- Manufacturer
-
- Graphic Whizard
- Tamerica
- GBC
- Perfecta
- Micron
- MBM (39)
- Akiles (35)
- Horizon (34)
- Morgana (32)
- Preferred Pack (28)
- Challenge (25)
- FastBind (10)
- Formax (9)
- Rhin-O-Tuff (9)
- JBI (6)
- Vivid Matrix (3)
- Fujipla (2)
- Mimaki (2)
- Amerilam (1)
- Bauman (1)
- Martin Yale (1)
- CUTWORX (19)
- Foliant (12)
- Summa (9)
- Graphic finishing partners (7)
- KAMA (2)
- TEC Lighting (2)
- Valiani (2)
- Baum (1)
- Powis (1)
- Lami (1)
Shop finishing equipment at Print & Finishing Solutions.
-
GW PT33LSC Automated Laminator
GM-GWH-PT33LSC
Laminate, slit and cut with the GW PT 33LSC. Designed for the digital short-run printer, the PT 33LSC cuts to bleed as well as has variable size encapsulation mode.
• Slits and cuts to size
• Film choices of gloss, matte, soft touch and more
• Pouch mode with variable encapsulation size
• Anti-curl device
> Learn More -
Tamerica TCC-1655 HC 65" Hot & Cold Laminator
GM-TPI-TCC1655HC
The Tamerica TCC-1655 HC is a comprehensive hot & cold roll laminator that caters to a variety of laminating requirements. It efficiently laminates materials ranging from 1.5 to 10 mil thickness at a rate of up to 10 feet per minute and can manage items as wide as 65 inches.
• Take up bar for cold lamination
• 1”. 2.25” and 3” Core Size
• Run / Stop switch w/ reverse function > Learn More -
Tamerica TCC-1200 HC 45" Hot & Cold Laminator
GM-TPI-TCC1200HC
The Tamerica TCC-1200HC is a versatile hot & cold roll laminator that accommodates a range of laminating needs. It can laminate materials from 1.5 to 10 mil thick at a speed of 8.8 feet per minute and can handle items up to 45 inches wide.
• 45” Laminating Width
• Mounts up to 1/2”
• Take up bar for cold lamination > Learn More -
GBC Ultima 65 Thermal Laminator
GM-GBC-ULTIMA65
With the Ultima 65 laminator, it’s easy to protect and preserve your most important printed teaching tools. The EZ Load film system makes loading fool-proof, while the pivoting feed table provides easy access for film changing.
• 27" wide laminating width
• Warms up less than 10 mins
• One touch AutoSpeed feature
• Auto shut off feature for safety
> Learn More -
Numbering, Perforating, Scoring & Slitting System
GM-GWH-6000
Operating at speeds up to 6000 sheets per hour, the “6000” makes fast and easy work of finishing needs.
• Feed sets unglued or glued side
• Accurate .010″ register
• 1 number per head per sheet > Learn More -
Numbering System
GM-GWH-12000
The GW12000 has production speeds of 12000 sph while maintaining registration and accuracy. It has a 30 inch long register board, individually pressure adjustable perf/score/slit, tireless pneumatic heads, and a conveyor outfeed delivery.
• Up to 100 numbering positions per head per sheet
• Optional slitting blade available
• Heads rotate & lock throughout 360 degrees for perfect register > Learn More -
GW Slitter Cutter Creaser
GM-GWH-PT331SCC
The PT 331SCC slits, cuts, creases or perfs in a single pass. Full or partial cross perforate up to 32 creases/perfs with registration mark cut compensation. Slitting formats are easily changeable without the need of replacing cartridges
• 150-350 gsm
• Interchangeable crease / perf dies
• Preset programs for quick job changeover
• Manual cut/crease input for customized jobs > Learn More -
GW PT335 Multi Slitter Cutter Creaser
GM-GWH-PT335SCC
The new PT 335SCC Multi is a complete full-bleed finishing system to fit the digital marketplace. Equipped with interchangeable creasing/ perfing dies the PT 335SCC Multi can quickly switch over from perfing to creasing while preventing digital toner cracking. Strike perf capabilities means that the PT 335SCC Multi can now do partial perfs in both directions for “T” or “box” perfs.
• 4" deep pile feeder
• Multi Accessory Output
• 9" color touchscreen > Learn More -
GW PT8336 SCC Auto Feed/Slit Creasing System
GM-GWH-PT8336SCC
The PT 8336SCC Multi is a complete full-bleed finishing system designed for the digital marketplace. Equipped with interchangeable creasing/perfing dies, the PT 8336CC Multi can quickly switch from perfing to creasing to prevent digital toner cracking.
• 4" deep pile feeder
• Multi accessory output
• 9" color touchscreen
• Built in job creator and 64 job program memory
> Learn More
![](/assets/images/defaults/ajax-loader.gif)