Filter Results
- Manufacturer
-
- MBM
- Graphic Whizard
- Tamerica
- Mimaki
- Bauman
- Akiles (35)
- Horizon (34)
- Morgana (32)
- Preferred Pack (28)
- Challenge (25)
- FastBind (10)
- Formax (9)
- Rhin-O-Tuff (9)
- JBI (6)
- Vivid Matrix (3)
- Fujipla (2)
- Amerilam (1)
- GBC (1)
- Martin Yale (1)
- Perfecta (1)
- CUTWORX (19)
- Foliant (12)
- Summa (9)
- Graphic finishing partners (7)
- Micron (7)
- KAMA (2)
- TEC Lighting (2)
- Valiani (2)
- Baum (1)
- Powis (1)
- Lami (1)
Shop finishing equipment at Print & Finishing Solutions.
-
DestroyIt Shredder Strip-Cut 3/16"
SM-MBM-3104SC• Shred Volume: 32 gal
• Dimensions (D x W x H): 18 1/2 x 21 x 36 1/2
• Sheet Capacity: 22-25
• Feed Opening: 12 Inch
• Electrical Requirements: 115 volts
• Horsepower: 1 > Learn MoreUS$1,895.00 -
DestroyIt Paper Shredder, 1/4"
SM-MBM-3804SC• Shred Volume: 44 gal
• Dimensions (D x W x H): 23 1/4 x 25 1/4 x 38 1/4
• Sheet Capacity: 29-31
• Feed Opening: 16 Inch
• Electrical Requirements: 115 volts
• Horsepower: 1 > Learn MoreUS$2,448.00 -
DestroyIt Paper Shredder, 3/16" x 1-1/2" Cross Cut
SM-MBM-3804CC• Shred Volume: 44 gal
• Dimensions (D x W x H): 23 1/4 x 25 1/4 x 38 1/4
• Sheet Capacity: 24-26
• Feed Opening: 16 Inch
• Electrical Requirements: 115 volts
• Horsepower: 1 > Learn MoreUS$2,737.00 -
DestroyIt Cross-Cut Shredder (3/16" x 1-1/2")
SM-MBM-4002CC• Shred Volume: 44 gal
• Dimensions (D x W x H): 23 1/4 x 25 1/4 x 38 1/4
• Sheet Capacity: 24-26
• Feed Opening: 16 Inch
• Electrical Requirements: 115 volts
• Horsepower: 1 3/4 > Learn MoreUS$3,075.00 -
DestroyIt Straight-Cut Shredder 1/4"
SM-MBM-4002SC• Shred Volume: 44 gal
• Dimensions (D x W x H): 23 1/4 x 25 1/4 x 38 1/4
• Sheet Capacity: 32-35
• Feed Opening: 16 Inch
• Electrical Requirements: 115 volts
• Horsepower: 1 3/4 > Learn MoreUS$2,737.00 -
DestroyIt Paper Shredder 3/16" x 1-1/2" Cross-Cut
SM-MBM-3105CC• Strip Cut approved Level 2 security
• Can shred up to 52 sheets in a single pass
• Automatic start/stop controlled by photo cell
• ECC (Electronic Capacity Control) indicator helps prevent paper jams by indicating sheet capacity levels during the shredding process
• Automatic oil injection ensures optimal performance at all times
• Wide 12" feed opening enables heavier loads > Learn MoreUS$4,971.00 -
DestroyIt Cross-Cut Shredder 3/16 x 1-1/2"
SM-MBM-4005CC• Shred Volume: 44 gal
• Dimensions (D x W x H): 23 1/4 x 25 1/4 x 39 3/4
• Sheet Capacity: 37-39
• Feed Opening: 16 Inch
• Electrical Requirements: 115V and 20amp dedicated line
• Horsepower: 2 1/8 > Learn MoreUS$5,845.00 -
DestroyIt Strip-Cut Shredder 1/4"
SM-MBM-4005SC• Sheet Capacity: 50 - 52
• Shred Speed: 40 ft/min
• Category: Office / Department Shredder
• Feed Opening Size: 16"
• Cut Type & Size: Strip Cut, 1/4"
• Security Level: P - 2 > Learn MoreUS$5,075.00 -
GW Slitter Cutter Creaser
GM-GWH-PT331SCCThe PT 331SCC slits, cuts, creases or perfs in a single pass. Full or partial cross perforate up to 32 creases/perfs with registration mark cut compensation. Slitting formats are easily changeable without the need of replacing cartridges
• 150-350 gsm
• Interchangeable crease / perf dies
• Preset programs for quick job changeover
• Manual cut/crease input for customized jobs > Learn More -
Aerocut Nano Air feed Slitter and Cutter
GM-MBM-AEROCUTNANOAEROCUT NANO is the card cutter that can take up to 350gsm stock. It feeds, slits and cross cuts to finish prints into business cards, post cards, flyers and more.
• Intuitive touch screen display
• Stable air suction feed system
• 16 pre-programmed jobs and 40 customized jobs
• Paper weight - 120-350 gsm, depending on paper quality > Learn More -
Aerocut nanoMax Air feed Slitter and Cutter
GM-MBM-AEROCUTNANOMThe MBM AeroCut NanoMax stands out with its quick and easy tool-free slitter position settings, enhanced by four InstaSet Bars and a new Fine Adjustment Knob for precise control. It boasts a user-friendly color touch screen and comes pre-programmed with 31 jobs, while also offering the capacity to store up to 80 additional custom programs, including Flex Mode programs.
• Patented Tri-Suction Feeder
• Intuitive Touch Screen UI
• Versatile InstaSet Bar System > Learn More -
GW PT335 Multi Slitter Cutter Creaser
GM-GWH-PT335SCCThe new PT 335SCC Multi is a complete full-bleed finishing system to fit the digital marketplace. Equipped with interchangeable creasing/ perfing dies the PT 335SCC Multi can quickly switch over from perfing to creasing while preventing digital toner cracking. Strike perf capabilities means that the PT 335SCC Multi can now do partial perfs in both directions for “T” or “box” perfs.
• 4" deep pile feeder
• Multi Accessory Output
• 9" color touchscreen > Learn More