Shop finishing equipment at Print & Finishing Solutions.

The FT48 turns any roll laminator into a sign making, flatbed applicator for mounting or laminating
rigid substrates and printed sheets by providing a faster, easier one-step roll application process.

• Simple set-up/operation
• Comfortable 38" table height
• Two-sided work surface > Learn More

The Gfp 200 Series laminators are the affordable alternative to time-consuming hand finishing with rollers and squeegees. Now even the smallest shops can compete for bigger jobs with confidence. The 200 Series will shorten production time, increase profitability and produce consistently professional results.

• Labor-saving quick-grip aluminum film shafts
• Variable roller gap to 1"
• Single pressure adjustment > Learn More

The Gfp 200 Series laminators are the affordable alternative to time-consuming hand finishing with rollers and squeegees. Now even the smallest shops can compete for bigger jobs with confidence. The 200 Series will shorten production time, increase profitability and produce consistently professional results.

• Labor-saving quick-grip aluminum film shafts
• Variable roller gap to 1"
• Single pressure adjustment > Learn More

Create professional-looking books and documents in 15 seconds or less with the Fastback 20. Easy to use, even with no prior experience, thanks to its intuitive one-touch button. Bind documents from 10 to 700 pages thick with minimal inventory requirements. The Fastback 20 is the perfect binding solution for any office, from small businesses to large corporations. It's fast, easy, and produces high-quality results.

• Binds in less than 15 seconds (3.5x faster than punch & bind systems!)
• Binds thin to thick documents from 10-700 pages (or up to 350 sheets)
• Supports lengths up to 12”, including Letter & A4 paper sizes > Learn More

• Shred Volume: 5 gal. (3/4 for plastic)
• Dimensions (D x W x H): 8 3/4 x 13 1/2 x 21
• Sheet Capacity: 10-12
• Feed Opening: 8 3/4"
• Electrical Requirements: 115 volts
• Horsepower: 1/5 " > Learn More

• Shred Volume: 5 gal. (3/4 for plastic)
• Dimensions (D x W x H): 8 3/4 x 13 1/2 x 21
• Sheet Capacity: 5-6
• Feed Opening: 8 3/4"
• Electrical Requirements: 115 volts
• Horsepower: 1/5 > Learn More

• Shred Volume: 9 gal.
• Dimensions (D x W x H): 11 3/4 x 15 1/2 x 25
• Sheet Capacity: 13-15
• Feed Opening: 9 1/2 Inch
• Electrical Requirements: 115 volts
• Horsepower: 3/4 > Learn More

• Automatic Reverse and Power Cut-Off
• Automatic Stop if Shred Bin is Full
• SPS (Safety Protection System)
• Solid Steel Cutting Shafts
• Easy-Switch
• Patented Safety Flap > Learn More

• Start and stop is automatically controlled by photo sensor
• The 2503's high quality, hardened steel cutting shafts take staples, paper clips, and credit cards
• Dimensions (DxWxH): 14 3/4 x 19 3/4 x 34 1/4
• Sheet Capacity: 12-14
• Feed Opening: 10 1/4 Inch
• Electrical Requirements: 115 volts
• Horsepower: 3/4 > Learn More

• Quiet and powerful single phase motor (3/4 maximum horsepower)
• Fully enclosed, dust proof gearbox housing
• High quality wooden cabinet mounted on casters
• Pull-out bag frame for disposable shred bags
• 26 Gallon Bin Capacity
• Strip Width: 3/16" > Learn More

• Shred Volume: 26 gal
• Dimensions (DxWxH): 18 1/2 x 19 1/2 x 36 1/2
• Sheet Capacity: 12-14*
• Feed Opening: 10 1/4 Inch (260 mm)
• Electrical Requirements: 115 volts
• Horsepower: 1 > Learn More

• Automatic start/stop controlled by photo cell
• Patented Electronic Capacity Control (ECC) indicator prevents jams by monitoring sheet capacity levels during operation
• High quality, hardened steel cutting shafts take staples, paper clips, credit cards, and CDs/DVDs
• Quiet and powerful 1 horse power single phase motor rated for continuous high volume
• Sturdy Twin Drive System with fully enclosed gear box housing
• High quality wooden cabinet mounted on casters > Learn More