Shop finishing equipment at Print & Finishing Solutions.

The James Burn CB30QS 17" Automatic Coil Inserter and Crimper streamlines your coil binding workflow. This versatile machine effortlessly inserts, cuts, and crimps plastic coils from 8mm to 20mm into pre-punched documents. Expand your capabilities with optional sizes from 6mm to 30mm! Enjoy tool-free setup and user-friendly operation. For maximum efficiency, integrate the CB30QS with an automatic coil forming machine. This compact, low-maintenance workhorse offers the industry's best value in automatic coil insertion and crimping.

• Quick setup, no tools are required for basic setup and operation
• Automatically inserts pre-cut coil lengths into pre-punched books, simultaneously crimps both ends in a single operation
• Comes with 8 to 20mm Crimper Head > Learn More

The James Burn Koilmatic Automatic Tabletop Coil Inserter is an affordable fully electric tabletop automatic coil inserter and crimper designed with the digital print market in mind. Set up is easy and does not require any tools or shop air to run.

• Paper Size: 8 1/2", 11", A5, & A4 Binding Edges
• Maximum Book Thickness: Up to 5/8" Thick
• Speed: Up to 450 Books per Hour
• Setup Time: Less than 5 Minutes
> Learn More

• Shred Volume: 5 gal. (3/4 for plastic)
• Dimensions (D x W x H): 8 3/4 x 13 1/2 x 21
• Sheet Capacity: 10-12
• Feed Opening: 8 3/4"
• Electrical Requirements: 115 volts
• Horsepower: 1/5 " > Learn More

• Shred Volume: 5 gal. (3/4 for plastic)
• Dimensions (D x W x H): 8 3/4 x 13 1/2 x 21
• Sheet Capacity: 5-6
• Feed Opening: 8 3/4"
• Electrical Requirements: 115 volts
• Horsepower: 1/5 > Learn More

• Shred Volume: 9 gal.
• Dimensions (D x W x H): 11 3/4 x 15 1/2 x 25
• Sheet Capacity: 13-15
• Feed Opening: 9 1/2 Inch
• Electrical Requirements: 115 volts
• Horsepower: 3/4 > Learn More

• Automatic Reverse and Power Cut-Off
• Automatic Stop if Shred Bin is Full
• SPS (Safety Protection System)
• Solid Steel Cutting Shafts
• Easy-Switch
• Patented Safety Flap > Learn More

• Start and stop is automatically controlled by photo sensor
• The 2503's high quality, hardened steel cutting shafts take staples, paper clips, and credit cards
• Dimensions (DxWxH): 14 3/4 x 19 3/4 x 34 1/4
• Sheet Capacity: 12-14
• Feed Opening: 10 1/4 Inch
• Electrical Requirements: 115 volts
• Horsepower: 3/4 > Learn More

• Quiet and powerful single phase motor (3/4 maximum horsepower)
• Fully enclosed, dust proof gearbox housing
• High quality wooden cabinet mounted on casters
• Pull-out bag frame for disposable shred bags
• 26 Gallon Bin Capacity
• Strip Width: 3/16" > Learn More

• Shred Volume: 26 gal
• Dimensions (DxWxH): 18 1/2 x 19 1/2 x 36 1/2
• Sheet Capacity: 12-14*
• Feed Opening: 10 1/4 Inch (260 mm)
• Electrical Requirements: 115 volts
• Horsepower: 1 > Learn More

• Automatic start/stop controlled by photo cell
• Patented Electronic Capacity Control (ECC) indicator prevents jams by monitoring sheet capacity levels during operation
• High quality, hardened steel cutting shafts take staples, paper clips, credit cards, and CDs/DVDs
• Quiet and powerful 1 horse power single phase motor rated for continuous high volume
• Sturdy Twin Drive System with fully enclosed gear box housing
• High quality wooden cabinet mounted on casters > Learn More

• Shred Volume: 32 gal
• Dimensions (D x W x H): 18 1/2 x 21 x 36 1/2
• Sheet Capacity: 22-25
• Feed Opening: 12 Inch
• Electrical Requirements: 115 volts
• Horsepower: 1 > Learn More