Filter Results
- Manufacturer
-
- MBM
- Challenge
- Vivid Matrix
- Bauman
- Martin Yale
- Akiles (35)
- Horizon (34)
- Morgana (32)
- Preferred Pack (28)
- FastBind (10)
- Graphic Whizard (10)
- Formax (9)
- Rhin-O-Tuff (9)
- JBI (6)
- Fujipla (2)
- Tamerica (2)
- Mimaki (2)
- Amerilam (1)
- GBC (1)
- Perfecta (1)
- CUTWORX (19)
- Foliant (12)
- Summa (9)
- Graphic finishing partners (7)
- Micron (7)
- KAMA (2)
- TEC Lighting (2)
- Valiani (2)
- Baum (1)
- Powis (1)
- Lami (1)
Shop finishing equipment at Print & Finishing Solutions.
-
DestroyIt Paper Shredder, 3/16" x 1-1/2" Cross Cut
SM-MBM-3804CC• Shred Volume: 44 gal
• Dimensions (D x W x H): 23 1/4 x 25 1/4 x 38 1/4
• Sheet Capacity: 24-26
• Feed Opening: 16 Inch
• Electrical Requirements: 115 volts
• Horsepower: 1 > Learn MoreUS$2,737.00 -
DestroyIt Cross-Cut Shredder (3/16" x 1-1/2")
SM-MBM-4002CC• Shred Volume: 44 gal
• Dimensions (D x W x H): 23 1/4 x 25 1/4 x 38 1/4
• Sheet Capacity: 24-26
• Feed Opening: 16 Inch
• Electrical Requirements: 115 volts
• Horsepower: 1 3/4 > Learn MoreUS$3,075.00 -
DestroyIt Straight-Cut Shredder 1/4"
SM-MBM-4002SC• Shred Volume: 44 gal
• Dimensions (D x W x H): 23 1/4 x 25 1/4 x 38 1/4
• Sheet Capacity: 32-35
• Feed Opening: 16 Inch
• Electrical Requirements: 115 volts
• Horsepower: 1 3/4 > Learn MoreUS$2,737.00 -
DestroyIt Paper Shredder 3/16" x 1-1/2" Cross-Cut
SM-MBM-3105CC• Strip Cut approved Level 2 security
• Can shred up to 52 sheets in a single pass
• Automatic start/stop controlled by photo cell
• ECC (Electronic Capacity Control) indicator helps prevent paper jams by indicating sheet capacity levels during the shredding process
• Automatic oil injection ensures optimal performance at all times
• Wide 12" feed opening enables heavier loads > Learn MoreUS$4,971.00 -
DestroyIt Cross-Cut Shredder 3/16 x 1-1/2"
SM-MBM-4005CC• Shred Volume: 44 gal
• Dimensions (D x W x H): 23 1/4 x 25 1/4 x 39 3/4
• Sheet Capacity: 37-39
• Feed Opening: 16 Inch
• Electrical Requirements: 115V and 20amp dedicated line
• Horsepower: 2 1/8 > Learn MoreUS$5,845.00 -
DestroyIt Strip-Cut Shredder 1/4"
SM-MBM-4005SC• Sheet Capacity: 50 - 52
• Shred Speed: 40 ft/min
• Category: Office / Department Shredder
• Feed Opening Size: 16"
• Cut Type & Size: Strip Cut, 1/4"
• Security Level: P - 2 > Learn MoreUS$5,075.00 -
Aerocut Nano Air feed Slitter and Cutter
GM-MBM-AEROCUTNANOAEROCUT NANO is the card cutter that can take up to 350gsm stock. It feeds, slits and cross cuts to finish prints into business cards, post cards, flyers and more.
• Intuitive touch screen display
• Stable air suction feed system
• 16 pre-programmed jobs and 40 customized jobs
• Paper weight - 120-350 gsm, depending on paper quality > Learn More -
Aerocut nanoMax Air feed Slitter and Cutter
GM-MBM-AEROCUTNANOMThe MBM AeroCut NanoMax stands out with its quick and easy tool-free slitter position settings, enhanced by four InstaSet Bars and a new Fine Adjustment Knob for precise control. It boasts a user-friendly color touch screen and comes pre-programmed with 31 jobs, while also offering the capacity to store up to 80 additional custom programs, including Flex Mode programs.
• Patented Tri-Suction Feeder
• Intuitive Touch Screen UI
• Versatile InstaSet Bar System > Learn More -
MBM Aerocut Prime Complete
GM-MBM-AEROCUTPRIMEThe Aerocut Prime is an ideal solution for finishing, especially for short-run digitally printed applications, such as business cards, post cards, invitations, greeting cards, leaflets, tickets and more. It features 2 single blade slitters to trim top & bottom margins, and 2 double blade slitters for center gutters and precise accuracy. The durable blades cut stocks up to 400 gsm.
• Sheet Capacity: 4”
• Paper Size: 8.27” x 8.27” – 14.5” x 47”+
• Speed: 24 sheets/min
• New Lytrod Intellicut software included
• 15,120 business cards/hr / 6,720 post cards/hr / 1,260 folding leaflet/hr > Learn More -
Aerocut Velocity Air Feed Slitter / Cutter / Creaser
GM-MBM-AEROCUTVELOThe Aerocut Velocity slitter/cutter/creaser features enhanced productivity and user- friendliness. Patented “Tri-Suction Feeding Mechanism” reduces risks of double feeds and mis-feeds. Creasing pressure can be adjusted in 5 levels instantly by shifting the lever.
• Sheet Capacity: 4” (vs. Classic Capacity: 2 ¼”)
• Speed: 20 sheets/min (vs. Classic Speed: 12 sheets)
• New Lytrod Intellicut software included
• Paper Size: 8. ¼” x 8. ¼” – 14½”x 47”+ (vs. Classic: 8 ¼” x 8 ¼” – 14 3/8” x 20 ½”+) > Learn More -
AeroCut X Slitter-Cutter-Creaser
GM-MBM-AEROCUTXThe Aerocut X is the basic slitter/cutter/creaser. This is the refined model of the original AeroCut launched in 2010, featuring enhanced productivity and user-friendliness.
• Intuitive operation with 7" touch screen
• Flex mode allows for multiple size cards from one page
• Tri-suction feeding mechanism
• Robust slitters and guillotine to cut 400gsm stock
• Lytrod Intellicut software included
> Learn More -
AeroCut X Pro Slitter-Cutter-Creaser
GM-MBM-AEROCUTXPROThe Aerocut X Pro is the top-end slitter/cutter/creaser featuring state-of-the-art technologies. It is designed, built and calibrated with Japanese engineering and craftmanship at its best.
• 20% faster (34 sheets/min)
• Intuitive operation with 10" touch screen
• Creases 4,080 sheets/hr.
• Stacking capacity is 3.9"
• Lytrod Software included
> Learn More