Shop finishing equipment at Print & Finishing Solutions.

The Horizon HT-110 is an automated three-knife trimmer for off-line or in-line operation with a user-friendly 10.4″ color touchscreen control console.

• Ease-of-use: simple and easy to operate
• Icon-based touchscreen
• High efficiency: speeds up to 1,600 cycles/hr
• 4,000 book/hr - stacks up to 3 books simultaneously > Learn More

The new Horizon HT-1000V Variable Three-Knife Trimmer operates in-line with Horizon perfect binders or off-line to deliver a wide range of input and output sizes for completely variable production.

• Heavy duty construction
• Consistent high quality finishing
• Hands free set up
• Variable production
> Learn More

The Horizon HT-80 is an in-line or off-line three-knife trimmer that produces precise, clean cuts with no rough edges.

• Cycle speed up to 1,000 books/hr
• Variable production
• Advanced automation
• Precision Trimming
> Learn More

The HT-300 Three-side Trimmer features a fully automated setup with color touchscreen control. The system offers higher productivity, unique corner cut capability, optional flap cover trimming, and it’s automated setup can be barcode driven.

• Over 35% faster than previous models
• Processes up to 300 books/stacks/hr
• 4 books/stack x 300 = 1,200 bph > Learn More

The innovative Standard Horizon CABS 6000 perfect binding system is bringing new levels of automation to production bookbinding.

• in-line stacker for stand alone gathering
• Twin milling stations
• Automated in-line cover scoring
• Advanced quality control features

> Learn More

The Horizon SB-09 nine-clamp perfect binder features automated operation, push-button simplicity, and high-quality production perfect binding.

• 10.4" intelligent touch screen control
• Automatic air suction cover feeder
• Handles wide range of materials
• High efficiency
• Up to 4,000 books/hr
• In-line trimmer > Learn More

This compact L’Sealer with Magnetic Hold down and power discharge conveyor with attached Tunnel is only 74 inches in total length. A great machine for low to medium production speeds of 8 to 12 packages per minute.

• Available in 110 volts or 220 volts
• Seal dimension 15 x 19”
• Tunnel dimension 20 x 16 x 6”
• Cycle speed 12 pkgs. per minute > Learn More

This fully adjustable combination L’Sealer with attached Shrink Tunnel includes the latest “Micro-Knife” Technology - No more seal wires to replace.

• Uni-body frame makes this unit easy to move around
• Seal dimension 16 x 22”
• Tunnel dimension 28 x 18 x 8”
• Cycle speed 15 pkgs. per minute" > Learn More

Two machines built on the same frame. This is Preferred Packaging's Best Seller with Automatic Product Adjustment.

• Combination fully automatic L’ Sealer and tunnel
• Easy load film cradle
• Fully enclosed safety doors
• Easy access control panel
• Self diagnosing Delta PLC
> Learn More

Two machines built on the same frame. This is Preferred Packaging's Best Seller with Automatic Product Adjustment.

• Combination fully automatic L’ Sealer and tunnel
• Easy load film cradle
• Fully enclosed safety doors
• Easy access control panel
• Self diagnosing Delta PLC
> Learn More

The PT 331SCC slits, cuts, creases or perfs in a single pass. Full or partial cross perforate up to 32 creases/perfs with registration mark cut compensation. Slitting formats are easily changeable without the need of replacing cartridges

• 150-350 gsm
• Interchangeable crease / perf dies
• Preset programs for quick job changeover
• Manual cut/crease input for customized jobs > Learn More

The new PT 335SCC Multi is a complete full-bleed finishing system to fit the digital marketplace. Equipped with interchangeable creasing/ perfing dies the PT 335SCC Multi can quickly switch over from perfing to creasing while preventing digital toner cracking. Strike perf capabilities means that the PT 335SCC Multi can now do partial perfs in both directions for “T” or “box” perfs.

• 4" deep pile feeder
• Multi Accessory Output
• 9" color touchscreen > Learn More