Shop finishing equipment at Print & Finishing Solutions.

28” programmable cutter with hydraulic clamp, power back gauge, touchpad control module, and IR safety light beams on front table.

• Self-diagnostic system with error indication on display
• Electric blade drive with solid steel carrier and adjustable guides
• Electronic back gauge control with variable speed control for manual back gauge setting > Learn More

Programmable cutter with automatic clamp, power back gauge, digital touchpad, and IR safety light beams on front table.

• Pre-programmed for standard paper sizes. Memory key for repeat cuts
• Automatic set function for reference measurement and eject function for pushing out paper
• Self-diagnostic system with error indication on the display > Learn More

Programmable cutter with automatic clamp, power back gauge, and digital touchpad. Cutting width is a full 25 1/2 inches.

• Automatic set function for reference measurement and eject function for pushing out paper
• Self-diagnostic system with error indication on display
• Electronic hand wheel with variable speed control for manual back gauge setting > Learn More

Fully automatic tabletop cutter with electric blade drive, automatic clamp, and EASY CUT blade activation.

• Spindle-guided back gauge with calibrated crank
• Front table digital display (cm or inches) for precise back gauge positioning
• Bright, LED optical cutting line > Learn More

Programmable cutter with automatic clamp, power back gauge, and digital touchpad.

• Memory key for repeat cuts
• Automatic SET function for reference measurement and EJECT function for pushing out paper
• Self-diagnostic system with error indication on display > Learn More

Fully automatic cutter with electric blade drive, automatic clamp, and EASY CUT blade activation.

• Front table digital display (cm or inches) for precise back gauge positioning
• Bright, LED optical cutting line
• Adjustable back gauge with narrow separations and plastic gliders > Learn More

The MBM AeroDieCut is a die cutter with a twist. The fun twist is the fact that it’s the first Die Cutter that can safely use existing traditional platen dies so there is no need to have new expensive steel dies made - plus it can cut, crease, perforate, and emboss in a single pass.

• Small die adapter chase included
• Patented Tri-suction feeding
• Multi-up ability: up to 5 times per sheet
• 4.3” colored touch screen
> Learn More

Dependable automatic folder that comes pre-programmed with 18 standard folds. Up to 12 custom jobs can be stored in memory.

• Features automatic folding position setting
• Folding patterns can be stored and recalled via touch screen
• Fastest folding speed in its class > Learn More

Introducing the all new QTopic-380 print on-demand single-sided lamination system. Sleeking option is pre-loaded and included. Spot coat gloss, matte, holographics and sleeking foils with this low cost laminator.

• Maximum sheet size capabilities up to 15”W x 48”L
• Pneumatic chrome lamination roller sets
• Adjustable de-curling system
• Rear burst roller ensures excellent results. > Learn More

The FOLIANT Vega 400 A is a very compact industrial laminating machine designed for heavy-duty lamination of digitally printed material. It is equipped with an integrated deep pile vacuum feeder, high-speed bump separator, non-sticky pressure roller, in-run adjustable twin de-curl bar and overlap system.

• Maximum speed: 59 feet/min.
• Load capacity: 11"
• Max. sheet size: 14.9" x 25.9"
• Warm up time: 8 mins.
> Learn More

Due to its high pneumatic pressure system, format and performance, the Foliant Vega 400SF is suitable for all jobs – all kinds of digitally printed sheets and high volumes of offset printed sheets size 14″ x 20″ for lamination. It is equipped with integrated deep pile suction feeder, pneumatic high-speed bump separator, adjustable dual de-curl bar and overlap system.

• Easy operation
• Rising pile suction feeder
• Single-sided thermal industrial laminator > Learn More

The Foliant Mercury 400 NG is a Compact Industrial Laminating Machine constructed for heavy-duty digital and offset output. It is equipped with a Foliant integrated suction feeder and a high-speed bump separator. Due to its high-pressure system, format and performance, the machine is suitable for all jobs – all kinds of digitally printed sheets and high volumes of offset printed sheets, size 14″ x 20″ for lamination.

• Easy operation
• Equipped with a rising back pile separation stream feeder with a Foliant suction feed head
• Single-sided thermal industrial laminator > Learn More