/4 x 25 1/4 x 39 3/4
• Sheet Capacity: 37-39
• Feed Opening: 16 Inch
• Electrical Requirements: 115V and 20amp dedicated line
• Horsepower: 2 1/8 > Learn MoreUS$5,845.00 -
DestroyIt Strip-Cut Shredder 1/4"
SM-MBM-4005SC• Sheet Capacity: 50 - 52
• Shred Speed: 40 ft/min
• Category: Office / Department Shredder
• Feed Opening Size: 16"
• Cut Type & Size: Strip Cut, 1/4"
• Security Level: P - 2 > Learn MoreUS$5,075.00 -
Akiles CardMac Pro Business Card Slitter
GM-AKI-ACM_PROSave time and money with the Akiles CardMac Pro Business Card Slitter! Quickly create your own custom business cards at a low cost and without leaving the comfort of your home office.
• Full Bleed Cards
• 6 Preset Sizes + Custom Setting
• Single Pass Design > Learn MoreUS$2,999.00 -
Aerocut Nano Air feed Slitter and Cutter
GM-MBM-AEROCUTNANO
AEROCUT NANO is the card cutter that can take up to 350gsm stock. It feeds, slits and cross cuts to finish prints into business cards, post cards, flyers and more.
• Intuitive touch screen display
• Stable air suction feed system
• 16 pre-programmed jobs and 40 customized jobs
• Paper weight - 120-350 gsm, depending on paper quality > Learn More -
Aerocut nanoMax Air feed Slitter and Cutter
GM-MBM-AEROCUTNANOMThe MBM AeroCut NanoMax stands out with its quick and easy tool-free slitter position settings, enhanced by four InstaSet Bars and a new Fine Adjustment Knob for precise control. It boasts a user-friendly color touch screen and comes pre-programmed with 31 jobs, while also offering the capacity to store up to 80 additional custom programs, including Flex Mode programs.
• Patented Tri-Suction Feeder
• Intuitive Touch Screen UI
• Versatile InstaSet Bar System > Learn More
![](/assets/images/defaults/ajax-loader.gif)