Shop finishing equipment at Print & Finishing Solutions.
-
Koilmatic Tabletop Coil Inserter & Crimper
GM-JBI-KOILMATIC
The James Burn Koilmatic Automatic Tabletop Coil Inserter is an affordable fully electric tabletop automatic coil inserter and crimper designed with the digital print market in mind. Set up is easy and does not require any tools or shop air to run.
• Paper Size: 8 1/2", 11", A5, & A4 Binding Edges
• Maximum Book Thickness: Up to 5/8" Thick
• Speed: Up to 450 Books per Hour
• Setup Time: Less than 5 Minutes
> Learn More -
-
Excel PreCombo L'Sealer-Compact 110V
GM-PPS-1519ECMC
This compact L’Sealer with Magnetic Hold down and power discharge conveyor with attached Tunnel is only 74 inches in total length. A great machine for low to medium production speeds of 8 to 12 packages per minute.
• Available in 110 volts or 220 volts
• Seal dimension 15 x 19”
• Tunnel dimension 20 x 16 x 6”
• Cycle speed 12 pkgs. per minute > Learn More -
Preferred Pack 1622MK Combo w/Micro Knife
GM-PPS-1622MK_COMBO
This fully adjustable combination L’Sealer with attached Shrink Tunnel includes the latest “Micro-Knife” Technology - No more seal wires to replace.
• Uni-body frame makes this unit easy to move around
• Seal dimension 16 x 22”
• Tunnel dimension 28 x 18 x 8”
• Cycle speed 15 pkgs. per minute" > Learn More -
Combo Fully Automated L'Sealer & Tunnel
GM-PPS-5600COMBO
Two machines built on the same frame. This is Preferred Packaging's Best Seller with Automatic Product Adjustment.
• Combination fully automatic L’ Sealer and tunnel
• Easy load film cradle
• Fully enclosed safety doors
• Easy access control panel
• Self diagnosing Delta PLC
> Learn More -
5300 Combo Fully Automated L'Sealer & Tunnel
GM-PPS-5300COMBO
Two machines built on the same frame. This is Preferred Packaging's Best Seller with Automatic Product Adjustment.
• Combination fully automatic L’ Sealer and tunnel
• Easy load film cradle
• Fully enclosed safety doors
• Easy access control panel
• Self diagnosing Delta PLC
> Learn More -
Horizon SMSL-100 SmartSlitter
GM-HOR-SMSL100
The Horizon SmartSlitter is an all-in-one smart sheet processing system that can slit, gutter cut, edge trim, cross-cut, perforate, and crease all in one pass.
• Paper sizes: 5.5” x 7.6” – 14” x 20”
• 20 creasing lines
• Positive and negative in one pass
• Production: 54 sheets/min.
• Standard business cards: 21-up > Learn More -
Horizon SmartStacker
GM-HOR-SMARTSTACKERThe Horizon SmartStacker converts a B2 size (20″ x 29″) sheet into up to 28 individual cut sheets with intelligent accumulation, stacking, and end-to-end JDF control.
• Designed to run in-line with HP Indigo 10000/12000 Press
• Can operate near-line to serve multiple print sources
• Sheet feeding capability: 4,500 sheets/hr > Learn More
