Shop finishing equipment at Print & Finishing Solutions.

28” programmable cutter with hydraulic clamp, power back gauge, touchpad control module, and IR safety light beams on front table.

• Self-diagnostic system with error indication on display
• Electric blade drive with solid steel carrier and adjustable guides
• Electronic back gauge control with variable speed control for manual back gauge setting > Learn More

Programmable cutter with automatic clamp, power back gauge, digital touchpad, and IR safety light beams on front table.

• Pre-programmed for standard paper sizes. Memory key for repeat cuts
• Automatic set function for reference measurement and eject function for pushing out paper
• Self-diagnostic system with error indication on the display > Learn More

Programmable cutter with automatic clamp, power back gauge, and digital touchpad. Cutting width is a full 25 1/2 inches.

• Automatic set function for reference measurement and eject function for pushing out paper
• Self-diagnostic system with error indication on display
• Electronic hand wheel with variable speed control for manual back gauge setting > Learn More

Fully automatic tabletop cutter with electric blade drive, automatic clamp, and EASY CUT blade activation.

• Spindle-guided back gauge with calibrated crank
• Front table digital display (cm or inches) for precise back gauge positioning
• Bright, LED optical cutting line > Learn More

Programmable cutter with automatic clamp, power back gauge, and digital touchpad.

• Memory key for repeat cuts
• Automatic SET function for reference measurement and EJECT function for pushing out paper
• Self-diagnostic system with error indication on display > Learn More

Fully automatic cutter with electric blade drive, automatic clamp, and EASY CUT blade activation.

• Front table digital display (cm or inches) for precise back gauge positioning
• Bright, LED optical cutting line
• Adjustable back gauge with narrow separations and plastic gliders > Learn More

The MBM AeroDieCut is a die cutter with a twist. The fun twist is the fact that it’s the first Die Cutter that can safely use existing traditional platen dies so there is no need to have new expensive steel dies made - plus it can cut, crease, perforate, and emboss in a single pass.

• Small die adapter chase included
• Patented Tri-suction feeding
• Multi-up ability: up to 5 times per sheet
• 4.3” colored touch screen
> Learn More

Dependability and affordable pricing makes this machine a perfect entry level hand press machine which is ideal for people who don’t use a large variety of fastener products. This machine is a low cost machine perfect for the semi-professionals that install snaps, rivets, jean button and self-piercing grommets up to size #3.

• Affordable, compact, and functional
• Can be utilized bench mounted or free standing
• Suitable for a wide range of materials and fastening applications > Learn More

The Micron Tep-3 machine is the machine that bridges the gap between the hobbyists and professionals. The free standing or bench mounted feature of this machine makes it top of the line choice as its deep frame feature allows a comfortable work space and can easily be transported to the job site.

• Affordable, compact, and functional
• Can be utilized bench mounted or free standing
• Suitable for a wide range of materials and fastening applications > Learn More

The PL-20 Machine is a portable fastener attaching machine that has one hopper to accommodate the grommets to be automatically fed through its unique channeling mechanism built to a standard size.

This machine also has a side pocket slot that receives the washers for safely installing your grommets with washers. As it is built to install only one size grommets, this machine can be built to accommodate installation from 1.7 to 3 grommets.

• Installs eyelets in a range of materials
• Manual fill button to automatically turn hopper brushes
• Can built to accommodate self-piercing grommets ranting from #1.7 to #3 > Learn More

The Micron MC-20 Single Cylinder Pneumatic Fastener Attaching Machine is an affordable, adaptable device with replaceable dies for all fastener installations, including grommets/eyelets up to size #5 (5/8" ID), rivets, jean buttons, and snaps.

• This machine can accommodate dies for snaps, rivets and buttons
• Features a laser pointer, optional foot pedal and comes standard with safety system
• Optional hand and foot pedal operations > Learn More

The Micron MC-20 Single Cylinder Pneumatic Fastener Attaching Machine is an affordable, adaptable device with replaceable dies for all fastener installations, including grommets/eyelets up to size #5 (5/8" ID), rivets, jean buttons, and snaps.

• This machine can accommodate dies for snaps, rivets and buttons
• Features a laser pointer, optional foot pedal and comes standard with safety system
• Optional hand and foot pedal operations > Learn More