Shop finishing equipment at Print & Finishing Solutions.

35 Results

Per Page
  • Challenge Cornering Machine (Hydraulic)

    GM-CMC-SCM

    The Challenge hydraulic powered Single Cornering Machine delivers up to ten times more cornering capacity than electric powered table-top models in the market.

    • 6 Sizes of Cornering Blades
    • Handles Any Size Sheet
    • 4" Lift Capacity
    • Precise Cutting Action
    • Gravity Chip Disposal > Learn More
  • Challenge CHAMP 185Pro Paper Cutter

    GM-CMC-CHAMP185PRO
    Proudly manufactured in Michigan, USA, the CHAMP 185 series delivers hydraulic powered strength and durability with easy to use controls to the 18” cutter market that is crowded with weaker electric motor powered machines. The CHAMP's strong ¼” thick cold rolled steel weldment frame offers a superior design allowing operators to cut today's hard stocks accurately in piles of up to 3.25” high.

    • Adjustable angle 7.1” color touch screen controller
    • Micro adjustment backgauge with hand knob
    • Repeat and loop commands to simply program repetitive cut sequences
    • Instant job generation from cuts history (cut-and-record) > Learn More
  • Challenge Titan 200TC Cutter

    GM-CMC-TITAN200TC

    The Challenge Titan 200 meets the toughest safety standards in the industry. Equipped with light safety curtains, enclosed rear table, two-hand cut buttons and knife safety latch. UL and CE Certified. Made in the USA.

    • Fully hydraulic cutting and clamping
    • Solid cast iron and steel construction
    • Bright red LED line light easy to see and needs no replacement
    • Solid 1" thick tool grade aluminum table > Learn More
  • Challenge Titan 230TC Paper Cutter

    GM-CMC-TITAN230TC

    Titan 230 is built on a foundation of sold cast iron and steel. It meets the toughest safety standards in the industry today. UL and CE Certified. Made in the USA.

    • 10.5" Color Touch Screen control panel
    • Electronic Clamp Pressure control
    • Repeat and Loop commands streamline program entry
    • Auto-programming features of sheet division and label cutting with animated graphics
    > Learn More
  • Challenge Titan 265TC Paper Cutter

    GM-CMC-TITAN265TC

    The Titan 265 is based on a solid cast iron and steel construction for maximum durability. Industry-exclusive UHMW gib surfaces, composite bushings, and a one-inch thick solid metal table require virtually zero maintenance for years of trouble-free operation.

    • 10.5" Color Touch Screen control panel
    • Programmable Clamp pressure per cut
    • Low-pressure pre-clamping
    • JDF and network capable hardware
    > Learn More
  • Challenge 305TC Paper Cutter

    GM-CMC-305TC


    The Challenge Champion 305 continues the company's well known excellence for innovation, reliability and durability. The industry workhorse for over thirty years. Powerful, accurate, hydraulic clamping and cutting with a 30 1/2" cut width and 4" clamp opening.

    • Up to 26 cuts per minute
    • Virtually maintenance-free design
    • 30.5" / 77.5 cm cutting width, 4" / 10.2 cm clamp opening > Learn More
  • Challenge 370TC Paper Cutter

    GM-CMC-370TC


    The Challenge Champion 370 continues the company's well known excellence for innovation, reliability and durability. The industry workhorse for over thirty years. Powerful, accurate, hydraulic clamping and cutting with a 37" cut width and 5 1/8" clamp opening.

    • Up to 24 cuts per minute
    • Virtually maintenance-free design
    • 37" cutting width, 5 1/8" clamp opening
    • Hydraulic clamping & cutting > Learn More
  • Challenge iCutter 780

    GM-CMC-ICUT780

    Challenege's Heavy Duty Paper Cutters, the iCutter Series, provides precise, trouble-free operation at an incredible value. With backgauge precision, and advanced controlling system, it is construed out of cast iron and steel frame.

    • Manual/semi-automatic and automatic operating modes
    • AC servomotor, ball screw and linear guide
    • Adjustable clamping pressure
    • Table light/optical cut line indicator > Learn More
  • Challenge iCutter 1160

    GM-CMC-ICUT1160

    Challenge's Heavy Duty Paper Cutters, the iCutter Series, provides precise, trouble-free operation at an incredible value. With backgauge precision, and advanced controlling system, it is construed out of cast iron and steel frame.

    • Manual/semi-automatic and automatic operating modes
    • AC servomotor, ball screw and linear guide
    • Adjustable clamping pressure
    • Table light/optical cut line indicator > Learn More
  • Challenge iCutter 1370

    GM-CMC-ICUT1370

    Challenege's Heavy Duty Paper Cutters, the iCutter Series, provides precise, trouble-free operation at an incredible value. With backgauge precision, and advanced controlling system, it is construed out of cast iron and steel frame.

    • Manual/semi-automatic and automatic operating modes
    • AC servomotor, ball screw and linear guide
    • Adjustable clamping pressure
    • Table light/optical cut line indicator > Learn More
  • Challenge Handy Drill

    GM-CMC-HANDYDRILL

    Handy Drill with 2-1/2” lift capacity. Machine can be converted to a 2” maximum lift capacity for a wider range of available hole sizes (1/8” to 1/2").

    • Safety features
    • Conveniently located chip collector cups
    • Adjustable backgauge stops
    • 4 different drill bit sizes (1/4”, 5/16”, 3/8”, 1/2") > Learn More
  • Challenge JF Single Spindle Drill

    GM-CMC-JF

    A manual, foot pedal operated drill with 2" drilling capacity. Auto-trip side guide for multi-hole patterns.

    • 2" Drilling Capacity
    • 13 Hollow Drill Bit Sizes
    • Foot Pedal Operation
    • Automatic Paper Chip Removal
    > Learn More
To top