Finishing

24 Results

Per Page
  • Challenge Handy Padder

    Code: GM-CMC-HANDYPADDER

    The Challenge HANDY PADDER design provides a portable and compact table top padding device for the right price.

    • Easy 1-2-3 Operation
    • Large capacity
    • Self-aligning gravity load
    • Table-top design

    > Learn More
  • Challenge 305TC Paper Cutter

    Code: GM-CMC-305TC


    The Challenge Champion 305 continues the company's well known excellence for innovation, reliability and durability. The industry workhorse for over thirty years. Powerful, accurate, hydraulic clamping and cutting with a 30 1/2" cut width and 4" clamp opening.

    • Up to 26 cuts per minute
    • Virtually maintenance-free design
    • 30.5" / 77.5 cm cutting width, 4" / 10.2 cm clamp opening > Learn More
  • Challenge Titan 265TC Paper Cutter

    Code: GM-CMC-TITAN265TC

    The Titan 265 is based on a solid cast iron and steel construction for maximum durability. Industry-exclusive UHMW gib surfaces, composite bushings, and a one-inch thick solid metal table require virtually zero maintenance for years of trouble-free operation.

    • 10.5" Color Touch Screen control panel
    • Programmable Clamp pressure per cut
    • Low-pressure pre-clamping
    • JDF and network capable hardware
    > Learn More
  • Challenge Cornering Machine (Hydraulic)

    Code: GM-CMC-SCM

    The Challenge hydraulic powered Single Cornering Machine delivers up to ten times more cornering capacity than electric powered table-top models in the market.

    • 6 Sizes of Cornering Blades
    • Handles Any Size Sheet
    • 4" Lift Capacity
    • Precise Cutting Action
    • Gravity Chip Disposal > Learn More
  • Challenge Titan 230TC Paper Cutter

    Code: GM-CMC-TITAN230TC

    Titan 230 is built on a foundation of sold cast iron and steel. It meets the toughest safety standards in the industry today. UL and CE Certified. Made in the USA.

    • Fully hydraulic cutting and clamping
    • Steel construction ensures trouble free operation
    • Bright red LED line ight
    • Fully programmable controller
    > Learn More
  • Challenge Titan 200TC Cutter

    Code: GM-CMC-TITAN200TC

    The Challenge Titan 200 meets the toughest safety standards in the industry. Equipped with light safety curtains, enclosed rear table, two-hand cut buttons and knife safety latch. UL and CE Certified. Made in the USA.

    • Fully hydraulic cutting and clamping
    • Solid cast iron and steel construction
    • Bright red LED line light easy to see and needs no replacement
    • Solid 1" thick tool grade aluminum table > Learn More
  • Challenge CMT-330TC Book Trimmer

    Code: GM-CMC-330TC

    The new Challenge CMT 330TC has expanded capability to finish cut LANDSCAPE FORMATTED BOOKS up to 12.1” tall by 12.9” wide and down to 5.875” tall by 3.937” wide. Made in the USA.

    • Powerful hydraulic cutting and clamping pressure
    • Cuts up to 2” book
    • 10.5” color touch screen display
    • Easy to operate
    > Learn More
  • Challenge iCutter 1160

    Code: GM-CMC-ICUT1160

    Challenege's Heavy Duty Paper Cutters, the iCutter Series, provides precise, trouble-free operation at an incredible value. With backgauge precision, and advanced controlling system, it is construed out of cast iron and steel frame.

    • Manual/semi-automatic and automatic operating modes
    • AC servomotor, ball screw and linear guide
    • Adjustable clamping pressure
    • Table light/optical cut line indicator > Learn More
  • Challenge iCutter 1370

    Code: GM-CMC-ICUT1370

    Challenege's Heavy Duty Paper Cutters, the iCutter Series, provides precise, trouble-free operation at an incredible value. With backgauge precision, and advanced controlling system, it is construed out of cast iron and steel frame.

    • Manual/semi-automatic and automatic operating modes
    • AC servomotor, ball screw and linear guide
    • Adjustable clamping pressure
    • Table light/optical cut line indicator > Learn More
  • Challenge iCutter 780

    Code: GM-CMC-ICUT780

    Challenege's Heavy Duty Paper Cutters, the iCutter Series, provides precise, trouble-free operation at an incredible value. With backgauge precision, and advanced controlling system, it is construed out of cast iron and steel frame.

    • Manual/semi-automatic and automatic operating modes
    • AC servomotor, ball screw and linear guide
    • Adjustable clamping pressure
    • Table light/optical cut line indicator > Learn More
  • Challenge CMT-130TC Book Trimmer

    Code: GM-CMC-130TC

    The ultimate book trimming solution necessary to be competitive, the Challenge CMT 130TC book trimmer is built from steel and cast-iron. The system can be configured as a hand-feed off-line trimmer for entry level cost-effective book finishing. Made in the USA.

    • Powerful hydraulic cutting and clamping pressure
    • Cuts up to 2” book
    • 10.5” color touch screen display
    • Easy to operate > Learn More
  • Challenge 370TC Paper Cutter

    Code: GM-CMC-370TC


    The Challenge Champion 370 continues the company's well known excellence for innovation, reliability and durability. The industry workhorse for over thirty years. Powerful, accurate, hydraulic clamping and cutting with a 37" cut width and 5 1/8" clamp opening.

    • Up to 24 cuts per minute
    • Virtually maintenance-free design
    • 37" cutting width, 5 1/8" clamp opening
    • Hydraulic clamping & cutting > Learn More
To top